Acer V243hqabd Users Guide
Here you can view all the pages of manual Acer V243hqabd Users Guide. The Acer manuals for Monitor are available online for free. You can easily download all the documents as PDF.
Page 11
xi Federal Communications CommissionDeclaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The following local manufacturer/importer is responsible for this declaration: Product name: 23.6 LCD Monitor Model number: V243HQ SKU number: V243HQxxxx Name of...
Page 12
1 Special notes on LCD monitors iii Information for your safety and comfort iiiSafety instructions iiiCleaning your monitor iii Connecting/disconnecting the device iii Accessibility iv Safe listening iv Warnings iv Using electrical power iv Product servicing v Additional safety information vi IT equipment recycling information vi Disposal in structions vii LCD pixel statement vii Tips and information for comfortable use viii Federal Communications Commission Declaration of Conformity xi Unpacking 1...
Page 13
1 EnglishUnpacking Please check that the following items are present when you unpack the box, and save the packing materials in case you need to ship or transport the monitor in the future. LCD monitor User’s guide Quick start guide D-sub cable DVI cable (only dual- input models) AC power cord Audio Cable (Option)
Page 14
2 English Attaching/removing the base Screen position adjustment Attaching: Align the release button on the bottom of the monitor with the corresponding slots on the bottom of the base. Removing: Press the release button as indicated, then pull in the direction of the arrow to remove the base. To optimize the viewing position, you can adjust the monitor tilt by using both of your hands to hold the ed ges of the monitor as shown below. The monitor can be adjusted to 15 degrees up or 5 degrees...
Page 15
3 EnglishConnecting the power cord •Check first to make sure that the pow er cord you use is the correct type required for your area. •The monitor has a universal power supply that allows operation in either 100/120 V AC or 220/240 V AC voltage area. No user-adjustment is required. •Plug one end of the power cord to the AC inlet, and plug the other end into an AC outlet. •For units using 120 V AC: Use a UL-listed cord set, type SVT wire and plug rated 10 A/125 V. •For units using 220/240 V AC: Use a...
Page 16
4 English Connector pin assignment 15-pin color display signal cable PIN No.DescriptionPIN No.Description 1 Red 9 +5 V 2 Green 10 Logic ground 3 Blue 11 Monitor ground 4 Monitor ground 12 DDC-serial data 5 DDC-return 13 H-sync 6 R-ground 14 V-sync 7 G-ground 15 DDC-serial clock 8B-ground 15 6 10 11 15
Page 17
5 English 24-pin color display signal cable PIN No.DescriptionPIN No.Description 1 TMDS data 2- 13 NC 2 TMDS data 2+ 14 +5 V power 3 TMDS data 2/4 shield 15 GND (return for +5 V hsync.vsync) 4 NC 16 Hot-plug detection 5NC 17TMDS data 0- 6DDC clock 18TMDS data 0+ 7 DDC data 19 TMDS data 0/5 shield 8NC 20NC 9 TMDS data 1- 21 NC 10 TMDS data 1+ 22 TMDS clock shield 11 TMDS data 1/3 shield 23 TMDS clock+ 12 NC 24 DDC TMDS clock-
Page 18
6 English ModeResolution Standard timing table 1Dos 720 x 400 70Hz 2 VGA 640 x 480 60Hz 3 VGA 640 x 480 67Hz 4 SVGA 800 x 600 56Hz 5 SVGA 800 x 600 60 Hz 6 XGA 1024 x 768 60Hz 7 XGA 1024 x 768 70Hz 8 SXGA 1280 x 1024 60Hz 9 NA 1440 x 900 60Hz 10 NA 1152x 864 75Hz 11 UXGA 1920 x 1080 60Hz 12 ACER 1280x 800 60Hz
Page 19
7 EnglishInstallation To install the monitor on your host system, please follow the steps below: Steps 1 Connect the video cable a Make sure both the monitor and computer are switched off. b Connect the VGA video cable to the computer. c Connect the digital cable (only for dual-input models). (1) Make sure both the monitor and computer are switched off. (2) Connect one end of the 24-pin DVI cable to the back of the monitor and the other end to the computers port. 2 Connect the power cord Connect the...
Page 20
8 English User controls Front panel controls 1 Power LED: Lights up to indicate the power is turned on. 2 Power Switch : Turn the power on or off. 3.4 < / > : Press < or > to navigate to the desired function, press Enter to select the function. Press < or > to change the settings of the current function. 5 Menu/Enter : Activate the OSD menu when the OSD is off or activate / deactivate the adjustment function when the OSD is on. 6 Auto...