Acer H9500 Users Guide

1
EnglishIntroduction
Product Features
This product is a single-chip DLP® projector. Outstanding features include:
•DLP® technology
•Native 1920 x 1080 1080p resolution
4:3 / 16:9 / L.Box aspect ratio supported
•Enables projecting 3D content via DLP Link Technology: Blue-Ray 3D 
supported and Nvidia 3DTV Play Ready
•Enrichs 3D experience for 2D contents via 2D to 3D convert function 
•Acer ColorBoost technology delivers nature’s true colors for vivid, life-like 
images
•Acer ColorSafe II technology...

2
English
Package Overview
This projector comes with all the items shown below. Check to make sure your 
unit is complete. Contact your dealer immediately if any thing is missing.
Projector with lens cap Power cord VGA cable
HDMI cable Composite video cable Security card
Users guide Remote control Quick start guide
2 x Battery Carrying case Dust filter
3D glasses
LA
MP
TEMPS
OURCERESY
N
CMENU
ZOOM
Acer ProjectorSecurity Card
P/N:MU.JDG00.001H9500BD/E250D/
HE-820J Series
Downloaded From...

3
EnglishProjector Overview
Projector Outlook
Front / upper side
#Description#Description
1
Lens cap6 Elevator feet
2
Zoom lever7 Tilt adjusting wheels
3
Zoom Lens8 Control panel
4
Focus ring9 Power button
5
Remote control receivers10 Lens shift control rings
LAM
P
T
EMPSOURCERESYNCMENU
ZOOM
123
4
58
9
10
76
5
Downloaded From projector-manual.com Acer Manuals 

4
English
Rear side
#Description#Description
1 Power socket 8 Composite video input connector
2 USB ctrl connector 9 S-Video input connector
3 HDMI 1 connector 10 RS232 connector
4 HDMI 2 connector 11 12V DC output connector
5DVI input connector (for digital signal 
with HDCP function)12 PC analog input connector (VGA IN 2)
6Monitor loop-through output connec-
tor (VGA-Out)13 YPbPr/YCbCr input connector
7PC analog signal/HDTV/component 
video input connector (VGA IN 1)14 Kensington™ lock port
235678
13...

5
EnglishControl Panel
#FunctionDescription
1 LAMP Lamp Indicator LED
2KEYSTONEAdjusts the image to compensate for distortion 
caused by tilting the projector.
3RESYNCAutomatically synchronizes the projector to the 
input source.
4 MENU• Press MENU to launch the Onscreen display 
(OSD) menu, back to the previous step for the 
OSD menu operation or exit the OSD menu.
• Confirm your selection of items.
5POWERSee the contents in Turning the Projector On/
Off section.
6 Empowering keyUnique Acer functions:...

6
English
Remote Control Layout
#IconFunctionDescription1 Infrared 
transmitterSends signals to the projector.
2 POWER Refer to the Turning the Projector On/Off section.
3 HIDE Momentarily turns off the video. Press HIDE to hide the 
image, press again to display the image.
4
FREEZE To pause the screen image.
5 ASPECT RATIO To choose the desired aspect ratio (Auto/4:3/16:9/L.Box)
6 SOURCE Press SOURCE to choose from RGB, Component, S-Video, 
Composite, SCART, HDTV and HDMI™ sources.
7 RESYNC...

7
English
10 Backlight
Press   to trigger backlight mode
•Continue to light 3 sec then disappear if no action.
•Continue to light if action and keep 3 sec finally.
11Enter Press ENTER to play media file.
12 Four directional 
select keysUse up, down, left, right buttons to select items or make 
adjustments to your selection.
13 KEYSTONE Adjusts the image to compensate for distortion caused by 
tilting the projector (± 15 degrees).
14 MENU
•Press MENU to launch the Onscreen display (OSD) 
menu, back to the...

8
English
Getting Started
Connecting the Projector
Note: To ensure the projector works well with your computer, 
please make sure the timing of the display mode is compatible 
with the projector.
#Description#Description
1 Power cord 7 3 RCA component cable
2 USB cable 8 S-video cable
3 HDMI cable 9 Composite video cable
4 DVI cable 10 RS232 cable
5 VGA cable 11 12V DC cable
6 VGA to component/HDTV adapter
1
11
DVI-D
DVI-D
42
USB
USB
RS232
RS23210
D-Sub
D-Sub
5
Y
Y
9
RBG
HDTV adapter
RBG
6
7
8
R
B
G
7
R...

9
EnglishTurning the Projector On/Off
Turning on the Projector
1 Remove the lens cap.(Illustration #1)
2 Ensure that the power cord and signal cable are securely connected. The 
Power indicator LED will flash red.
3 Turn on the projector by pressing Power button on the control panel, 
and the Power indicator LED will turn blue.(Illustration #2)
4 Turn on your source (computer, notebook, video player ,etc.). The 
projector will detect your source automatically.
• If the screen displays Lock and Source...

10
English
Turning the projector off
1 To turn the projector off, press the power button. This message appears: 
Please press the power button again to complete the shutdown process. 
Press the power button again.
2 The LED power indicator will turn RED and blink rapidly after the projector 
is turned off, and the fan(s) will continue to operate for about 2 minutes to 
ensure that the system cools properly.
3 As long as the power cord remains plugged in, you can press the power 
button to turn the...