Acer At2055 At2056 At2355 At2356 User Guide

							
English
2
Advanced features
Advanced Picture Adjustment
MENU
OK
Advanced Picture Adjustment
1MENUPress the Menu key from the remote control hand set, to invoke the OSD (On Screen Display).
2OK
Using the directional keys to navigate, 
select  Advance from the OSD. Scroll to ‘Advanced Picture Adjust’ sub-menu to adjust picture settings.
3OK
Using the directional 
keys, to navigate through ‘Noise Reduction’, ‘Back Light Control’, ‘ACM’ or ‘Viewing Distance’.
 
						

							
English
22

4
* Noise Reduction: This function filters noise from a signal. You can set to Off, Low, Medium, High or Auto depending on your preference.
* 
Back Light Control: This setting adjusts the picture displays ‘backlight / brightness’. Use the Left or Right direction keys to adjust this feature.
* 
ACM: This function (Adaptive Contrast Management) automatically adjusts picture contrast, depending on the brightness of the video content. You can turn this feature either to ‘on’ or ‘off’.
* 
Viewing Distance: Use the Left or Right direction keys to set the distance between you and the screen. This will affect how NICE 
mode (see page 9) adjusts the picture settings.
5MENUPress MENU to exit.
 
						

							
English
23

Steady Sound
1MENUPress the Menu key from the remote control hand set, to invoke the OSD (On Screen Display).
2OK
Using the directional keys, navigate to and select 
 Sound from the OSD. Navigate to ‘Steady Sound’ to adjust settings.
3This function prevents sudden changes in the audio output level. If this function is selected as 'On,' volume levels will be consistent when switching between input sources and changing channels.  
4MENUPress MENU to exit.
Steady Sound
MENU
OK
 
						

							
English
24

Channel Edit
Channel Edit
1MENUPress the Menu key from the remote control hand set, to invoke the OSD (On Screen Display).
2OK
Using the directional keys, 
navigate to and select Channel Management. From this sub menu, select Channel Edit to adjust Channel settings.
3OK
Using the directional keys, to navigate through options ‘Edit’, ‘Skip’, ‘Reorder’ or 
‘Decoder’.
MENU
OK
 
						

							
English
25

You can toggle number keys to enter alpha-numeric characters as follows:\
Number : , - Number 6: 6, m, n, o, M, N, O
Number 2: 2, a, b, c, A, B, C  Number 7: 7, p, q, r, s, P, Q, R, S
Number 3: 3, d, e, f, D, E, F  Number 8: 8, t, u, v, T, U, V
Number 4: 4, g, h, i, G, H, I  Number 9: 9, w, x, y, z, W, X, Y, Z
Number 5: 5, j, k, l, J, K, L  Number 0: 0, (space)
4MENU
OK
* Edit: You can set the Channel Index and Channel Name here. Use the directional keys to edit the channel index or channel name column. You can use the number keys to enter a number or alphabetic character (by toggling number keys)* and press OK to confirm or Menu to cancel.
*  Skip: 
Please use the directional keys to select which channels you want to skip and press OK to confirm. These channels will automatically be skipped when the CH key is used to select channels later on. However, you can still manually select these channels.
*  Reorder: 
Please use the directional keys to select which channels you want to reorder and swap. These two channels will change order in the channel list.
*  Decoder: 
Use the directional keys to turn decoding of encrypted channels on or off (only works if a decoder is connected to the SCART port).
5MENUPress MENU to exit.
 
						

							
English
26

Reorder for channels
The first time you completed the setup wizard, all available channels \
were listed. If you need to reorder for new channels, please follow the steps below:
Reordering for channels
1MENUPress the MENU key on the remote control to bring up the OSD.
2OKUse the directional keys to navigate and select Channel Management. Then select Channel Edit.
3
MENU
OK
Highlight Reorder. Then, select the channel you wish to reorder and press OK to confirm. Move to the right channel number and press OK to reconfirm.
4MENUPress MENU to exit.
MENU
OK
 
						

							
English
27

Scanning for channels
1MENUPress the MENU key on the remote control to bring up the OSD.
2Use the directional keys to navigate and select Channel Management.
3OKHighlight Auto Scan. Then, select Start and press OK to begin.
4
Auto scan for channels
The first time you completed the setup wizard, all available channels \
were listed. If you need to re-scan for new channels, please follow the steps below:
MENU
OK
Reordering for channels
1MENUPress the MENU key on the remote control to bring up the OSD.
2OKUse the directional keys to navigate and select Channel Management. Then select Channel Edit.
3
MENU
OK
Highlight Reorder. Then, select the channel you wish to reorder and press OK to confirm. Move to the right channel number and press OK to reconfirm.
4MENUPress MENU to exit.
 
						

							
English
28

5MENUPress MENU to exit.
Channel scan ordering
. If your Country supports ‘LCN’ (logical channel numbers)*, via D\
igital Channel broadcasting, these channels will always have the highest priority.
2.  If your Country does not support DTV LCN, scanned channel numbers will s\
tart from 
ch80 in frequency of order.
3.  ATV channels will start from ch90, and follow the current ATV channel sorting rules. 
If the highest DTV number is larger than 90, ATV channels will be sorted starting 
from chX0 (X=0, …) depending on the LCN channel's digit count.
4.  If there is any LCN conflict, either between ATV LCN and DTV LCN, the \
conflicting 
channel will be stored in a channel location after ch800.
5.  The TV will automatically detect new channels, and if a new channel is detected it will 
place the LCN channel in its LCN position. If there's no LCN, or the cha\
nnel position has already been occupied, the channel will be located at the end of the\
 non-LCN channel list.
6.  If there is no digital service after auto-scan, the analog channel may b\
e located from 
ch00. Referring to rule 3, the X in this case will be 0.
In some European countries, the TV broadcast will embed the LCN (logica\
l channel number) in the DTV signal to allocate a channel number.
 
						

							
English
29

Intelligent Zapping
Intelligent Zapping changes the action of the Recall button when channel-surfing. When you click through channels and then press the Recall key, it will return to the last channel viewed for longer than the set time, ignoring other channels.
Intelligent Zapping
1MENUPress the MENU key on the remote control to bring up the OSD.
2OKUse the directional keys to navigate and select Channel Management. 
3OK
Select Intelligent Zapping and then use the directional keys to set the time.
4MENUPress MENU to exit.
MENU
OK
 
						

							
English
30

Blue Mute
1MENUPress the Menu key from the remote control hand set, to invoke the OSD (On Screen Display).
2OK
Using the directional keys, navigate to and 
select Advance from the OSD. Navigate to Blue Mute to adjust this setting.
3
If Blue Mute is selected as being ‘On’, a blue screen will be displayed if the TV is unable to detect a signal. If Blue Mute Off is selected, a black screen will be displayed when no signal is detected.
4MENUPress MENU to exit.
Blue Mute
MENU
OK