Home > Accusplit > Stopwatch > Accusplit Stopwatch AE790M500DEC User Manual

Accusplit Stopwatch AE790M500DEC User Manual

Here you can view all the pages of manual Accusplit Stopwatch AE790M500DEC User Manual. The Accusplit manuals for Stopwatch are available online for free. You can easily download all the documents as PDF.

Page 1

INSTRUCTION MANUAL DIGITAL QUARTZ STOPWATCH
AE602M100 AE760M100
AE790M500 AE790M500DEC
®   

Page 2

IMPORTANT NOTE FOR MODEL 760M & 790M
This stopwatch can store up to 100 or 500 split/lap times depending on the model. However please note when
there are 5 free memories left, the icon “FULL” will blink to remind you of the nearly full situation. Whenever
the storage is full, extra split/lap times will NOT be stored into memory even though you reset your stopwatch
and start a new event. Extra split/lap times will only be shown on the display but not recorded.
In order for the stopwatch to record the...

Page 3

Instructions
IntroductionYou are about to enjoy an advanced Cumulative and Lap memory professional digital quartz stopwatch with
advanced timing features.
Model AE602M100, AE760M100, AE790M500 & AE790M500DEC Stopwatch includes Time of day, Daily
Alarm, Chronograph stopwatch, 100 or 500 memory, Data register (Model 760M & 790M only), Countdown
timer, Stroke Measurement timer, Pacer from 5 to 240 beats per minute.
Model AE790M500DEC Decimal Stopwatch includes Decimal stopwatch (1/100 of a sec, 1/1000 of a...

Page 4

As you choose each mode, a message will be displayed for a second before you enter the mode:
Normal Time  mode
(All models)
Alarm Time  mode
(All models)
Chronograph mode
(All models)
Lap Time Recall mode
(All models)
Data mode
(760M & 790M models only)
The operation of the stopwatch is divided into eight modes (as noted above):
1. Normal time mode
2. Alarm time mode
3. Chronograph and Recall mode
4. Data mode (760M & 790M Models only)
5.    Count-down timer mode
6.    Pacer mode
7.    Stroke measurement...

Page 5

This is only a brief description of these buttons. Detailed uses of the buttons are different in particular functions
and will be described later in the instructions.
Pressing [MODE] button will toggle among the modes above. Note that there is no auto-return function in the
stopwatch.  Whenever you change modes, the stopwatch will remain in that mode until the [MODE] button is
pressed again
Each time you enter a mode, a message will be displayed for a second before you enter the mode:
Note:-  In the...

Page 6

or date-month (d-m), Sound ON or OFF, Contrast (darkness of the digits - default is 9), then back to Second,
and recycles again.  Note: when the second is to be set, press [START] to reset the second digits to zero.
At the end of setting, press [RECALL] or [MODE] to exit from the setting mode and back to Normal Time
Display.
Display for Sound ON or OFF setting :-
(Let the current status be ON.)
Press [START] to toggle Sound ON or OFF.
Display for contrast adjustment:-
(Let the current contrast be 5)...

Page 7

Alarm Time  ModePress [MODE] until you enter Alarm mode.  This mode is used for displaying the daily alarm time and allows
you to enable or disable the alarm.
When you enter the Alarm Time mode, the display shows the alarm time on the upper line while the date is
shown in the middle of the display and the normal time is on the lower line.
To toggle the alarm ON or OFF, press [RESET].  When alarm is ON, the indicator (((o))) will be ON while it
will be turned off when alarm is disabled.  When alarm time...

Page 8

Whenever the stopwatch stops running, the STOP indicator will be ON.  Press the button [START/STOP] to
start the stopwatch.  As it runs, the current elapsed time is shown on the lower line.
To view the current split / lap time, you can press [LAP/SPLIT].
The number of split/lap times is shown on the upper left corner. The corresponding split and lap times are
displayed on the upper and middle line.   Press [LAP/SPLIT] again, the next split/lap time will be shown and
the number of split/lap time is...

Page 9

To stop the chronograph, press [STOP].  The indicator STOP will come on again to show the status.  Press
[RESET] as the stopwatch stops to reset the stopwatch while the split/lap times will be kept in memory. When
the stopwatch starts running from reset state, all the lap memories will be cleared.
Decimal Timing (AE790M500DEC model only)
1. The DM Model can operate as a normal 1/100 second chronograph as well as decimal minute, decimal
second, and decimal hour chronograph.
As you press [MODE] to enter...

Page 10

Please note that if the stopwatch has started running (or is running),  no selection for chronograph
operating modes can be made until the stopwatch has been stopped and reset.
Segmented run memory for lap/split time storage:-
A header consisting of the date/time stamp is attached to each segment to indicate the moment when you
began recording the particular timing segment. To get to this feature, press [MODE] in chronograph mode to
enter DATA mode when the stopwatch has been stopped.  Records for...
Start reading Accusplit Stopwatch AE790M500DEC User Manual

Related Manuals for Accusplit Stopwatch AE790M500DEC User Manual

All Accusplit manuals