Aaton Cam VHR 16 Users Manual
Here you can view all the pages of manual Aaton Cam VHR 16 Users Manual. The Aaton manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 21
21 VITC Position • “Vitc Position” allows you to choose the position of the Vitc lines. Choice from 10 to 23 in PAL (Aaton recommends line 19), from 13 and 19 in NTSC. • “Parity” allows you to select the parity of the Vitc lines “Odd” and “Even”. Make sure that your Post-production tools run properly with the selected value.
Page 22
22 Time & Cam Position • The camera inserts the camera speed and magazine footage, as well as Timecode information in the video image. These sub-menus allow you to position the information anywhere on the monitor screen. Use the “Up”, “Down”, “Left” and “Right” keys to move, press “Exit” to return to the Main menu
Page 23
23 Frame Store • The “Store” menu allows you to store one video image and compare it against the currently incoming images. • Press the “Store” key. Select “View/Store” and press “Right” key. The mes- sage “Shift+store to store” is displayed, proposing to store an image. Pro- ceed. Note : the message position on screen can be modified by using the “Up/ Down/Right/Left” keys. VHR oonn ooffff sshhiifftteexxiitt mmeennuussttoorree ShiftExit Down Up StoreMenu RightLeft
Page 24
24 Once the image has been memorized, you can compare it to the incoming images. The memorized image is superimposed and can be seen with two different types of “view” : “Blend” or “Checker”. Press “Menu” key to scroll both views. Press “Exit” key to leave the Store mode. Note : the image remains stored only until another one is stored or, the VHR is powered off Stored image. “Blend” mode. “Checker” mode.
Page 25
25 Other information displayed on the VHR Once the camera has been initialized with Timecode, a “Last shoot” window appears on the camera display at each shoot stop. This window shows the following information : Timecode In, Timecode Out, EL (elapse). The shoot duration is always expressed at 24 fps (bottom EL line). If the camera is running at a higher or lower speed, the top EL line shows the shoot duration at this selected speed. In this case, the bottom EL line automati- cally converts this...
Page 26
26 Other information displayed on the VHR When the video menu is generated on screen, the camera display shows the above information, meaning the video image and its setting modes are accessible through the connected monitor. Press the “Exit” key to escape.
Page 27
27 Other information displayed on the VHR While pressing the “Off” key, a help screen is displayed, showing which parameters can be modified in combination with this key. Note : please refer to the Contrast and Backlight menu.
Page 28
28 Other information displayed on the VHR While pressing the “Shift” key, a help screen is displayed, showing which parameters can be modified in combination with this key. Note : please refer to Direct access control panel menu.