Acer X183hbb Users Guide
Here you can view all the pages of manual Acer X183hbb Users Guide. The Acer manuals for Monitor are available online for free. You can easily download all the documents as PDF.
Page 1
TABLE OF CONTENTSSpecial notes on LCD monitors..................................................1 Information for your safety and comfort..................................2 Unpacking........................................................................- ...........5 Attaching/Removing the base....................................................6 Screen position adjustment........................................................6 Connecting the power...
Page 2
EN-1SPECIAL NOTES ON LCD MONITORS T he following symptoms are normal with LCD monitor and do not indicate a problem. NOTES · D ue to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. · You may find slightly uneven brightness on the screen depending on the desktop pattern you use. · The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.01% or less such as a...
Page 3
EN-2Information for your safety and comfort Safe ty instructions Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. CAUTION for accessibility Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to disconnect power to the equipment, be sure to unplug the power cord from the electrical outlet. Warnings •Do not use this...
Page 4
EN-3Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service person- nel when: •the power cord or plug is damaged, cut or frayed •liquid was spilled into the product •the product was exposed to rain or water •the product has been dropped or the case has been damaged •the...
Page 5
EN-4 ----------------------------------------------------------------------------------------------------- Warning! We do not recommend using the product on a couch or bed. If this is unavoidable, work for only short periods, take breaks regularly, and do some stretching exercises. ----------------------------------------------------------------------------------------------------- For more information and help in recycling, please visit the following websites: Worldwide: •take short rests to relax...
Page 6
· LCD MonitorUNPACKING P lease check the following items are present when you unpack the box, and save the packing materials in case you will need to ship or transport the monitor in future. ·AC Power Cord · 15-pin D-Sub Cable · DVI Cable (Only Dual-Input Model) EN-5 · User Manual ·Quick Start Guide Audio Cable (Option) · X183H LCD Monitor
Page 7
EN-6Attaching / Removing the Base I nstall: Align the release button on the bottom of the monitor with the corresponding slots on the bottom of the base. Remove: Depress the release button as indicated first before removing the base and follow the arrow direction to remove it. SCREEN POSITION ADJUSTMENT I n oder to optimize the best viewing position, you can adjust the tilt of the monitor by using both of your hands to hold the edges of the monitor as shown in the figure below. The monitor can be...
Page 8
EN-7CONNECTING THE POWER CORD · C heck first to make sure that the power cord you use is the correct type required for your area. · This monitor has a universal power supply that allows operation in either 100/120V AC or 220/240 V AC voltage area. No user-adjustment is required. · Plug one end of the power cord to the AC Inlet, plug another end to a proper AC outlet. · For unit using at 120 V AC: Use a UL Listed Cord Set, Type SVT wire and plug rated 10 A/125 V. · For unit using at 220/240 V AC (outside...
Page 9
EN-8Power saving T he monitor will be driven into Power Saving” mode by the control signal from the display controller, as indicated by the amber-color power LED. The power saving states will be kept until a control signal has been detected or the keyboard or mouse is activated. The recovery time from Active OFF state back to ON state is around 3 seconds. DDC T o make your installation easier, the monitor is able to Plug and Play with your system if your system also supports DDC protocol. The DDC...
Page 10
EN-9PIN NO.DESCRIPTIONPIN NO.DESCRIPTION 1.Red9.+5V 2.Green10.Logic Ground 3.Blue11.Monitor Ground 4.Monitor Ground12.DDCSerial Data 5.DDC-return13.H-Sync 6.R-Ground14.V-Sync 7.G-Ground15.DDC-Serial Clock 8.B-GroundCONNECTOR PIN ASSIGNMENT 1 5-Pin Color Display Signal Cablej·w">·EV(VS)r·JS4E"uE>4·"“t·rDQ·JS4E"uE>s