Acer Aspire 5110 5100 3100 TravelMate 5510 5210 Extens 5410 5010 User Manual

42Chapter 2
Information
•CPU type: This item will show t he CPU information of the system.
• CPU speed: This item will show the COU clock speed.
• HDD model name: The hard disk model name is automa tically detected by the system. If there is no 
hard disk present or unknown type, “None” should be shown on this field.
• HDD serial number: If no hard disk or other devices are installed on primary IDE master, it will display a 
blank line.
• System BIOS version: This field  reports BIOS version of the...

Chapter 243
Main
•System Time and System Date: The hours are di splayed with 24-hour format. The changes in these 
two items take effect immediately.
• System Memory: This item reports the memory size  of system base memory. The size is fixed to 
640KB.
• Extended Memory: It reports the memory size of  the extended memory in the system. The extended 
memory size is equal to to tal memory size (one MB).
• Video Memory: It indicate s the video memory size.
• Quiet Boot:
•Enabled: Customer Logo is...

44Chapter 2
•F12 Boot Menu:
•Enabled: When it is enabled, the users can modify  device boot priority by pressing  during 
POST.
• Disabled: When it is not enabled, device boot priority will not be adjustable during POST.
The boot device change is only for one-time  change. In other words, when the system is 
rebooted, the boot devi ce sequence will be the same as th e one defined in the BIOS setup 
(Boot option).
• D2D Recovery: It allows the users to en able or disable the disk-to-disk recovery. 

Chapter 245
Advanced
•Enable ACPI (debug only): Enable/Disable ACPI (A dvanced Configuration and Power Interface) debug 
only, remove this option for production.
• Infrared Port:
•Disabled: No configuration
• Enabled: User configuration
• BIOS or OS chooses configuration
PhoenixBIOS Setup Utility 
          Info.  
      Main         Advanced      Security       Boot       Exit  
 
   
Item Specific Help  
   
 
   
  
    Infrared Port (FIR)
    Advanced Chipset Control...

46Chapter 2
Security
The system supports three levels of password protection. The password support consists of a 
Supervisor Password, User Pass word, and Hard Disk Password. A ll the passwords are stored in a 
non-volatile storag e device (EEPROM).
•Password Policy:
All the passwords will obey the following rules:
•All the passwords can be set or cleared in BIOS Setup Security screen.
• The password entry consists of eight alphanumeric  characters. At least one character must be 
assigned.
• The valid...

Chapter 247
•The users can not change or remove password during resuming from S4.
• The max. number of times to retry the password is limited to three.
• Supervisor Password:
Supervisor Password co ntrols the access of the whole B IOS Setup Utility. If the Supervisor 
Password is set, the system will pop up the passwo rd dialog box to ask for the password when 
the users press  for  entering BIOS Setup Utility.
If the Supervisor Password is set and Password  on boot is enabled, the system will pop up...

48Chapter 2
Boot
This menu allows the users to decide the order of bootable devices to load the operating system. It 
identifies all the bootable devices in the system a nd attempts to boot them in the order specified. 
Bootable devices include the diskette drive in  module bay, the hard disk and the CD-ROM/DVD 
drive in module bay and onboard LAN device.
PhoenixBIOS Setup Utility 
           Info.        Main       Advanced       Security        Exit  
 
  
Item Specific Help 
  
Boot priority order:...

Chapter 249
Exit
•Exit Saving Changes: It allows the users to  save changes to CMOS and reboot the system. 
• Exit Discarding Changes: The users can  exit the Setup not to save changes.
• Load Setup Defaults: It allows the users to load default values in CMOS Setup.
• Discard Changes: The users can discard previous changes in CMOS Setup.
• Save Changes: The users can save current changes in CMOS Setup.
PhoenixBIOS Setup Utility 
  Info.  Main       Advanced       Security        Boot
 
   
Item Specific...

50Chapter 2
DOS Flash SOP
1.Press   to enter Setup Menu, select Boot page to change boot device priority order. Use USB as an 
example.
2. Execute the  BIOS.BAT or FLASH.BAT  batch file to update BIOS. 

Chapter 251
3.In flash BIOS, the caution message  Please do not remove AC power source  will show. If AC power 
source is plugged, the caution message  AC adapter does not exist.