Acer P1100 Dlp Users Guide

21
EnglishAcer Empowering Technology
Empowering  KeyAcer Empowering Key provides four 
Acer unique functions, they are Acer 
eView Management, Acer eTimer 
Management and Acer eOpening 
Management and Acer ePower 
Management respectively. Press   
key for more than one second to launch 
the Onscreen display main menu to 
modify its function.
Acer eView ManagementPress   to launch Acer eView 
Management  submenu.
Acer eView Management is for 
display mode selection. Please refer to 
Onscreen Display Menus...

22
English
Onscreen Display (OSD) Menus
The projector has multilingual OSD that allow you to make image adjustments 
and change a variety of settings.
Using the OSD menus
•To open the OSD menu, press MENU on the remote control or control 
panel.
•When the OSD is displayed, use the   keys to select any item in the 
main menu. After selecting the desired main menu item, press   to enter 
submenu for feature setting.
•Use the   keys to select the desired item and adjust the settings by 
using the   keys....

23
EnglishColor
Display ModeThere are many factory presets optimized for various types of 
images.
•Bright: For brightness optimization.
•Presentation: For meeting presentation with higher 
brightness.
•Standard: For common environment.
•Video: For playing video in a bright environment.
•Education: For education environment. 
•User: Memorize user’s settings.
Wall colorUse this function to choose a proper color according to the wall. 
There are several choices, including white, light yellow, light blue,...

24
English
Note: Saturation and Tint functions are not supported under computer 
mode or DVI mode.
Image
TintAdjusts the color balance of red and green.
•Press   to increase the amount of green in the image.
•Press   to increase the amount of red in the image.
Projection mode
•Front: The factory default setting.
•Rear: Reverses the image so you can project from behind a 
translucent screen.
Projection Location
•Auto: Automatically adjusts projection location of image.
•Desktop
•Ceiling: Turns the image...

25
English
Note: H. Position, V. Position, Frequency and Tracking functions 
are not supported under HDMI or Video mode.
Note: Sharpness functions is not supported under HDMI and Computer 
mode.
Note: 3D function is supported by VGA source only. Please see timing table 
for detail 3D timings.
Note: It needs correct settings on graphic card 3D application program for  Aspect Ratio Use this function to choose your desired aspect ratio.
•Auto: Keep the image with original width-higth ratio and maxi 
mize...

26
English
correct 3D display.
Note: The SW players, such as Stereoscopic Player and DDD TriDef Media 
Player can support 3D format files. You can download these three players 
on web page below,
-  NVIDIA Stereoscopic 3D Video Player:
http://www.nvidia.com/object/3D_Drivers_Downloads.html
- Stereoscopic Player (Trial): http://www.3dtv.at/Downloads/Index_en.aspx- DDD TriDef Media Player (Trial): 
http://www.tridef.com/download/TriDef-3-D-Experience-4.0.2.html
Note: 3D Sync L/R is only available when DLP...

27
EnglishManagement
Setting
ECO Mode Choose On to dim the projector lamp which will lower power 
consumption, extend the lamp life and reduce noise.  Choose Off 
to return normal mode.
High Altitude Choose On to turn on High Altitude mode. Operate the fans at 
full speed continuously to allow for proper high altitude cooling of 
the projector.
Auto Shutdown The projector will automatically shutdown when there is no signal 
input after the allocated time. (in minutes)
Lamp Hour Elapse Displays the lamp’s...

28
English
Screen Capture  Use this function to customize the startup screen. To capture the 
image that you want to use as the startup screen, follow the 
instructions below.
Notice:
Before proceeding with the following steps, make sure that the 
Keystone is set to the default value 0 and the aspect ratio is set 
to 4:3. For details, refer to the Image section.
• Change the Startup Screen from the default setting Acer 
to User.
• Press Screen Capture to customize the startup screen.
• A dialog box...

29
English
Note: This screen capture function is limited by 4:3 aspect ratio only.
Note: For XGA models, to get best quality for you desired image, suggest 
end-user set PC resolution to 1024 x 768 before you use this function.
Note: For SVGA models, to get best quality for you desired image, suggest 
end-user set PC resolution to 800 x 600 before you use this function.
Note: For WXGA models, to get best quality for you desired image, 
suggest end-user set PC resolution to 1280 x 800 before you use this...

30
English
Audio
Timer
Volume•Press   to decrease the volume.
•Press   to increase the volume.
Mute
•Choose On to mute the volume. 
•Choose Off to restore the volume. 
Power On/Off Volume
•Select this function to adjust the notification volume when 
turning the projector on/off.
Alarm Volume
•Select this function to adjust the volume of any warning 
notifications.
Timer Location
•Choose the location of the timer on the screen.
Timer Start
•Press   to start or stop the timer.
Timer Period
•Press   or   to...