Acer At2703 Users Guide

							
English
31

Unit: mm
P USHP OWER
853.94
48.65399.92
100
123.25
207.76
100
100
463.58527.09
577.60
247.29
325.60
AT2602/AT2604

7in1_User Guide_EU.indb   312006/1/24   ¤U¤È 05:31:10 
						

							
English
32

Appendix-Source Options
PIP/PBP
POP 
: SupportedX: Not supported
              Main
  Sub
TVSCART1 SCART2 AV
3
VGA
TV XXXX
SCART1 XXXX
SCART2 XXXX
 AV3XXXX
VGAX
              Main
  Sub
TVSCART1 SCART2 AV
3
VGA
TV XXXX
SCART1 XXXXX
SCART2 XXXXX
 AV3XXXXX
VGAXXXXX

7in1_User Guide_EU.indb   322006/1/24   ¤U¤È 05:31:11 
						

							
English
33

Troubleshooting
Before you call the Acer service center, please check the following items:
Here is a list of possible situations that may arise during the use of your LCD TV. Easy answers and solutions are provided for each.
There is no picture or sound.
•  Make sure the power cord is properly inserted in the power outlet.
•  Make sure the input mode is correctly set by your selected input.
•  Make sure the antenna at the rear of the TV is properly connected.
•  Make sure the main power switch is turned on.
•  Make sure the volume is not set to minimum or the sound is not set to mute.
•  Make sure the headphones are not connected.
•  Reception other than those of broadcasting stations can be considered.
Picture is not clear.
•  Make sure the antenna cable is properly connected.
•  Consider whether your TV signal is being properly received.
•  Poor picture quality can occur due to a VHS camera, camcorder, or other peripheral being connected at the same time. Switch 
off one of the other peripherals.
•  The 'ghost' or double image may be caused by obstruction to the antenna due to high-rise buildings or hills. Using a highly 
directional antenna may improve the picture quality.
•  The horizontal dotted lines shown on the pictures may be caused by electrical interference, e.g., hair dryer, nearby neon 
lights, etc. Turn off or remove these.
Picture is too dark, too light or tinted.
•  Check the color adjustment.
•  Check the brightness setting.
•  Check the sharpness function.
•  The fluorescent lamp may have reached the end of its service life.
Remote control does not work.
•  Check the batteries of the remote control.
•  Make sure the remote sensor window is not under strong fluorescent lighting.
•  Try to clean the remote control sensor lens on the TV with a soft cloth.
•  Use the buttons (hotkeys) on the TV before the remote control works.
If the above suggestions do not solve your technical issue, please refer to the warranty card for service information.

7in1_User Guide_EU.indb   332006/1/24   ¤U¤È 05:31:12 
						

							
English
34

Product specifications
ModelAT3704AT3202/AT3204
Panel spec
Resolution (pixels)1366 x 7681366 x 768
Brightness (tpe.)500 nits500 nits
Contrast Ratio (tpe.)800:1800:1
Display color16.7 M16.7 M
Viewing angle (tpe.)H: 176o ; V:1760H: 170o ; V:1700
Response (tpe.)9ms (gray to gray)16ms (gray to gray)
Power supply
Input100V~240V -AC. (47 ~ 63 HZ)90V~264V -AC. (47 ~ 63 HZ)
Max. power consumption235 W180 W
Power saving5W5W
Mechanical
Dimensions (W x H x D mm)1141 x 687 x 284980 x 600 x 252
Weight (Kg)2019.5
Weight (lbs)4343
Gross Weight (Kg)22.522.5
Gross Weight (lbs)49.649.6
Wall Mounting (mm)400 x 200400 x 200
Analog TV system
TV Color systemPAL, SECAMPAL, SECAM
Sound systemB/G/D/K/I/L (multi-European)B/G/D/K/I/L (multi-European)
Stereo systemNICAM/A2NICAM/A2
TV Tuner SystemPLL, 45.25Mhz-862.25MhzPLL, 45.25Mhz-862.25Mhz
SubtitlesTeletext 1.5Teletext 1.5
Analog TV-tuner quantity11
Terminal
Analog Tuner InYesYes
SCART1CVBS (In/Out), RGB(In), AudioR/LCVBS (In/Out), RGB(In), AudioR/L
SCART2CVBS (In/Out), RGB(In), AudioR/LCVBS (In/Out), RGB(In), AudioR/L
AV3 inYPbPr, YCbCr, CVBS, AudioR/LYPbPr, YCbCr, CVBS, AudioR/L
DVI in*Yes*Yes*
HDMI in**Yes**Yes**
PC D-sub inYesYes
PC audio-in YesYes
Audio system
Speaker15 W + 15 W10 W + 10 W
*  DVI only for AT2604/AT2703/AT2704/AT3204/AT3704
** HDMI only for AT2604/AT2704/AT3204/AT3704

7in1_User Guide_EU.indb   342006/1/24   ¤U¤È 05:31:12 
						

							
English
35

ModelAT2703/AT2704AT2602/AT2604
Panel spec
Resolution (pixels)1366 x 7681366 x 768
Brightness (tpe.)500 nits500 nits
Contrast Ratio (tpe.)1000:1600:1
Display color16.7 M16.7M
Viewing angle (tpe.)H: 176o ; V:1760H:170o ; V:170o
Response (tpe.)8ms (gray to gray)16ms (gray to gray)
Power supply
Input90V~264V -AC. (47 ~ 63 HZ)90V~264V -AC. (47~63 HZ)
Max. power consumption150 W150W
Power saving5W5W
Mechanical
Dimensions (W x H x D mm)854 x 527 x 207854 x 527 x 207
Weight (Kg)15.515.5
Weight (lbs)34.234.2
Gross Weight (Kg)16.516.5
Gross Weight (lbs)36.436.4
Wall Mounting (mm)200 x 100200 x 100
Analog TV system
TV Color systemPAL, SECAMPAL, SECAM
Sound systemB/G/D/K/I/L (multi-European)B/G/D/K/I/L (multi-European)
Stereo systemNICAM/A2NICAM/A2
TV Tuner SystemPLL, 45.25Mhz-862.25MhzPLL, 45.25Mhz-862.25Mhz
SubtitlesTeletext 1.5Teletext 1.5
Analog TV-tuner quantity11
Terminal
Analog Tuner InYesYes
SCART1CVBS (In/Out), RGB(In), AudioR/LCVBS (In/Out), RGB(In), AudioR/L
SCART2CVBS (In/Out), RGB(In), AudioR/LCVBS (In/Out), RGB(In), AudioR/L
AV3 inYPbPr, YCbCr, CVBS, AudioR/LYPbPr, YCbCr, CVBS, AudioR/L
DVI in*Yes*Yes*
HDMI in**Yes**Yes**
PC D-sub inYesYes
PC audio-in YesYes
Audio system
Speaker5 W + 5 W5 W + 5 W
*  DVI only for AT2604/AT2703/AT2704/AT3204/AT3704
** HDMI only for AT2604/AT2704/AT3204/AT3704

7in1_User Guide_EU.indb   352006/1/24   ¤U¤È 05:31:12