Accusplit Stopwatch AE920HRM User Manual

9.1 Setting the Daily Alarm Mode 
 
 To Set the Daily Alarm Mode 
 
To set the Daily Alarm Mode: press and hold the [mode] button to select the setting display 
(the hour digits will start flashing). 
 
The Setting Sequence 
•  When the hour digits start to flash, press the [mode] button to select between hour and 
minute setting, or press the [start/stop] or [reset] button to scroll through the setting (hold the 
button down to scroll the setting at a faster pace). 
 
•  When the minute  digit flashes...

10.0 Chronograph Mode 
 
 Chronograph Mode 
Chronograph Mode measures 2 different periods of time: 
1) Elapsed time 
2)  Cumulative elapsed time 
 
Chronograph Display 
•  The display shows the Zero display, if the watch or the chronograph has been reset. 
•  The Chronograph Mode Indicator  CHR exhibits on the upper row of the display. 
•  The  chronograph time (hours, minutes, seconds and 1/100 second) exhibits on the lower row 
of the display. 
•  The maximum counting range of the chronogr aph is 99...

10.1 Using the Chronograph Mode 
 
 To Use the Chronograph Mode 
 
•  In Zero Display, press the [start/stop] button  once to start the counting.  When it is counting, 
press the [start/stop] button once again to stop  the counting, and the elapsed time of which 
the chronograph is counting will appear. 
•   When the elapsed time is displaying, repeat  the above mentioned key operations to get the 
accumulative elapsed time or press the [reset] button to reset the chronograph (ready for a 
new...

11.0 Timer Mode 
 
  
Timer Mode 
•  This Watch has a countdown timer to keep tra ck of a faxed period of time (target time) 
entered by the user. 
 
The Target Time 
•   The user can set a target time of  up to 99 hours, 59 minutes 59 seconds. 
 
Timer Display 
•  The Timer Mode Indicator  TMR exhibits on the upper row of the display. 
•  The target time (hours, minutes and seconds) exhibits on the lower row of the display. 
ACCUSPLIT  EAGLE 920HRM Instructions     14 of 18  

11.1 Setting the Timer Mode 
 
  
To Set the Timer Mode 
 
•  To set the target time in timer mode, press  and hold the [mode] button for about 2 seconds 
(the hour  digits will start flashing) 
 
The Setting Sequence 
 
•  When the  hour digits start to flash, press the [mode] button to move the flash following the 
sequence of the adjacent diagram, or press the [start/stop] or [reset] button to scroll through 
the setting (hold the button down to scroll the setting at a faster). 
 
•   When one of the...

11.2 Using the Timer Mode 
 
  
To Use the Timer Mode 
•  Once a target time has been set (for exampl e 30 minutes), press the [start/stop] button once 
to start the countdown. The countdown time will be displayed continuously throughout the 
countdown. 
•   To stop countdown, press the [start/stop] button once. 
 
To Reset the Timer 
•  To reset the timer to the preset target time  before the countdown reaches zero, press  the 
[reset] button once (when the timer has stopped counting). 
•   To start...

12.0 Specifications 
 
Current Time Mode 
•  Hour, minute and second 
•  Month, day, day of week and year  
•  12 / 24 hour format selectable  
• Month-day/Day-m onth selectable 
•  Auto calendar from year 2000 to 2099  
•  Hourly Chime on the hours 
 
Hearth Rate Alert Mode  
•  Measuring range: 43 to 200 beats per minute  
•  1 Heart Rate Alert (upper and lower limit) 
 
Daily Alarm Mode  
•  Daily Alarm: 1 daily alarm 
•  Alarm Duration: about 30 seconds  
 
Chronograph Mode 
•  Resolution: 1/100...

13 .0P ote n tia l C au se s  f o r: N O  Hea rt Ra te  Re adi ng  o r     
  Long Re spo nse  T im e 
1)  Caus e: Dry Skin. 
Solution:  App ly condu ctive gel or saliva  thoro ughly  to  fingers  an d wrist  area. (Eve n water  will 
help  if  con ductive  gel is no t available). 
2)  Caus e: Fing ers are not placed  firmly  ov er  the  sensors. 
Solution:  Make  sure fingers (not  the tips)  lay flat  and  firmly  over the senso rs  and  watch  is 
placed  securely  on  wrist.  Do  not  use  the  very...