Accel Power Source 8 Power Supply User Manual

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
USER’S MANUAL 
 
 
 
 
 
 
 
 
 
 
 
 
  

 
 
Table of Contents 
What’s Included & Introduction     .………..................1 
General Information, Warnings & Cautions ............... 2 
Warnings & Caution……………………………………..3-4 
Component I.D. Drawing & Features……………........5-7 
Power Supply Dimensional Drawing……………….. . 8 
Specifications…………………………………………....9 
Power Supply Mounting Instructions…………………10 
Warranty…………………………………………………11 
What’s Included  
(1)  Accel FX Power Source 8 Power Supply  
(1)  Users Manual 
(1)    AC Input cord 
(2)    7.9”...

 
 
General information: (Quick View)  
 
9V power options: 
 
Outputs 1 – 6; 
An effects pedal that has the option of being powered by a 9V battery requires less 
than 70mA and can be powered by any outputs 1-6 set to 9V.  
Outputs 7– 8p; 
Outputs  7  and  8  are  designed  for  the  higher  current  9V  effects  pedals  and 
switchers out on the market.  
 
 
12V power options:  
 
Outputs: 3-6; 
When switched to 12V outputs 3,4,5,6 are designed to accepted BOSS ACA type 
pedals and some digital...

 
 
Read all Warnings and Cautions before operating your FX Power Source 8 
Power Supply 
1. Keep  these  instructions – The  safety  and  operating  instructions  should  be 
retained for future reference. 
2. All warnings, cautions and instructions should be adhered too for safe operation 
of your FX    Power Source 8 Power Supply. 
3. Follow all operating and use instructions for safe operation of this unit. 
4. WARNING!!! The  lightning  flash  with  arrowhead  symbol  within  an  equilateral...

 
 
-Warnings and Cautions Continued- 
 
 
 
10. CAUTION!!! The  exclamation  with  arrowhead  symbol  within  an  equilateral 
triangle is intended to alert the users to the risk of damage to the FX Power Source 
8 power supply if cautionary instructions are not followed. 
 
11. CAUTION!!! To prevent risk of overheating or damage to the FX Power Source 
8 power supply. Do Not Block any ventilation openings! The ventilation should 
not  be  impeded  by  covering  the  ventilation  openings  with  items...

 
 
Component Description Drawings 
 
 
(1) AC Power Input Jack: 
AC Power Cord supplied. 
 
(2) AC Auxiliary Outlet Connector: 
100 Watt Max @ 220 V 
200 Watt Max @ 110 V 
Several effects pedals on the market are designed to be powered from AC only. 
This where the AC Auxiliary Outlet comes handy. Do not plug your amp in here! 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
5  

 
 
-Component Description Drawings Continued- 
 
 
(3) Output 1: Adjustable Output: 
Adjustable from 9V to 18V 
 
(4) Output 2: Adjustable Output: 
Adjustable from 5V to 9V 
 
(5) Output: 3-6: Switchable Outputs 9V-12V’s 
 
(6) Output: 7-8: High Current 9V outputs. 
 
(7) Output Jacks (“negative center” barrel) 
 
(8) Power good indicators for each output. 
 
6  

 
 
 
 
(9) Voltage Selector Switch  
 
(10) Air Vents 
 
(11) Power supply customer mounting holes  
 
 
 
 
7  

 
 
Dimensional Drawing: 
 
 
 
 
8  

 
 
INPUT: 
 Detachable AC cord 
 150W AC output outlet 
 Input AC voltage select switch 
 
Country Input AC Volt 
North America 120V/60Hz 
Japan 100V/60Hz 
China 220/50Hz 
Europe 230/50Hz 
Australia 240/50Hz 
 
OUTPUTS: 
 All DC Outputs are isolated and regulated 
 Over current protection on each output 
 
Output DC Voltage Current 
1 9V-18V 100mA-50mA 
2 5V-9V 180mA-100mA 
3-6 9.6V/12.4V 100mA/60mA 
7, 8 9V 350mA 
 
DC Cables: 
 
Length Qty. Plug Type 
Output Cable 
27.5” [70cm] 
 
S 
5.5x2.1mm...