Aaxa Projector P2jr Pico User Manual

							aaxa
TECHNOLOGIES
User Guide
P2jr Pico Projector 
						

							Caution!
WARNING:  Please use this product as instructed.  Misuse may cause 
injury or death.
DO NOT use while driving
DO NOT expose to water or wet 
surfaces.  Electric shock may occur
DO NOT expose the LED to your 
eyes or the eyes of others
 
DO NOT block or restrict airflow 
from ventilation holes as this may 
cause the projector to overheat
Keep the projector, battery, or  
charger away from any heat sourcesCaution for Battery Use
• Do not pierce or puncture the battery 
with sharp objects
• Do not heat the product or expose it to 
high temperature.
• Do not wet it or place it in any liquid 
						

							Table of Contents
Chapter 1: P2jr at a glanceMain Unit
Keypad
Accessories 
Chapter 2: Getting Started Powering On / OFF
Focus Adjustment  / Throw 
Distance
External Inputs /Output Sources
Connecting to a Computer
Connecting to Composite Video
Connecting to HDMI Video
Connecting a MicroSD Card
2
2
3
4
5
5
6
7
8
12
14
16 18
20
20
21
22
24
26
28
29
32
32
34
Connecting to a USB drive
Chapter 3: Menu Screens Main menu
File Menu System
Video Player Menu
Photo Viewer Menu
Music Player Menu
Text Viewer Menu
Setup Menu
Chapter 4: Technical Details Troubleshooting
Specifications
1 
						

							P2jr at a Glance
Power Button
Mini A/V / VGA Input Power Input
Projection LensCooling Fan
Directional Pad
USB Port
Mini HDMI
Chapter 1
Main Unit
Charge Indicator
MicroSD Card Slot
Back Button
Focus Adjustment
Speaker
Confirm Selection
2 
						

							Keypad
3
Power ON / OFF
Exit/Back
Confirm Selection
Directional Keypad
This key allows you to return to 
the previous menu or exit from 
the media player option. 
Use these keys in highlight the 
selection you which to choose. Use this key to select the 
current highlighted option.
*More detailed direction of the keypad will be discussed in individual s\
ubsections. Holding  down the power 
button for 3 seconds will 
either turn the P2Jr 
ON or OFF. 
						

							Accessories
4
*Under various circumstances, the actual accessories may be different from 
those shown in the pictures above.
Power AdapterVGA Cable
Composite A/V  Cable
Sold Separately
Mini-Full HDMI
Standard Accessories 
						

							Getting Started
1. Connect the power cord to the P2jr.
2. Connect the wall plug into the wall power source.
3. Press the POWER button and hold for 2-3 seconds to switch on or switch 
off the power
• The LED turns red while charging.
• The LED turns green when charging is finished.
• 4 hours of charge time is required to reach a full charge.
5
Powering ON the projector
Chapter 2
Powering OFF the projector
1. Press and hold the power button for 3 seconds.
2. The optical engine should power off and the fan should stop spinning.
Note: The P2jr Projector battery does not charge when it is in operation. 
						

							Focus Adjusment / Throw Distance
Focus Adjustment
1. Spin the focus wheel up or down until the image becomes 
clear.
2. The recommended focus distance for this projector is 12” to 
infinity.
6
DIAGONAL SCREEN SIZE
4:3 Aspect  Ratio
Throw Distance Chart
Distance inch (“)Diagonal Inch (“)
Throw Ratio 1.25:1
*minimum throw distance: 10 inches
8
12
16
24
31
39
47
55
10
15
20
30
40
50
60
70 
						

							External Inputs/Outputs
7LaptopDesktopUSB StickMicro SD Card
HDMI Cable
Composite Cable 
						

							Connecting to a Computer via VGA
Connect the large end of the 8
VGA Cord
to your computer’s
VGA Adapter
Connect the small end of theVGA Cordto your P2jr’s 
VGA Adapter
Step 1:
Step 2:
Step 3:
In the Main Menu 
Select “VGA” icon