Acer Aspire 1810t Service Guide

Chapter 391
3.Ensure the cable is properly laid through the hinge. Apply adhesive on the locations shown.
4.Relay the cables around the module edge for the right antenna. 

92Chapter 3
5.Relay the cables around the edge for the left antenna.
6.Flatten the two foil tabs ensuring the screw holes are properly aligned. 

Chapter 393
Replacing the FPC Cable
1.Connect the FPC cable connector.
 
2.Place the protective clear adhesive tape down firmly over the connector.
3.Apply adhesive behind the cable and stick the FPC cable down on the rear of the panel. 

94Chapter 3
Replacing the LCD Brackets
1.Replace the four screws holding the LCD brackets in place.
Screw List
StepScrewQuantityScrew Type
LCD Brackets 
DisassemblyM2*2.5 4 

Chapter 395
Replacing the LCD Panel
1.Place the LCD panel into LCD module as shown top edge first, making sure the cable is not trapped 
behind the panel.
2.Replace the two screws while ensuring the cables pass through the hinges correctly.
Screw List
StepScrewQuantityScrew Type
LCD Panel Assembly 2x3 2 

96Chapter 3
3.Apply adhesive and stick the microphone down. 

Chapter 397
Replacing the Camera Board
1. Apply adhesive and lay the Camera Board board down pressing firmly.
2.Connect the cable to the Camera Board. 

98Chapter 3
Replacing the LCD Bezel
1.Place the bezel hinge covers over the hinges. 
2.Ensure the cables are correctly exiting the hinges. 

Chapter 399
3.Press down around the bezel starting from the bottom and working simultaneously around the edges to 
the top. 

100Chapter 3
4.Replace the six screws.
Screw List
5.Replace the six rubber screw covers.
StepScrewQuantityScrew Type
LCD Bezel Assembly M2*5 4