Acer X193wcb Users Guide

X193WEN-1024-Pin Color Display Signal Cable
PINMeaningPINMeaning 1.TMDS Data2-13.TMDS Data3+
2.TMDS Data2+14.+5V Power
3. TMDS Data 2/4
Shield 15.GND(return for
+5V hsync.vsync)
4.TMDS Data4-16.Hot Plug Detect 5.TMDS Data4+17.TMDS Data0-
6.DDC Clock18.TMDS Data0+
7.DDC Data19. TMDS Data 0/5
Shield
8. Analogue Vertical
Sync 20.TMDS Data5-
9.TMDS Data1-21.TMDS Data5+
10.TMDS Data1+22.TMDS Clock Shield
11. TMDS Data 1/3
Shield 23.TMDS Clock+
12.TMDS Data3-24.DDC TMDS Clock-...

EN-11X193W
Standard Timing Table
ModeResolution
1VGA720 x 40070Hz
2VGA640 x 48059.94Hz
3MAC640 x 48066.66Hz
4VESA640 x 48072Hz 5VESA640 x 48075Hz
6648 x 50057.7Hz
7VESA800 x 60056.25Hz
8VESA800 x 60060Hz
9VESA800 x 60072Hz
10VESA800 x 60075Hz 11MAC832 x 62474.55Hz
12VESA1024 x 76860Hz
13VESA1024 x 76870Hz
14VESA1024 x 76875Hz
15VESA1152 x 86475Hz
16 17 VESA1280 x 102460Hz
18 VESA1280 x 102475Hz
19 CVT1440 x 90060Hz To reduce the need for adjustment for different modes, the monitor has
default setting...

X193WEN-12
INSTALLATION
To install the monitor to your host system, please follow the steps as given
below:
Steps
1.1-1Connect Video Cable
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the VGA video cable to the computer.
1-2Digital Cable (Only Dual-Input Model) a. Make sure both the monitor and computer are powered-OFF.
b. Connect one end of the 24-pin DVI cable to the back of the
monitor and connect the other end to the computer’s port.
2.Connect power cord Connect the power...

EN-13X193W
USER CONTROLS
Front Panel Controls
1.Power Switch:
To turn ON or OFF the power.
2.Power LED:
Lights up to indicate the power is turned ON.
3.Empowering / Exit:
1) When OSD menu is in active status, this button will act as EXIT-KEY(EXIT
OSD menu).
2) When OSD menu is in off status, press this button to select scenario
mode.
4.Auto Adjust button / Exit:
1)When OSD menu is in active status, this button will act as EXIT-KEY (EXIT
OSD menu).
2)When OSD menu is in off status, press this button for...

X193WEN-14
A.Acer eColor Management
If selected to “Acer eColor Management “ item, will appear the
Acer eColor” OSD
B.USER If selected to “USER” item, will appear the Standard OSD
HOW TO ADJUST A SETTING
1.Press the MENU-button  to activate the OSD window.
2.Press < or  > to select the desired function.
3.Press the MENU-button  to select the function that you want to adjust.
4.Press < or  > to change the settings of the current function.
5.To exit and save, select the exit function. If you want to...

EN-15X193W
·
ADJUSTING THE PICTURE
The descriptions for function control LEDS
A.Acer eColor Management
B.USER Main
Menu icon Sub
Menu icon Sub
Menu item Description
N/AUser mode User defined. Settings can be fine-tuned to
suit any situation
N/AText mode Optimal balance of brightness and contrast
prevent eyestrain. The most comfortable way
to read onscreen text
N/A Standard
mode Default Setting. Reflects native display
capability
N/A Grahpic
mode Enhances colors and emphasize fine detail
N/A Movie
mode...

X193WEN-16
Main
Menu Icon Sub
Menu Icon Sub Menu
Item Description
H. Position Adjust the horizontal position.
(available in Analog  mode only)
V. Position Adjust the vertical position. (available
in Analog  mode only)
N/AWarm Set the color temperature to warm
white.
N/ACool Set the color temperature to cool
white.
User /Red
Adjusts Red/Green/Blue intensity.
User /Green
User /Blue
N/AEnglish
Multi-language selection.
N/A
N/ADeutsch
N/AFrancais
N/AEspanol
N/AItaliano
N/A
N/A
N/ASuomi
EMEA version OSD...

EN-17X193W
Main
Menu
Icon Sub
Menu
Icon Sub Menu
Item Description
H. PositionAdjust the horizontal position of the OSD. V. PositionAdjust the vertical position of the OSD.
OSD TimeoutAdjust the OSD timeout.
N/AAnalogSelect input signal from analog (DSub)
N/A Digital
(only Dual-
InputModel) Select input signal from digital(DVI)
(only Dual-Input Model)
N/ADDC/CITurn ON/OFF DDC/CI support
N/AInformation Show the resolution, H/V frequency andinput
port of current input timing.
N/AReset Clear each old status...

X193WEN-18
·
Acer eColor Management OSD
Acer eColor Management Step 1: Press “  Key “ to open the Acer eColor Management OSD and
access the scenario modes
Step 2:Press “” to select the mode
Step 3:Press “ Auto Key “ to confirm the mode and run Auto Adjust · Operation instructions ·
Features and Benefits
j·w">·EV(VS)r·JS4E"uE>4·"“t·rDQ·JS4E"uE>s 

EN-19X193W
(VGA Mode)
TROUBLESHOOTING
Before sending your LCD monitor for servicing, please check the trouble-
shooting list below to see if you can self-diagnose the problem.
ProblemsCurrent StatusRemedy
No Picture LED ON·Using OSD, adjust brightness and contrast
to maximum or reset to their default
settings.
LED OFF·Check the power switch. ·Check if AC power cord is properlyconnected to the monitor.
LED displays
amber color ·Check if video signal cable is properly
connected at the back of monitor....