Home > Acumen > Camera > Acumen Camera Dome Series AiPU53K05N0B User Manual

Acumen Camera Dome Series AiPU53K05N0B User Manual

Here you can view all the pages of manual Acumen Camera Dome Series AiPU53K05N0B User Manual. The Acumen manuals for Camera are available online for free. You can easily download all the documents as PDF.

Page 1

 
 
 
   
 
 
 
 
 
 I N S T R U C T I O N   M A N U A L  
  Air Force  Dome   Series  
H.264 HD AiP cameras    

Page 2

 1 
Executive Summary 
Full HD AiP cameras, AirForce Series, adopts the latest compression technologies providing 4-Streaming of H.264 and JPEG in different resolutions. 4-Streaming technologies allow transmitting digital video at various bitrate and frame rate to fit both high and low bandwidth network environment.  Full HD AiP camera series are equipped with 2, 3, or 5 progressive mega-pixel CMOS providing superior video quality.    The DSP technologies of the AiP cameras provide wide dynamic range...

Page 3

 2 
 Dynamic DNS (DDNS) supported  Network time protocol (NTP) supported  Support PCM/G.711  Support ONVIF protocol  Support AIM Software HD 2.6  
Trademark Acknowledgments 
Microsoft, Windows 2000, Windows XP, Windows Vista, Windows 7, ActiveX, and Internet Explorer are registered trademarks of Microsoft Corporation in the U.S. and/or other countries. 
Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and other...

Page 4

 3 
Other References 
Mobile phone For free mobile surveillance, please refer to eMobile document in the product CD 
or download the document from our company web site. 
AI Universal ActiveX Control Sample code and document are included in product CD and can be downloaded 
from our company web site. 
AI HTTP API For non-ONVIF integration, please see AI HTTP API document.  We adopt 
HTTP API document for all Full HD AiP cameras. 
 
Caution 
 Do not drop or strike this equipment 
 Do not install the...

Page 5

 4 
Table of Content 
Chapter 1    System Overview .................................................................................... 6 
Chapter 2    Before Accessing AiP camera................................................................. 7 
Chapter 2-1 Configure IP Address Using IPScan Utility ........................................ 7 
Chapter 2-2 Configure IP Address Using HTML Page .......................................... 8 
Chapter 2-3 Internet Browser Setting & Software Component Required...

Page 6

 5 
Chapter 3-5-3 Video Quality ........................................................................... 24 
Chapter 3-5-4 MoonLight function .................................................................. 26 
Chapter 3-5-5 Privacy Mask ........................................................................... 26 
Chapter 3-5-6 Region of Interest (ROI) .......................................................... 27 
Chapter 3-6 IR Cut Removable...

Page 7

 6 
Chapter 1 System Overview 
Chapter 1-1 System Requirements 
The AiP camera’s Full HD H.264 video compression technology can provide high compression rate and superior video quality.    However, the performance highly depends on both CPU computational power of a client PC and the network bandwidth for transmitting video streaming.  The following sections specify system requirement for running Full HD H.264 AiP camera:               
Chapter 1-2 Software Requirements 
 AI Universal ActiveX software...

Page 8

 7 
Chapter 2 Before Accessing AiP camera 
Before accessing the AiP camera, make sure that the camera’s RJ-45 network cable, audio cable, and AiP camera’s power cable are properly installed.    For setup IP address, please consult your network administrator for available IP addresses.    The default IP address of AiP camera is 192.168.0.200.    User can also use default IP address to verify AiP camera’s network connection.     
Chapter 2-1 Configure IP Address Using IPScan Utility 
To configure IP...

Page 9

 8 
Chapter 2-2 Configure IP Address Using HTML Page 
To change IP address using HTML page, please first type the default IP address, 192.168.0.200 in Internet browser and follow steps below:  Logon H.264 FULL HD AiP camera using default username and password—“admin” and “pass”.  Click on “Configure” hyper link.  Click on “Network->General” hyper link.  Type or modify edit box for IP address, subnet mask, gateway, or HTTP connection port.  Click on Submit button.  
Chapter 2-3 Internet Browser...

Page 10

 9 
Chapter 2-4 Login 
There are two levels of user authentication including administrator and guest for accessing the H.264 FULL HD AiP camera.   
 
The default settings of username and password are described as follows:  
 Administrator Guest 
Username admin guest 
Password pass guest 
 To logon the H.264 FULL HD AiP camera, please type username and password in logon HTML page and click on Submit button to enter the system.  
Start reading Acumen Camera Dome Series AiPU53K05N0B User Manual

Related Manuals for Acumen Camera Dome Series AiPU53K05N0B User Manual

All Acumen manuals