Acco Nobo Digital DLP Projector X25C User Manual
Here you can view all the pages of manual Acco Nobo Digital DLP Projector X25C User Manual. The Acco Nobo manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
Problem: No image appears on screen Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section. Ensure the pins of connectors are not crooked or broken. Check if the projection lamp has been securely installed. Please refer to the “Replacing the lamp” section (page 35). Make sure you have removed the lens cap and the projector is switched on. Ensure that the “Hide” feature is not turned on. Problem: Partial, scrolling or...
Page 32
5. Select the “Change” button under the “Monitor” tab . 6. Click on “Show all devices.” Next, select “Standard monitor types” under the SP box; choose the resolution mode you need under the “Models” box. If you are using a Notebook: 1. First, follow the steps above to adjust resolution of the computer. 2. Press the toggle output settings. example:[Fn]+[F4] If you experience difficulty changing resolutions or your monitor freezes, restart all equipment including the...
Page 33
Make sure the projection screen is between the required distance 4.9 to 39.4 feet (1.5 to 12.0 meters) from the projector (refer to page 14). Problem: The image is stretched when displaying 16:9 DVD The projector automatically detects 16:9 DVD and adjusts the aspect ratio by digitizing to full screen with 4:3 default setting. If the image is still stretched, you will also need to adjust the aspect ratio by referring to the following: Please select 4:3 aspect ratio type on your DVD player if you are...
Page 34
Appendices Problem: Message Reminders Fan failed: Over temperature: Replacing the lamp: Password error : Time out: 34 English ... Appendices
Page 35
35 ... English Appendices Replacing the lamp The projector will detect the lamp life itself. It will show you a warning message “ ” When you see this message, change the lamp as soon as pos- sible. Make sure the projector has cooled down for at least 30 minutes before changing the lamp. Warning: Lamp compartment is hot! Allow it to cool down before changing lamp! Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The bulb may shatter and cause...
Page 37
Please note that damage resulting from incorrect installation will invalidate the war- ranty. Ceiling Mount Installation 1. To prevent damaging your projector, please use the ceiling mount package for installation. 2. If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to the projector meet the following specifications: Screw type: M2.6 Maximum screw length: 10mm Minimum screw length: 8mm 37 ... English Appendices