55EC9300, 77EC9800 LG Oled Tv Owners Guide

							ENGLISH
21ASSEMBLING AND PREPARING
3 Pull down the built-in camera when you are not using it.
Name of Parts for the Built-In Camera
Microphone
Camera Lens
Protective 
 
Film
Checking the Camera’s Shooting Range
1  Press the  (Home)  button on the remote control to 
display the Home menu.
2 Select  CAMERA  and then press the  Wheel (OK) 
button.
 yThe optimal distance from the camera to use the motion recognition function is between 1.5 m (5 ft) and 4.5 m  (15 ft).
 NOTE   
						

							ENGLISH
22MAKING CONNECTIONS
MAKING CONNECTIONS
 yImage shown may differ from your TV.You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For\
 more information on external device’s connection, refer to the manual provided with each device. 
Connecting to an Antenna or Cable
Connect an antenna, cable, or cable box to watch TV while referring to t\
he following. The illustrations may differ from the actual items and a RF cable is optional.
 yMake sure not to bend the copper wire of the RF cable.
Copper wire
 yComplete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV.
 CAUTION
 yIf you record a TV program on a DVD recorder or VCR, make sure to connec\
t the TV signal input cable to the TV through a DVD recorder or VCR. For more information of recording, refer to the manual \
provided with the connected device.
 yThe external device connections shown may differ slightly from illustrat\
ions in this manual.
 yConnect external devices to the TV regardless of the order of the TV por\
t.
 yIf you connect a gaming device to the TV, use the cable supplied with th\
e gaming device.
 yRefer to the external equipment’s manual for operating instructions.
 NOTE
 yUse a signal splitter to use more than 2 TVs.
 yDTV Audio Supported Codec: MPEG, Dolby Digital.
 NOTE
(*Not Provided) Coaxial (75Ω)
Antenna
Antena VHF
Antena UHF
Terminal
(*Not Provided) Coaxial (75Ω)
Antenna
Antena VHF
Antena UHF
Terminal
(For 55EC9300)(For 77EC9800)   
						

							ENGLISH
23MAKING CONNECTIONS
HDMI
Connecting to an HD receiver, DVD Player, or VCR
Connect an HD receiver, DVD Player, or VCR to the TV and select an appro\
priate input mode.
HDMI Connection
HDMI is the best way to connect a device.
Transmits digital video and audio signals from an external device to the\
 TV. Connect the external device and the TV with the HDMI cable as shown in the following illustration.
 
y Use the latest High Speed HDMI™ Cable that supports CEC (Customer El\
ectronics Control) function. 
 
y High Speed HDMI™ Cables are tested to carry an HD signal up to 1080p \
and higher.
 
y HDMI Audio Supported Format: PCM (Up to 192 kHz, 32 kHz / 44.1 kHz / 48\
 kHz / 96 kHz / 192 kHz)
 
y When you use an HDMI cable (HDMI port3), it is recommended that you us\
e the cable provided. If you use a regular HDMI 
cable, use a high-speed HDMI cable (3m or less). (For 77EC9800)
 NOTE
   Choose any HDMI input port to connect.    It does not matter which port you use.
DVD / Blu-Ray / HD Cable Box / HD STB
(*Not Provided)
(For 55EC9300)
ARC (Audio Return Channel)
 yWhen connected with a high-speed HDMI cable, digital audio can be sent t\
o a compactible device without an additional optical audio cable.
 yARC is only supported on the HDMI/DVI IN 1 (ARC) port. An external aud\
io device that supports ARC should be connected to HDMI/DVI IN 1 (ARC) if you wish to use ARC.   
						

							ENGLISH
24MAKING CONNECTIONS
ARC (Audio Return Channel)
 yWhen connected with a high-speed HDMI cable, digital audio can be sent t\
o a compactible device without an additional optical audio cable.
 yARC is only supported on the HDMI/DVI IN 2 (ARC) port. An external aud\
io device that supports ARC should be connected to HDMI/DVI IN 2 (ARC) if you wish to use ARC.
HDMIDVD / Blu-Ray / HD Cable Box / HD STB
HDMI Cable
(For 77EC9800)4K@ 60Hz Support Format
ResolutionFramerate(Hz)
Color Depth / Chroma Sampling
8 bit10 bit12 bit
3840 X 2160p4096 X 2160p59.9460.00
YCbCr4:2:0YCbCr 4:2:01
YCbCr 4:2:21
YCbCr4:4:41--
RGB4:4:41--
1 Supported at HDMI3 Port only
 yHDMI specifications may be different for each input port, so make sure to check the device specifications before connecting.
 yContact customer service for more information on the HDMI specifications of each input port.
 NOTE   
						

							ENGLISH
25MAKING CONNECTIONS
AUDIO OUTDVI OUT
DVI to HDMI Connection
Transmits the digital video signal from an external device to the TV. Co\
nnect the external device and the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, con\
nect an audio cable.
Choose any HDMI input port to connect. It does not matter which port you use.
 yWhen using the HDMI/DVI cable, Single link is only supported.
 NOTE
AUDIO OUTDVI OUT
(*Not Provided)
(*Not Provided)
(*Not Provided)
(*Not Provided)
DVD / Blu-Ray /  HD Cable Box
DVD / Blu-Ray /  HD Cable Box
(For 55EC9300)(For 77EC9800)   
						

							ENGLISH
26MAKING CONNECTIONS
Connecting to a Mobile Phone
Mobile High-definition Link (MHL) is an interface for transmitting dig\
ital audio/visual signals from mobile phones to television sets.
 
y Connect the mobile phone to the HDMI/DVI IN 4 (MHL) port to view the p\
hone screen on the TV.
 
y This only works with an MHL-enabled phone.
 
y With some MHL supporting mobile phones, you can use the TV remote to con\
trol the phone.  
 
y An MHL passive cable is needed to connect the TV and a mobile phone.
 
y Remove the MHL cable from the TV when:  
- the MHL function is disabled 
- your mobile device is fully charged in standby mode
 NOTE
(*Not Pr
ovided)
MHL Cable
Mobile phone
(*Not Provided)
MHL Cable
Mobile phone
(For 77EC9800)
(For 55EC9300)   
						

							ENGLISH
27MAKING CONNECTIONS
Component Connection
Transmits analog video and audio signals from an external device to the \
TV. Connect the external device and the TV with a component cable as shown in the following illustration.
 
y If cables are installed incorrectly, it could cause the image to display\
 in black and white or with distorted color.
 
y Check to ensure the cables are matched with the corresponding color conn\
ection.
 NOTE
INCOMPONENTAV
VIDEO
AUDIOYPBPR
VIDEOAUDIO
LR
YELLOW
YELLOWWHITEREDREDBLUEGREEN
WHITEREDREDBLUEGREEN
WHITEREDREDBLUEGREEN
(Use the composite video cable provided.)
DVD / Blu-Ray / HD Cable Box
GREEN
(Use the component video cable provided.)
(*Not Provided)(*Not Provided)
INCOMPONENTAV
VIDEO AUDIOYPBPR
VIDEOAUDIO
LR
YELLOW
YELLOWWHITEREDREDBLUEGREEN
WHITEREDREDBLUEGREEN
WHITEREDREDBLUEGREEN
(Use the composite video cable provided.)
DVD / Blu-Ray / HD Cable Box
GREEN
(Use the component video cable provided.)
(*Not Provided)(*Not Provided)
(For 55EC9300)(For 77EC9800)   
						

							ENGLISH
28MAKING CONNECTIONS
Composite Connection
Transmits analog video and audio signals from an external device to the \
TV. Connect the external device and the TV with the composite cable as shown in the following illustration.
 
y If you have a mono VCR, connect the audio cable from the VCR to the AUDI\
O L/MONO jack of the TV.
 
y Check to ensure the cables are matched with the corresponding color conn\
ection.
 NOTE
INCOMPONENTAV
VIDEO
AUDIOYPBPR
VIDEOMONO()AUDIO
L R
YELLOWWHITERED
WHITEYELLOWRED
WHITEYELLOWRED
VCR / DVD / Blu-Ray / HD Cable Box
YELLOW
(Use the composite video cable provided.)
(*Not Provided)
INCOMPONENTAV
VIDEOAUDIOYPBPR
VIDEOMONO()AUDIO
L R
YELLOWWHITERED
WHITEYELLOWRED
WHITEYELLOW
RED
VCR / DVD / Blu-Ray / HD Cable Box
YELLOW
(Use the composite video cable provided.)
(*Not Provided)
(For 55EC9300)(For 77EC9800)   
						

							ENGLISH
29MAKING CONNECTIONS
Connecting a PC
 
y Use an HDMI connection for the best image quality.
 
y Depending upon the graphics card, DOS mode video may not work if a HDMI \
to DVI Cable is in use.
 
y In PC mode, there may be noise associated with the resolution, vertical patter\
n, contrast or brightness. If noise is present, 
change the PC output to another resolution, change the refresh rate to a\
nother rate or adjust the brightness and contrast on the 
PICTURE menu until the picture is clear.
 
y The synchronization input form for Horizontal and Vertical frequencies i\
s separate.
 
y Depending upon the graphics card, some resolution settings may not allow\
 the image to be positioned on the screen properly.
 
y If you are using DVI out from a PC, you have to connect analog audio sep\
arately. Refer to the instructions on the next page.
 
y When using the HDMI/DVI cable, Single link is only supported.
 
y If Ultra HD content is played on your PC, video or audio may become disr\
upted intermittently depending upon your PC’s 
performance. (For 77EC9800)
 NOTE
HDMI Connection or DVI to HDMI Connection
Choose method A or B to make connection.
Method A: HDMI Connection
HDMIAUDIO OUT
DVI OUT
(*Not Provided)
PC
Choose any HDMI input port to connect. It does not matter which port you use.
HDMIAUDIO OUT DVI OUT
HDMI Cable
PC
(For 55EC9300)(For 77EC9800)   
						

							ENGLISH
30MAKING CONNECTIONS
Method B: DVI to HDMI Connection
HDMIAUDIO OUTDVI OUT
PC
(*Not Provided)(*Not Provided)
Choose any HDMI input port to connect.It does not matter which port you use.
HDMIAUDIO OUT DVI OUT
PC
(*Not Provided)(*Not Provided)
(For 55EC9300)(For 77EC9800)