Acer Aspire 1520 Service Guide

							Chapter 492
7.Then insert the System CD to the optical drive.
8.You will see the screen displaying “PASS” when the system has buit NAPP Master hard disc drive. 
						

							93Chapter 4
Disk to Disk Recovery
1.Prepare NAPP CD, Recovery CD and System CD.
2.Put NAPP CD into the optical drive. Then boot up the system.
3.The system will ask you if you want to build NAPP Master HDD. Please press any key to continue.
4.NAPP CD will start to preload the system, please click [Y]. 
						

							Chapter 494
5.Select Disk to Disk Recovery. Then choose Single Language or Multi-Languages Recovery.
NOTE: For Multi-Languages Recovery, not more than five languages could be loaded to the system.
6.Put the Recovery CD to the optical drive. This step is to create image files to the system, you do not have 
to put the Recovery CD to the optical drive in order. Place one Recovery CD to the drive at one time till 
you finish all Recovery CDs. 
						

							95Chapter 4
After you place the Recovery CD to the optical drive, you will see the display below.
7.Then insert the System CD to the optical drive. 
						

							Chapter 496
8.You will see the screen displaying “PASS” when the system has buit NAPP Master hard disc drive. 
						

							97Chapter 4 
						

							Chapter 598
To p  V i e w
1 LIN1 Line-in Port 15 U11 CPU Socket
2 LOUT Line-out Port 16 U16 North Bridge
3 JK1 RJ45+RJ11 17 FAN1 Fan Connector
4 INV1 LCD  Inverter Cable Connector 18 Note: There is no 18 on this main board. 
5 CN1 USB Port 19 TPAD1 Touchpad Cable Connector
6 CN2 USB Port 20 HDD1 HDD Connector
7 CN3 USB Port 21 KB1 Keyboard Connector
8 CN4 USB Port 22 SPK1 Speaker Cable Connector
9 CRT1 VGA Port 23 IDE1 Optical Drive Connector
10 TV1 S-Video Port 24 U26 South Bridge
11 LCD1 LCD Coaxial Cable Connector 25 CN9 RTC Battery Connector
12 PRT1 Parallel Port 26 CN8 Launch Board Cable Connector
13 DCIN1 DC-in Port 27 SW1 (Please see Chapter 5 for its settings)
14 CN6 LCD Lid Switch 28 SKT1 PCMCIA Slot
Jumper and Connector Locations
Chapter  5 
						

							99Chapter 5
Bottom View
1 CN11 Wireless LAN Card Connector  5 U93 FIR Port
2 CN12 Modem Board Connector 6 DM1 DIMM Socket 1
3 CN10 Modem Cable Connector 7 DM2 DIMM Socket 2
4 SKT2 IEEE 1394 Port 8 BAT1 DC Charger Board Connector 
SW Settings
SW1-8SW2-7SW3-6
Chkpw
EnableON X
Bootblock 
EnableXON 
						

							Chapter 6100
This chapter gives you the FRU (Field Replaceable Unit) listing in global configurations of Aspire 1360/1520. 
Refer to this chapter whenever ordering for parts to repair or for RMA (Return Merchandise Authorization).
Please note that WHEN ORDERING FRU PARTS, you should check the most up-to-date information available 
on your regional web or channel. For whatever reasons a part number change is made, it will not be noted on 
the printed Service Guide.  For ACER AUTHORIZED SERVICE PROVIDERS, your Acer office may have a 
DIFFERENT part number code from those given in the FRU list of this printed Service Guide. You MUST use 
the local FRU list provided by your regional Acer office to order FRU parts for repair and service of customer 
machines.
NOTE: To scrap or to return the defective parts, you should follow the local government ordinance or 
regulations on how to dispose it properly, or follow the rules set by your regional Acer office on how to 
return it.
FRU (Field Replaceable Unit) List
Chapter 6 
						

							101Chapter 6
Aspire 1360/1520 Exploded Diagram