Home > Acumen > Camera > Acumen Camera Dome Series AiPU53K35N0W User Manual

Acumen Camera Dome Series AiPU53K35N0W User Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Acumen Camera Dome Series AiPU53K35N0W User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 53 Acumen manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 33
    Add page 31 to Favourites
    image text
    Enable zoom 
    							 30 
Chapter 5-5-3 Event Triggering SD Card Recording 
To  record  video  onto  an  SD  Card,  insert  an  SD  card  into  the  SD  card  slot.  Enable  the  SD 
card  

recording feature. The IP camera will start to record video to the SD card. 
Chapter 5-5-4 SD Card Recording Setting 
For 
 SD card recording settings, see the below: 
 
 
 
  SD Recording: enable SD card recording 
  Rec

ording Format: recording resolution 
  SD System Status: SD Linux mounting status 
  SD Card State: SD card inserting status 
  SD Card Total Space: SD card total capacity 
  SD Card Free Space: SD card free space 
 
To un-mount the SD card, click “un-mount SD Card”. The sy
 stem may crash if the SD 
card is a not un-mounted properly. 
 
To download the SD card AVI recoding clips, click Advance->System->SD Card Backup 
File. Right mouse click the required files and save the AVI them to a local PC.
    Add page 32 to Favourites
    image text
    Enable zoom 
    							 31 
Appendix   
Advance Network DDNS and PPPoE Technologies 
The advantage of using DDNS and PPPoE is to remove the costs associated with paying 
for  a  s
 tatic  IP  address.  H.264  AVC  IP  camera’s  PPPoE  service  will  provide  a  dynamic 
global IP address after the system reboot has been carried out. This is the address needed 
to  access  the  video  server  over  Internet.  The  IP  address  may  get  changed  periodically. 
When  ISP  re-assigns  a  new  IP  address  to  the  H.264  AVC  IP  camera,  the  IP  camera 
notifies the DDNS service. A remote PC can access the H.264 AVC IP camera by typing 
the domain name in a browser. The domain name gets resolved by the DDNS service and 
gets translated to its dynamic  global IP address. The dynamic  global  IP address can now 
be accessed by the remote PC. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
SD Card

 Compatibility List 
Manufacturer  Size SDHC
 /SDSC Sandisk 8 / 16 / 32 GB  SDHC Transcend 8 / 16 / 32 GB  SDHC 
DDNS Server 
2.ISP assigns global IP to IP CAMERA 
Int

ernet 
4.    Access IP CAMERA using 
the dynamic global IP 
address. 
ISP 
Remote PC 
5.  Resolve domain name to IP       address and sent back to 
remote PC. 
1.  Get IP address from ISP after reboot. 
2.  Notify DDNS server for the new IP address if 
FAST DOME CAMERA gets reboot or assigned a new IP address.
    Add page 33 to Favourites
    image text
    Enable zoom 
    							 32 
Specification 
 
 
Video 
compression H.264 and Motion JPEG, dual codec 
Resolution  1080P(1920 x 1080), 720P(1280 x 720), D1(720 x 480), CIF(352 x 240) H.264 : up to 15 fps @ 1920 x 1080 , 30fps @ 1280 x 720 , 30fps @ 720 x 480 Maximum frame 
rate 
Motion JPEG : up to 15 fps @ 1920 x 1080 , 30 fps @ 720 x 480 , 30 fps @ 352 x 240 
Streaming   Triple Streaming Video streaming  RTSP: RTP/HTTP, RTP/TCP, RTP/UDP 
Video bitrate 5Mbps to 128Kbps 
Change frame rate and bitrate on-the-fly 
CBR/VBR/GOP supported 
Security Base64 HTTP encryption 
Multiple user access levels with password protection 
10 user accounts available 
Users 
8 simultaneous users OSD    Text overlay for camera name, date and time Privacy mask  Four masks 
Alarm/motion Audio detection 
Motion detection   
External digital input alarm (applicable for only digital input models) 
Image upload over FTP and email by above alarm signals 
CPU, memory  Embedded SoCARM11 CPU at 528Mhz, 256 MB DDR, 256 MB flash memory IR cut removable  Auto, day , night, scheduling, day & night models only Alarm input  TTL input +3VDC to +5VDC, alarm input models only Alarm output  DC 24V 1A, dry-contact (N.O.), alarm output models only Maintenance  Firmware update via HTTP, Firmware available at web site Network interface  10Mbps/100Mbps, RJ-45 Two-way audio  G.711 16Kbits u-Law, audio model only 
PC requirement OS: Windows 2000, Windows XP, Windows Vista, Windows 7 
Browser: Windows Internet Explorer 6.0 or above 
CPU: Intel Pentium 4 1.8GHz or above 
RAM: 1GB or above 
Network protocols 
IP,  TCP,  UDP,  HTTP,  SMTP,  NTP,  DDNS,  UPnP,  FTP,  ARP,  DHCP,  PPPoE,  DNS,  RTSP, 
RT
CP, Telnet, ONVIF, ICMP 
Mobile phone & 
PDA    Support iPhone, iPad, and Android 
System integration  ONVIF and HTTPAPI   CMS
                       AiM   HD 2.6 support OS  Embedded Linux 2.6.32
    All Acumen manuals Comments (0)

    Related Manuals for Acumen Camera Dome Series AiPU53K35N0W User Manual