Acer Aspire 3810tg Service Guide

Chapter 343
Disassembly Procedure Flowchard
The flowchart on the succeeding page gives you a graphic representation on the entire disassembly sequence 
and instructs you on the components that need to be removed during servicing. For example, if you want to 
remove the system board, you must first remove the keyboard, then disassemble the inside assembly frame in 
that order.
Main unit disassembly flow chart
LCM module disassembly flow chart
Start
Battery
HDDBTCBMemoryThermal
module
UPPER
CASE LCM
module...

44Chapter 3
Removing the Battery Pack
1.Release the battery.
2.Slide the battery latch then remove the battery.
NOTE: Battery has been highlighted with the yellow circle as above image shows. Please detach the battery 
and follow local regulations for disposal. 

Chapter 345
Removing the HDD and RAM
3.Remove three screws on the HDD cover and remove HDD. 
4.Remove the screw on RAM cover and remove Both of RAM.
Removing the Battery
5.Remove RTC battery.
NOTE: RTC battery has been highlighted with the yellow circle as above image shows. Please detach the 
RTC battery and follow local regulations for disposal.
Ty p e N u m b e r
M2*5(4.5D*0.8T) 4 

46Chapter 3
Remove keyboard
6.Disconnect five latches on the keyboard. 
7.Remove the FFC behind the keyboard.
8.Remove Touch Pad FFC and lamp FFC.
Remove FFC of main board
9.Use tweezers to remove the rubber foot on the back of the notebook. There are five rubber foots. 

Chapter 347
10.Remove all of the screws on the back of the notebook.
11 .Remove screw on the upper case.
Ty p e N u m b e r
M2*5(4.5D*0.8T) 15(Red)
M2*4(4.5D*0.5T) 2(Yellow)
Ty p e N u m b e r
M2*5(4.5D*0.8T) 7 

48Chapter 3
12.Remove the dummy card.
13.Remove upper case and disconnect the connection between the audio board and upper case.
14.Disconnect all of the FFC on the main board.
15.Remove the FFC of the panel and audio board. 

Chapter 349
16.Remove the FFC of Bluetooth and SSD board.
17.Remove the connector of camera and the FFC of card reader board.
Remove wireless card and thermal module
18.Release wireless screw and Line and remove wireless card.
Ty p e N u m b e r
M2*5*3 2 

50Chapter 3
19.Release the screw of fan and take off it.
20.Loose four screws and remove it.
Ty p e N u m b e r
M2*4(4.5D*0.5T) 2
Ty p e N u m b e r
M2*4(4.5D*0.5T) 4 

Chapter 351
Remove Main board
21.Remove connection CRT board and USB board.
22.Loose two screw on the main board.
Ty p e N u m b e r
M2*4(4.5D*0.5T) 2 

52Chapter 3
23.Remove DC in connector and remove the whole main board.
24.Remove four screws on the thermal pipe and remove it.
Ty p e N u m b e r
M2*3 4