AcuPanel CV12 User Manual
3.6 Using the DVR Port
This unit comes with a four channels DVR module that connects AcuPanel12CV to CCTV cameras through DVR waterproof extension cable
and four channels DVR cable, Also supports IP cameras data transfer rates at 10M bps and can be up to 100Mbps. The 10Base-T standard
also called Twisted Pair Ethernet is connected with RJ -45 connectors. The 100Base-TX is based on the older Ethernet standard. Because it is
10 times faster than Ethernet, it is often referred to as Fast E thernet. The built-in LAN module provides a standard RJ -45 connector.
To connect the twisted-pair cable to your LAN port:
1. Connect one end of the cable into the network wall outlet or HUB.
2. Connect the other end of the cable into the Panel PC RJ -45 LA N port.
3. 7. Touchscreen
AcuPanel12 is designed using Color Active Matrix LCD technology with a high quality touch sensitive surface. The touch screen is a display
that can detect the presence and location of a touch within the display area by a finger, hand or other passive objects, such as a stylus. It
enables one to interact with what is displayed directly on the screen, rather than indirectly with a mouse.
With its adjustable, yet rigid backbone, the touch screen responds to fingertip input in place of a mouse and is highly resistant to solvents and
chemicals found in industrial environments. It lets one do so without requiring any intermediate device, The display is sealed along the panel
surface to prevent liquids from dripping into the unit under normal use.
Chapter 4 The BIOS Setup Program
This system comes with a chip from Award BIOS that contains the ROM Setup information for your system. (This chip serves as an interface
between the processor and the rest of the system components. ) This section explains the information contained in the Setup program and tells
you how to modify the settings according to your system configuration.
4.1. CMOS Setup Utility
The Setup utility program allows updates to the system configuration settings. The BIOS setup values will be saved in the CMOS. It is
executed when you change the system configuration, you change the system backup battery, or the system detects a configuration error and
asks you to run the Setup program. Use the arrow keys to select , and press Enter to run the selected program .
4.2. Standard CMOS Features