Home > Acura Embedded > Power Brick > Acura Embedded BT878GPIO1 Setting in acuraVision User Manual

Acura Embedded BT878GPIO1 Setting in acuraVision User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Acura Embedded BT878GPIO1 Setting in acuraVision User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 51 Acura Embedded manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							AcuraVision                                                                                                                                                                                                                                                                                     Camera Detect Event Guide 
     
      
    7. Use free hand sketching to wipe out Mask areas. 
     
     
     
    8. Now you know how to do masks. And hope the mask can help 
    you to a precise detection area. 
    If you feel the moving video disturb your mask task, you can press 
    this  Freeze Video button to freeze the video for 
    your convenience. 
                    
     
     
    Event Information Checking 
     
    In  general,  when  Click  button,all  detect  event 
    messages will be found. 
      
              
                      
     Type If you want to view only the logs of one type of  
    event such as Motion event, select it from the Type list. 
     
    Log list The Log list shows details about each event,  
    such as the start and end times of the event, camera 
    number (indicated by C1 – C4) or sensor number  
    (indicated by S1 - S16) that detected the event, type of   
    event, etc. 
     
     Camera If you want to view only the logged events of one 
         camera, select the camera number from the Camera list. 
      
      Clear All Click this button to delete all event logs from the 
          list.These events are not deleted from the record  
          database. 
     
     View Click this button to launch the Event Viewer   
    program and play back a selected event. Not all events  
    contain video recordings. 
     
     
     
    Event Log 
    19 
     
    20 
               3   3   
    						
    							AcuraVision                                                                                                                                                                                                                                                                                     Camera Detect Event Guide 
     
    Responding to events 
     
    Site  Server  can  be  configured  to  automatically  respond  to  detected 
    or manually triggered events. There are four options:  
     
     
     
      Notifications         Click this option to enable Site Server to send   
                                        out notifications when events have been  
                                        auto-detected.  
      External devices  Click this option to enable Site Server to send  
                                        out  signals to external devices when events  
                                        have been auto-detected . 
      FTP event image  Allow uploading of sequences of snapshots 
                                         to an FTP server when an event has been   
                                        detected. 
      PTZ camera to     Allow any fixed surveillance camera to move 
            Preset                  one or more PTZ cameras to preset positions 
                                        when there are motion detected, sensor  
                                        detected. 
     
     
    Types of notifications 
     
    In  the  Notification  dialog  box,  choose  from  the  different  types  of 
    notifications  by  selecting some  or all  of  the  checkboxes.  For  each 
    selected  type  of  notification,  click  its corresponding  Options  button 
    to configure settings. 
     
     
      
    Attention:  
    Email is not work for Flow Counting feature because Flow 
    Counting notification is already saved 
    @C:\ProgramFiles\acurasys\acuraVision\FlowCountData 
    \Camera01~04\Camera01~04-2012-08-08.CSV  
    or  Click  button, all detect event 
    messages(include Flow Counting messages) will be found. 
     
    � Email 
     
    Send  out  an  e-
    mail  message. 
    Configure  the 
    following sett-
    ings  to  enable 
    notification e-
    mails to  be 
    sent:  
    21 
     22 
             3   3   
    						
    							AcuraVision                                                                                                                                                                                                                                                                                     Camera Detect Event Guide 
     
     
     
    SMTP               Default to use acuraVision built-in SMTP 
          assignment     server emulation. 
    Subject             By default, the e-mail subject contains  
                                  variables that will automatically be replaced    
                                  with the site name, camera name &  event 
                                  type. If you want to specify your own e-mail 
                                  subject, type your text in the provided text box. 
    Sender             Specify the senders e-mail address. 
     
    Address list      Shows the e-mail addresses that will receive the 
    event notification. Click on an e-mail address to select it for deletion 
    or modification. 
      
      Add              Enter the e-mail address of a recipient in the blank     
                                 field above this button, then click this button to    
                                add the e-mail address to the Address list. 
      Delete          Remove the selected e-mail address  from the   
                                address list. 
      Modify          Modify an e-mail address. 
      Test             To test sending an email. 
            Note:          Before do test, you should confirm network  
                                connection is ready. 
      Attach snapshot          Include one or more snapshots of a  
                                               detected event as email attachment. 
           Size                             Set the image dimensions.   
           Number                       Attachment can be up to 6 images. 
           Interval                        Time interval between snapshots                                                   
                                               from 1 to 5 seconds. 
     
     
     
     
     
     
     
    � Fax 
    Send  out  a  fax  message. Need  to  configure  the COM  port to  send 
    fax. 
    � Phone 
    Notifies  by  phone  and  sends  out  a  voice  message. Need  to 
    configure phone modem &  its driver to  be able  to  dial  out  and  send 
    voice messages.          
     
    � Alarm  
     
    Play  an  alarm  sound.  From  the  drop-down  list,  select  from  the 
    available  sounds,  or select  Custom  and  then  click  Record  to 
    record  your  own  alarm  sound.  To  listen  to  a preview  of  your 
    recorded sound, click Play. You can also select the Loop option to 
    sound the alarm until the event terminates. 
     
    � Flash message at local site 
    An  Event  indicator  will  be  displayed  if  and  only  if  the  Flash 
    message at local site checkbox is selected in the Notification dialog 
    box. A blinking Event indicator will be displayed on the bottom left 
    corner of a split screen on Site Server when an event is detected. 
     
    � Flash message at remote site 
    Display  an  Event  indicator  on  the  Remote  Viewer  interface  of 
    users  who  are  remotely viewing  your  video  cameras  from  a  Web 
    browser.  A  blinking  Event  indicator  will  be displayed  on  the  top, 
    central  portion  of  a  split  screen  on  the  Remote  Viewer  when  an 
    event is detected.                                                                                 
     
    � Change to single view and delay for __ seconds 
    Switches  the  Site  Server screen  to  single  view  to  display  live  the 
    camera  from  which  an event  has  been  detected.  Specify  the 
    duration  (in  number  of  seconds)  for  retaining  the display  in  single 
    view (after the event occurs) before changing Site Server back to 
    split-screen view.  
     
    23 
     
    24 
               3   3   
    						
    All Acura Embedded manuals Comments (0)

    Related Manuals for Acura Embedded BT878GPIO1 Setting in acuraVision User Manual