Home > Acco Nobo > Projector > Acco Nobo Digital DLP Projector X25M User Manual

Acco Nobo Digital DLP Projector X25M User Manual

Here you can view all the pages of manual Acco Nobo Digital DLP Projector X25M User Manual. The Acco Nobo manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 21

21
USER CONTROLS
IMAGE-II (VIDEO MODE)
Degamma
This allows you to choose a degamma table that has been finetuned
to bring out the best image quality for the input.
Saturation
Adjusts a video image from black and white to fully saturated colour.
Press the  to decrease the amount of colour in the image.
Press the  to increase the amount of colour in the image.
Tint
Adjusts the color balance of red and green.
Press the  to increase the amount of green in the image.
Press the  to increase the amount of...

Page 22

22
USER CONTROLS
Volume
Press the  to decrease the volume.
Press the  to increase the volume.
Mute
Choose the left icon to turn mute on.
Choose the right icon to turn mute off.
Computer / Video Mode
Language Management Lamp Setting
Image-I Image-II Audio
Volume  
Mute
AUDIO 

Page 23

23 USER CONTROLS
MANAGEMENT
Menu Location
Choose the Menu location on the display screen.
Projection
Front-Desktop The factory default setting.
Rear-Desktop When you select this function, the projector reverses
the image so you can project behind a 
translucent screen.
Front-Ceiling When you select this function, the projector turns the
image upside down for ceiling-mounted projection.
Rear-Ceiling When you select this function, the projector reverses
and turns the image upside down at same time....

Page 24

24 USER CONTROLS
Computer / Video Mode
LAMP SETTING
Lamp Hour
Displays the lamp’s elapsed operating time (in hours).
Lamp Reset
Turns the lamp hour counter to 0 hours.
Lamp Reminding
Choose this function to show or to hide the warning message when
the changing lamp message is displayed. The message will show up
30 hours before end of life.
ECO Mode
Choose “On” to dim the projector lamp which will lower power
consumption and extend the lamp life by up to 130%. Choose ”Off”
to return to normal mode.
Auto...

Page 25

25 APPENDICES
TROUBLESHOOTING
If you experience trouble with the projector, refer to
the following information. If the problem persists, please
contact your local reseller or service centre.
PROBLEM No image appears on the screen
Ensure all the cables and power connections are correctly and
securely connected as described in the “Installation” section.
Ensure the pins of connectors are not crooked or broken.
Check if the projection lamp has been securely installed. 
Please refer to the “Replacing the...

Page 26

26 APPENDICES
PROBLEM: The screen of the Notebook or PowerBook
computeris not displaying your presentation.
If you are using a Notebook PC:
Some Notebook PCs may deactivate their screens when a second
display device is in use. Refer to your computer’s documentation
for information on how to reactivate the monitor display.

If you are using an Apple PowerBook:
In Control Panels, open the PowerBook Display to 
select Video Mirroring “On”.
PROBLEM Image is unstable or flickering
Use “Tracking” to correct...

Page 27

27 APPENDICES
PROBLEM LED lighting message
Message 
Power LED Green Temp LED Lamp LED
Standby State
Flashing Off Off
(Input power cord)
Lamp lightingOn Off Off
Power onOn Off Off
Power off (Cooling)On Off Off
Error (Lamp fail)Off Off  On
Error (Thermal fail) On On  Off
Error (Fan lock fail) Off                      Flashing  Off
Error (Over Temp.) Off On  Off
Error
Off Off  On
(Lamp Breakdown)
PROBLEM Message Reminders
“Lamp is approaching the end of its useful life in full power
operation. Replacement...

Page 28

The projector will detect the lamp life itself. It will show you a
warning message “Lamp is approaching the end of its useful life
in full power operation. Replacement Suggested!” When you see
this message, change the lamp as soon as possible.
Make sure the projector has been cooled down for at least 
30 minutes before changing the lamp.
Lamp Changing Procedure:
1Turn off the power to the projector by pressing the Power button.
2Allow the projector to cool down at least 30 minutes.
3Disconnect the power...

Page 29

29 APPENDICES
SPECIFICATIONS
Light Valve
Lamp
Number of Pixels
Displayable Color
Projection Lens
Projection Screen Size (Diag.)
Projection Distance
Video Compatibility
H. Frequency
V. Frequency
Power Supply
I/O Connectors
Dimensions (W x H x D)
Environmental
Safety RegulationSingle Chip DLPTMTechnology by Texas Instruments
200W SHP User Replaceable Lamp
1024 pixels(H) X 768 lines(V)
16.7M colors
F/2.4~2.65. f 28-35.6mm
0.63 to 6.25 meters diagonal
1.2 to10 metres
PAL, SECAM 625/576i\p NTSC 525/480i\p HD...

Page 30

30 APPENDICES
COMPATIBILITY MODESRemark!
“*” compression
computer image
VESA VGA 640 x 350 70 31.5 70 31.5
VESA VGA 640 x 350 85 37.9 85 37.9
VESA VGA 640 x 400 85 37.9 -- --
VESA VGA 640 x 480 60 31.5 60 31.5
VESA VGA 640 x 480 72 37.9 72 37.9
VESA VGA 640 x 480 75 37.5 75 37.5
VESA VGA 640 x 480 85 43.3 85 43.3
VESA VGA 720 x 400 70 31.5 70 31.5
VESA VGA 720 x 400 85 37.9 85 37.9
SVGA 800 x 600 56 35.2 56 35.2
SVGA 800 x 600 60 37.9 60 37.9
SVGA 800 x 600 72 48.1 72 48.1
SVGA 800 x 600 75 46.9 75 46.9...
Start reading Acco Nobo Digital DLP Projector X25M User Manual

Related Manuals for Acco Nobo Digital DLP Projector X25M User Manual

All Acco Nobo manuals