Home > Acer > Monitor > Acer V243habd Users Guide

Acer V243habd Users Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Acer V243habd Users Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							
    English
    Standard timing table
    1640x48060 Hz
    2
    640x48072 Hz
    3
    640x48075 Hz
    4
    MAC 640x48066.7 Hz
    5
    VESA 720x40070 Hz
    6
    800x60056 Hz
    7
    800x60060 Hz
    8
    800x60072 Hz
    9
    800x60075 Hz
    10
    MAC 832x62474.55 Hz
    11
    1024x76860 Hz
    12
    1024x76870 Hz
    13
    1024x76875 Hz
    14
    MAC 1152x87075 Hz
    15
    VESA 1152x86475 Hz
    16
    1280x96060 Hz
    17
    1280x102460 Hz
    18
    1280x102475 Hz
    19
    VESA
    VESA 1280x720
    1280x768
    1280x768
    1280x800
    60 Hz
    60 Hz
    75 Hz
    60 Hz
    20
    1360x76860 Hz
    21
    75 Hz
    22
    1440x900
    60 Hz
    231440x900
    24
    SXGA+
    1440x105060 Hz
    25
    WSXGA+
    1680x1050
    1680x105060 Hz
    60 Hz
    60 Hz 75 Hz
    26
    27
    28
    29
    30
    31
    UXGA
    UXGA 1600x1200
    1600x1200
    1920x108060 Hz
    WXGA+ VGA
    SVGA XGA
    SXGA
    WXGA
    ModeResolution
     
    						
    							
    EnglishInstallation
    To install the monitor on your host system, please follow the steps below:
    Steps 
    1 Connect the video cable
    a Make sure both the monitor and computer are switched off.
    b Connect the VGA video cable to the computer. 
    c Connect the digital cable (only for dual-input models).
    (1) Make sure both the monitor and computer are switched off.
    (2) Connect one end of the 24-pin DVI cable to the back of the monitor and the other end to the computers port.
    2 Connect the power cord Connect the power cord to the monitor,  then to a properly grounded AC 
    outlet.
    3 Turn on the monitor and computer Turn on the monitor first, then the  computer. This sequence is very 
    important.
    4 If the monitor does not function properly,  please refer to the             
    troubleshooting section to diagnose the problem.
     
    						
    							
    English
    User controls
    Front panel controls
    1     Power LED: Lights up to indicate the power is turned on. 
    2     Power Switch : Turn the power on or off. 
    3.4   < / >  : Press < or > to navigate to the desired function, press Enter to   
                select the function. Press < or > to change the settings of the   
               current function. 
    5     Menu/Enter : Activate the OSD menu when the OSD is off or activate 
                      / deactivate the adjustment function when the OSD is on. 
    6    Auto adjust button/Exit : 
      a. When the OSD menu is active, this button will act as the exit key    (exit OSD menu). 
      b. When the OSD menu is inactive, press this button for two seconds to   
          activate the Auto Adjustment function. The Auto Adjustment function   
          is used to set the HPos, VPos, Clock and Focus. 
    7   Empowering Key/Exit : 
    a. When the OSD menu is active, this button will act as the exit key    (exit OSD menu). 
    b. When the OSD menu is inactive, press this button to select scenario   
      mode. 
     
    						
    							
    EnglishHow to adjust a setting
    1 Press the Menu button to activate the OSD window. 
    2 Press  < or  > to select the desired function. 
    3 Press the  Menu button again to select the function that you want to 
    adjust. 
    4 Press  < or  > to change the settings  of the current function. 
    5 To exit and save, select the exit function. If you want to adjust any other  function, repeat steps 2 to 4.
    A.Acer eColor Management:  If Acer eColor Management is selected, 
    the Acer eColor Management OSD will appear.
    B. User:  If User is selected, the standard OSD will appear. 
       I. Only analog-input mode                                  II. Only digital-input mode
     
    						
    							
    English
    Acer eColor Management
    •Operation instructions
    1 Press the  Empowering Key to open the Acer eColor Management 
    OSD and access the scenario modes.
    2 Press < or > to select the mode.
    3 Press the Auto-adjust button to  confirm the mode and run Auto 
    Adjust.
    •Features and benefits
    Main 
    menu 
    iconSub menu itemDescription
    User mode User-defined. Settings can be fine-tuned to  suit any situation.
    Text mode Optimal balance of brightness and contrast to  prevent eyestrain. The most comfortable way 
    to read onscreen text.
    Standard mode Default settings. Reflects native display  capability.
    Graphic mode Enhances colors and emphasizes fine detail.  Pictures and photographs appear in vibrant 
    colors with sharp detail.
    Movie mode Displays scenes in clearest detail. Presents  great visuals, even in unsuitably-lit 
    environments.
     
    						
    							
    EnglishUser
    Main 
    menu 
    iconSub 
    menu 
    icon
    Sub menu itemDescription
    Contrast Adjusts the contrast between the  foreground and background of the 
    screen image.
    Brightness  Adjusts the backgr ound brightness of the 
    screen image.
    ACM ACM (Adaptive Contrast Management)  ACM On/Off switch, default  Off. 
    Focus Adjusts picture focus (available in analog  mode only).
    Clock Adjusts the picture clock (available in  analog mode only).
    H. Position Adjusts the horizontal position (available  in analog mode only).
    V. Position Adjusts the vertical position (available in  analog mode only).
    N/A Warm Sets the color temperature to warm  white.
    N/A Cool Sets the color temp erature to cool white.
    User/red Adjusts red intensity.
    User/green Adjusts green intensity.
    User/blue Adjusts blue intensity.
     
    						
    							
    EnglishN/A English Language selection.
    N/A繁體中文
    Deutsch
    Français
    Español
    Italiano
    简体中文
    日本語
    Suomi EMEA version OSD only. 
    Nederlands
    Русский
    H. Position Adjusts the horizontal position of the 
    OSD. 
    V. Position Adjusts the vertical position of the OSD. 
    OSD Timeout Adjusts the OSD timeout.
    N/A
    N/A
    N/A DDC/CI Turns on/off DDC/CI support
    N/A Information Shows the resolution, H/V frequency,  
    input port and serial number for current 
    input. 
    N/A Reset Clears Auto-configuration changes and  sets the color temperature to 
    Warm.
    
    N/A Exit Saves user changes and closes the OSD.
    Main 
    menu 
    iconSub 
    menu 
    iconSub menu itemDescription
    Input Source Select input signal from D-Sub or DVI-D or HDMI   
    Wide Mode   Select Wide mode setting for Full screen, 
    Aspect ratio or 1:1  mode   
     
    						
    							
    EnglishTroubleshooting
    Before sending your LCD monitor for servicing, please check the 
    troubleshooting list below to see if you can self-diagnose the problem.
    VGA mode
    ProblemLED statusRemedy
    No picture visible Blue Using  the OSD, adjust brightness and 
    contrast to maximum or reset to their 
    default settings.
    Off Check the power switch.
    Check if the power cord is properly 
    connected to the monitor.
    Amber Check if the video signal cable is  properly connected at the back of 
    monitor.
    Check if the computer system is 
    switched on and in power saving/
    standby mode.
    Unstable picture Check if the specification of graphics  adapter and monitor is in compliance 
    which may be causing the input signal 
    frequency mismatch.
    Abnormal  picture Image is missing,  off-center, too 
    large or too 
    small on the 
    screen.Using
     the OSD, adjust focus, clock, H-
    position and V-position with non-
    standard signals.
    Check the display setting on your 
    system. In case of a missing image, 
    please select another resolution or 
    vertical refresh rate.
    Wait for a few seconds after adjusting 
    the size of the image before changing 
    or disconnecting the signal cable or 
    switching off the monitor.
     
    						
    							
    English
    DVI mode
    ProblemLED statusRemedy
    No picture visible Blue Using th e OSD, adjust brightness and 
    contrast to maximum or reset to their 
    default settings.
    Off Check the power switch.
    Check if the AC power cord is properly 
    connected to the monitor.
    Amber Check if the video signal cable is  properly connected at the back of 
    monitor.
    Check that the computer system is 
    switched on and in power saving/
    standby mode.
     
    						
    All Acer manuals Comments (0)

    Related Manuals for Acer V243habd Users Guide