Home > Accel > Pedal Board > Accel FX8 Command Center Switcher Looper User Manual

Accel FX8 Command Center Switcher Looper User Manual

Add to Favourites
    Download as PDF

    View the Accel FX8 Command Center Switcher Looper User Manual for free. All the Accel manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 SWITCHER / LOOPER Features: - Compact footprint: 18.90” (480mm) L x 2.36” (60mm) W x 2.05” (52mm) H - Instant recall (no latency). - True bypass design. - 8 loops in total, 7 series loops and 1 separate loop. - 2 dedicated foot switches (latch type). - Individual Tuner/Mute switch. - Master bypass access. - Store up to 80 presets, 4 presets per banks, 20 banks. - Programmable Live/Rehearsal mode: (Active Bank Setup Mode...
    Page 2 2 Contents Introduction .............................................................................................................................................................................. 3 Overview ................................................................................................................................................................................. 3 (1) BANK DN...
    Page 3 3 Introduction The Accel FX8 Command Center is a convenient, compact and intuitive guitar effect pedal switcher. It is primarily designed to switch multiple guitar effects pedals at the same time using a single footswitch. Different combinations of effects pedals can be stored on different patches allowing the player to easily change between multiple effects loops with the ease of a single footswitch. W hen using your Accel programmable switcher it is important to understand which mode...
    Page 4 4 (2) BANK UP BANK UP switch (SW2); In “Recall Mode”, press this switch to increase the bank number. In “Program Mode”, press this switch to program the amp footswitches (FS1/FS2). Holding down this switch will toggle between “Recall Mode” and “Active Bank Setup Mode (ABS)”, for more complete of the “active bank setup mode” (page 5). (3) A B C D In Recall Mode: Preset switches “A” “B” “C” or “D” recall previously programmed loops for those switches. (Pressing the same preset switch again...
    Start reading Accel FX8 Command Center Switcher Looper User Manual

    Related Manuals for Accel FX8 Command Center Switcher Looper User Manual

    All Accel manuals