Acer V243phbd Users Guide
Have a look at the manual Acer V243phbd Users Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Acer America Corporation 33 3 West San Carlos St., San Jose CA 95110, U. S. A. Tel : 2 54-298-4000 Fax : 254-298-4147 www.acer.com Federal Communicatio ns Commission Declaration of Conformity This device com plies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device ma y not cause harmful interference, and (2) this device m ust accept any interferen ce receiv ed, incl uding interference that may cause undesired operation. The following local Manufacturer /Importer is responsible for this declaration: Product: LCD Monitor Model Number: V 243PHL SKU Nu mber: V 243PHL xxxxxx (“x” = 0~9, a ~ z, A ~ Z or Blank) Name of R esponsible Party: Acer America Corporation Address of Responsible Party: 333 West San Carlos St. San Jose, CA 95110 U. S. A. Contact Person: Acer Representative Phone No.: 254-298-4000 Fax No.: 254-298-4147
1 Special notes on LCD monitorsiii Information for your safety and comfort iii Safety instructions iii Cleaning your monitor iii Connecting/disconnecting the device iii Accessibility iv Safe listening iv Warnings iv Using electrical power iv Product servicing v Additional safety information vi IT equipment recycling information vi Disposal in structions vii LCD pixel statement vii Tips and information for comfortable use viii Federal Communications Commission Declaration of Conformity xi Unpacking 1 Attaching/removing the base 2 Screen position adjustment 2 Connecting the power cord 3 Power saving 3 Display Data Channel (DDC) 3 Connector pin assignment 4 Standard timing table 6 Installation 7 User controls 8 How to adjust a setting 9 Acer eColor Management 10 User 11 Troubleshooting 13 VGA mode 13 DVI mode 14
1 EnglishUnpacking Please check that the following items are present when you unpack the box, and save the packing materials in case you need to ship or transport the monitor in the future. LCD monitor User’s guide Q uick start guide D-sub cab l e (Option) DVI cable (Option) AC power cord Audio Cable (Option) (Option) DP cable LCD Monitor
2 English Attaching/removing the base Screen position adjustment Attaching: Align the release button on the bottom of the monitor with the corresponding slots on the bottom of the base. Removing: Press the release button as indicated, then pull in the direction of the arrow to remove the base. To optimize the viewing position, you can adjust the monitor tilt by using both of your hands to hold the edges of the monitor as shown below. The monitor can be adjusted to 15 degrees up or 5 degrees down.
3 EnglishConnecting the power cord •Check first to make sure that the pow er cord you use is the correct type required for your area. •The monitor has a universal power supply that allows operation in either 100/120 V AC or 220/240 V AC voltage area. No user-adjustment is required. •Plug one end of the power cord to the AC inlet, and plug the other end into an AC outlet. •For units using 120 V AC: Use a UL-listed cord set, type SVT wire and plug rated 10 A/125 V. •For units using 220/240 V AC: Use a cord set consisting of H05VV-F cord and plug rated 10 A/250 V. The cord set should have the appropriate safety approvals for the country in which the equipment will be installed. Power saving The monitor will be switched to power saving mode by the control signal from the display controller, as indi cated by the amber-colored power LED. The power saving mode will be kept until a control signal has been detected or the keyboard or mouse is activated. The recovery time from power saving mode back to on is around 3 seconds. Display Data Channel (DDC) To make installation easier, so long as your system supports the DDC protocol, the monitor is able to plug-and-play. The DDC is a communication protocol through which the monito r automatically informs the host system about its capabilities; for example, supported resolutions and corresponding timing. The monitor supports th e DDC2B standard. ModeLED light On Blue Power saving Amber
4 English Connector pin assignment 15-pin color display signal cable PIN No.DescriptionPIN No.Description 1 Red 9 +5 V 2 Green 10 Logic ground 3 Blue 11 Monitor ground 4 Monitor ground 12 DDC-serial data 5 DDC-return 13 H-sync 6 R-ground 14 V-sync 7 G-ground 15 DDC-serial clock 8B-ground 15 6 10 11 15
5English 24-pin color display signal cable* PIN No.DescriptionPIN No.Description 1 TMDS data 2- 13 NC 2 TMDS data 2+ 14 +5 V power 3 TMDS data 2/4 shield 15 GND (return for +5 V hsync.vsync) 4 NC 16 Hot-plug detection 5NC 17TMDS data 0- 6DDC clock 18TMDS data 0+ 7 DDC data 19 TMDS data 0/5 shield 8NC 20NC 9 TMDS data 1- 21 NC 10 TMDS data 1+ 22 TMDS clock shield 11 TMDS data 1/3 shield 23 TMDS clock+ 12 NC 24 DDC TMDS clock- PIN No.DescriptionPIN No.Description 1 13 2 14 3 15 4 16 17 18 7 19 20 9 10 11 12 5 8 6 Lane0(p) GND Lane0(n) Lane1(p) GND Lane1(n) Lane2(p) GND Lane3(n) Lane3(p) GND Lane3(n) Config1 Config2 AUX_CH (n) GND AUX_CH (p) Hot Plug Detect DP Power_Return DP Power 20-pin color display signal cable* * only for certain models
7EnglishInstallation To install the monitor on your host system, please follow the steps below: Steps 1 Connect the video cable a Make sure both the monitor and computer are switched off. b Connect the VGA video cable to the computer. c Connect the digital cable (only for dual-input models). (1) Make sure both the monitor and computer are switched off. (2) Connect one end of the 24-pin DVI cable to the back of the monitor and the other end to the computers port. 2 Connect the power cord Connect the power cord to the monitor, then to a properly grounded AC Turn on the monitor and computer Turn on the monitor first, then the computer. This sequence is very important. 5If the monitor does not function properly, please refer to the troubleshooting section to diagnose the problem. dConnect the digital cable (only for DP models). (1) Make sure both the monitor and computer are switched off. (2) Connect one end of the 20-pin DP cable to the back of the monitor and the other end to the computers port. 4 D3 cable 2 VEJPDBCMF VGA cable DVI cable 3
8 English User controls Front panel controls 1 Power LED: Lights up to indicate the power is turned on. 2 Power Switch : Turn the power on or off. 3.4 < / > : Press < or > to navigate to the desired function, press Enter to select the function. Press < or > to change the settings of the current function. 5 Menu/Enter : Activate the OSD menu when the OSD is off or activate / deactivate the adjustment function when the OSD is on. 6 Auto adjust button/Exit : a. Wh en the OSD menu is active, this button will act as the exit key (exit OSD menu). b. When the OSD menu is inactive, press this button for two seconds to activate the Auto Adjustment function. The Auto Adjustment function is used to set the HPos, VPos, Clock and Focus. 7 /Exit : a. Wh en the OSD menu is active, this button will act as the exit key (exit OSD menu). b. When the OSD menu is inactive, press this button to select scenario mode.