Home > Acoustic Energy > Loudspeaker > Acoustic Energy Loudspeaker Aego P5 User Manual

Acoustic Energy Loudspeaker Aego P5 User Manual

Here you can view all the pages of manual Acoustic Energy Loudspeaker Aego P5 User Manual. The Acoustic Energy manuals for Loudspeaker are available online for free. You can easily download all the documents as PDF.

Page 1

Designed by KOI Inc (USA) Exclusively for Acoustic Energy Limited (UK)
Manufactured in Malaysia.
Acoustic Energy Limited, 16 Bridge Road, Cirencester, Gloucestershire GL7 1NJ. UK
Tel: +44 (0)1285 654432   Fax: +44 (0)1285 654430 
AEGO5 Speaker System
Inputs:1 x 9 way G9 Multipin
Outputs:5 x RCA Speaker Connectors
1 x RCA Auxiliary Sub Line level Feed
Controls:1 x Volume Pot. (On front)
1 x Bass Level Pot. (On rear)
1 x Power switch (On rear)
Power Rating:120V Model - 110-120V @ 50-60Hz;...

Page 2


Page 3

Important Safety
To ensure your safety, please read these instructions before
operating this unit.
1.Follow all instructions and observe warnings marked 
on the unit.
2.Always use the correct line voltage. Please refer to page 6,
and find out the correct power requirements in your area.
Please note that different operating voltages may require
the use of different adapters.
3.Do not install the unit in an unventilated rack, or directly
above heat producing equipment such as power...

Page 4

The Acoustic Energy AEGO5 is a powered 5.1 surround sound
speaker system designed to give maximum acoustic
performance with minimal visual impact. It will enable you to
fill your room with sound rather than speakers and get the best
from your AV surround system.
This manual will help you to get the best out of your AEGO5
system and explain how to link it up with your existing digital
decoder (AEGO5) or straight to your DVD player through the
Acoustic Energy Aego decoder (AEGO
Section one 
- will...

Page 5

Connecting Aego5 
When set to “AUTO” 
the Aego system will 
go in to standby mode 
if no signal is detected 
for a period of time 
(10 minutes). 
It will automatically 
switch back on when 
a signal is detected.
Sub Level 
This can be altered to 
obtain preferred level 
of bass.
Sub output
This output is available 
to supply an auxiliary 
subwoofer such as the 
“Acoustic Energy 
Aegis Compact Sub”. 
This may be
recommended when
 used in a large room.
Volume knob
This is the main...

Page 6

As with all loudspeakers, the placement in
relationship to room boundaries (walls etc.) will have
a major effect on their overall performance. As the
Aego Satellites are so small your choice of positions
is far greater and you should use this to maximize
the performance of these remarkable little speakers.
If a speaker is positioned in free air (not close to any
walls etc.) then it will sound brighter. If mounted on
or close to a large object (such as a table or on a
wall) then the mid range will become...

Page 7

Acknowledgments & Trademarks
All contents are subject to change at any time without
notice. No responsibility is assumed for its use; or for
infringements of patents or other rights of third parties
and no patent or license is implied hereby. 
All trademarks are the property of their respective
owners. Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro Logic “ and the double-D
symbol are trademarks of Dolby Laboratories.
Confidential Unpublished Works. (c)1992 - 1997 
Dolby Laboratories,...

Page 8

1. After properly connecting AEGOP5 to your audio sources and amplifier, plug in AEGOP5’s AC adapter to an AC outlet.
2. Turn on the power of AEGO
P5 by pushing the POWER button on the front panel. Turn on the power of all audio
sources, amplifier, or powered subwoofer.
3. Installation is now complete, get ready to experience true Dolby Digital or DTS surround sound. 
Note: To prevent damage to speakers, when playing music or a movie, ensure the volume is set low initially. 
Gradually turn the volume up...

Page 9

1. The POWER Button
Turns AEGOP5 on or off.
1. MULTIPIN Audio Output:
This output feeds 6 channels audio signals to the matching input on a control centre or power amplifier via a multipin (DIN) cable.
2. Main Outputs (Front Left, Front Right, Rear Left, Rear Right, Centre and Sub):
The Six outputs feed audio signals to the matching inputs on a control centre or power amplifier.
3. AUX1 AUX2 and LINE Inputs:
These inputs accept signals from stereo analog signal sources.
4. OPTICAL and DIGITAL inputs:...

Page 10

1 POWER Button
On/off key
Select from the 5 different source inputs 
3 TEST Button
Test signal for the 6 discrete channels
4 MUTE Button
Mute the sound (toggle on and off)
5 PRO LOGIC Button
Select from 4 different surround settings
6 DELAY Button
Select the desired channel to engage the time
delay adjustment
7 BALANCE Button
Set the volume setting for each of the 6 channels
8 EQ SETUP Button
Select up to 5 EQ Band Settings
9 EQ ON/OFF Button
Activate the selected EQ Band Setting
Start reading Acoustic Energy Loudspeaker Aego P5 User Manual

Related Manuals for Acoustic Energy Loudspeaker Aego P5 User Manual

All Acoustic Energy manuals