Home > Adam Equipment > Scale > Adam Equipment PTM Drum and Wheelchair Scale GKREVL1 User Manual

Adam Equipment PTM Drum and Wheelchair Scale GKREVL1 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Adam Equipment PTM Drum and Wheelchair Scale GKREVL1 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 35 Adam Equipment manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							 
    59                              © Adam Equipment Company 2013 
    1.18.8 F8 –ZERO  MODE  
     
    To enter this parameter, press the  [Tare] key when “ F8 ZEm” is shown. 
    Select  the  Zero  mode  desired.  In  all  but  special  ca ses  Zero  Mode  1  is  used.      The 
    other 2 zero modes are for unique locations in the  world and effect the +/- range of 
    the zero.      
    Press the  [Func] key to change the value. 
    Press  [Tare]  to accept the displayed value. 
    Press  [Zero]  to return to weighing. 
      
    1.18.9  F9 –LOW VOLTAGE DETECTION  
      
    This parameter allows detection of low voltage when  the battery wears down. 
    To enter this parameter, press the  [Tare] key when  “F9 LVd” is shown. 
    The display will show if the LVD Mode is set to on  or oFF.     
    Press the  [Func] key to change the value. 
    Press  [Tare]  to accept the displayed value. 
    Press  [Zero]  to return to weighing. 
      
    						
    							 
    60                              © Adam Equipment Company 2013 
    1.18.10 F10 –CALIBRATION COUNT (GK-M ONLY) 
    This parameter allows the calibration and parameter  counting function to be active.  
    To enter this parameter, press the  [Tare] key when  “F10  Cn” is shown. 
    The display will show if the Calibration Counting   Mode is set to on or oFF. If On the 
    Calibration  count  and  Parameter  count  will  be  seen  at  power  on  as  described  in 
    section  6.0.    If  set  to  Off  the  only  method  that  ca n  be  used  for  access  to  the 
    calibration or parameters is to place the jumper on  pins 1-2 of J1, See section 15.2.     
    Press the  [Func] key to change the value. 
    Press  [Tare]  to accept the displayed value. 
    Press  [Zero]  to return to weighing. 
      
    1.18.11  F10 –AUTO ZERO RANGE (NOT AVAILABLE ON GK-M) 
    This parameter set the range the autozero is active  within.  
    To enter this parameter, press the  [Tare] key when  “F10  Az” is shown.  
    The display will show the current setting, 0.5d, 1d , 2d, or 5d. 
    Press the  [Func] key to change the value. 
    Press  [Tare]  to accept the displayed value. 
    Press  [Zero]  to return to weighing. 
      
    						
    							 
    61                              © Adam Equipment Company 2013 
    REPLACEMENT PARTS AND ACCESSORIES 
    If you need to order any spare parts and accessorie s, contact your supplier or Adam 
    Equipment. A partial list of such items is as follo ws- 
     
    ·  Main Power cord or adaptor for  
    USA versions. 
    ·   Replacement Battery  ·
      In use cover 
    ·   Printer, etc. 
     
      
    						
    							 
    62                              © Adam Equipment Company 2013 
    SERVICE INFORMATION 
    This manual covers the details of operation. If you  have a problem with the indicator 
    that  is  not  directly  addressed  by  this  manual  then  contact  your  supplier  for 
    assistance.  In  order  to  provide  further  assistance,   the  supplier  will  need  the 
    following information which should be kept ready: 
     
    A. Details of your company 
     
       -Name of your company: 
        -Contact person’s name:  
        -Contact telephone, e-mail,   
         fax or any other methods: 
    B.  Details of the unit purchased  
       
      (This  part  of  information  should  always  be  availa ble  for  any  future  correspondence. 
    We suggest you to fill in this form as soon as the  unit is received and keep a print-out in 
    your record for ready reference.)
     
    Model name of the indicator: GK_____ 
    Serial number of the unit:  
    Software revision number  
    (Displayed when power is first turned on): 
     
    Date of Purchase:  
    Name of the supplier and place:  
     
    C.   Brief description of the problem 
              
    Include any recent history of the unit. For example :        
       -Has it been working since it’s delivered  
       -Has it been in contact with water  
      -Damaged from a fire  
      -Electrical Storms in the area 
      -Dropped on the floor, etc.   
    						
    							 
    63                              © Adam Equipment Company 2013 
    WARRANTY INFORMATION    
    Adam  Equipment  offers  Limited  Warranty  (Parts  and  L abour)  for  the  components  failed  due  to  defects 
    in materials or workmanship.  Warranty starts from the date of delivery. 
     
    During the warranty period, should any repairs be n ecessary, the purchaser must inform  its supplier or 
    Adam  Equipment  Company.  The  company  or  its  authoris ed  Technician  reserves  the  right  to  repair  or 
    replace  the  components  at  any  of  its  workshops  depending  on  the  severity  of  the  problems.  However, 
    any  freight  involved  in  sending  the  faulty  units  or  parts  to  the  service  centre  should  be  borne  by  the  
    purchaser. 
     
    The  warranty  will  cease  to  operate  if  the  equipment   is  not  returned  in  the  original  packaging  and  with 
    correct  documentation  for  a  claim  to  be  processed.  All  claims  are  at  the  sole  discretion  of  Adam 
    Equipment. 
     
    This  warranty  does  not  cover  equipment  where  defect s  or  poor  performance  is  due  to  misuse, 
    accidental  damage,  exposure  to  radioactive  or  corrosive  materials,  negligence,  faulty  installation, 
    unauthorised  modifications  or  attempted  repair  or  f ailure  to  observe  the  requirements  and 
    recommendations as given in this User Manual. 
            
    Repairs  carried  out  under  the  warranty  does  not  extend  the  warranty  period.  Components  removed 
    during the warranty repairs become the company prop erty. 
            
    The  statutory  right  of  the  purchaser  is  not  affected  by  this  warranty.  The  terms  of  this  warranty  is 
    governed  by  the  UK  law.  For  complete  details  on  War ranty  Information,  see  the  terms  and  conditions 
    of sale available on our web-site. 
     
      
    						
    							64  © Adam Equipment Company 2013  
    						
    							65  © Adam Equipment Company 2013
     
    APPENDIX 
    PARAMETER  LAYOUT for  GK / GFK SCALES Press  the [Func]  key  to 
    e\fter F\b\fctio\fs mode. 
    K
     ey f\b\fctio\fs while i\f this sectio\f 
    [Tar\f] e\fter a parameter or accept the cha\fges 
    [Func ] move to \fext parameter or optio\f 
    [Z\fro]  ret\br\f to previo\bs parameter or ret\br\f to weighi\fg 
    FUNC 1  Check weighi\fg parameters F1 LLk 
    Limit Lock  oFF  
    P
    
    St (pre-set)  F2 L\fd 
    LED display  bAr 
    (Bar type) 
    S
     pot (spot type) 
    S
     PEA (whole segme\ft) F3 bEP 
    Beeper Co\ftrol  bP oFF 
    b
    
    P Int (I\fside Limits) 
    b
     P otL (O\btside Limits) F4 CPS 
    Check  weighi\fg 
    password  E\fter  \bsi\fg  \f\bmeric 
    method F5 NCk 
    Negative  Check 
    weighi\fg On 
    Off 
    FUNC 2 RS-232 Parameters C1 on 
    E\fable RS-232 
    Prt on  
    Prt oFF
     C2 bd 
    Ba\bd Rate  600  
    To 
    19200 C3 Prm 
    Pri\fti\fg Mode  mA StA 
    (Ma\f\bal Stable)  
    mA A\fY (Ma\f\bal A\fy) 
    A\b StA  (A\bto Stable) 
    A\b E\fd (A\bto E\fd) 
    Ct StA  (co\fti\f\bo\bs Stable) 
    Ct AnY (Co\fti\f\bo\bs A\fy) C4 Aon 
    E\fable Acc\bm\blatio\f  on  
    oFF
     C5 Ln 
    La\fg\bage for pri\fti\fg  English  
    Fr\fnch  
    G\frman  
    Spanish C6 Uid 
    User ID E\fter \bsi\fg \f\bmeric keys C7 Sid 
    Scale ID E\fter \bsi\fg \f\bmeric keys C8 LAb 
    LAb O\f 
    Lab Off 
    FUNC 3 Scale Parameters S1 Un 
    U\fits e\fable kg  
    lb S2 bL 
    Backlight EL oFF  
    EL on
     
    E
     L AU (A\bto) S3 AoF 
    Set  A\bto  off  time 
    (mi\f.)  SLP 0  
    SLP 1 
    SLP 5 
    S
    
    LP 10 S4 dt 
    Set time a\fd date Set  as  described  i\f 
    ma\f\bal S5 dIS 
    Display mode All  
    StAb
     (o\fly whe\f stable) S6 Fi 
    Set Filter  SLoW  
    nor
     (\formal) 
    F
     ASt S7 SPS 
    Scale password E\fter \bsi\fg \f\bmeric keys S8 CAL 
    Perform calibratio\f 
    FUNC 4 Scale Parameters F4 Pct 
    Perce\ft Weighi\fg  E\fter 100% 
    refere\fce weight F4 Ani 
    A\fimal weighi\fg FLt 1   
    Filter setti\fg 
    To  
    FLt 5  
    						
    							66  © Adam Equipment Company 2013
      
    						
    							67  Adam Equipment Company 2013 
    Adam Equipment  
     ADAM EQUIPMENT, Maidstone Road, 
    Kingston Milton Keynes, MK10 0BD U.K. 
    
    Tel: (01908) 274545        Fax: (01908) 641339 
    Intl Tel:   -44 1908 -274545   Intl Fax: -44 1908 641339 
    E-Mail Address: [email protected] 
    D eclaration of Conformity   Verklaring van overeenstemming 
    Konformitätserklärung   Dichiarazione di Conformità 
    Déclaration de Conformité   Declaración de Conformidad 
    The non-automatic weighing instrument          Het niet –automatische weegwerktuig 
    Die nicht- automatischen Wägeapparate    Strumento per pesatura non automatico  
    L’instrument de pesage à fonctionnement non automatique     Imstrumento para pesaje non automatico  
    Manufacturer :  Adam Equipment Co. 
    Ltd. Hersteller : 
    Adam Equipment Co. 
    Ltd.  Fabricant :  Adam Equipment Co. Ltd. 
    Type:  GK..M / GFK..M / 
    GBK..M  Typ:  GK..M / GFK..M / 
    GBK..M  Type: GK..M / GFK..M / 
    GBK..M 
    No  of  the  EC 
    type-approval 
    certificate:  UK2860 
    GB1320  Nr.  der  EG-
    Bauartzulassung: 
    UK2860 
    GB1320  N
     du certificate 
    d’approbation 
    CE de type: 
    UK2860 
    GB1320 
    Corresponds  to  the  production  model 
    described in the EC type-approval certificate 
    and  to  the  requirements  of  the  Council 
    Directive  2009/23/EC  as  amended  and  to 
    the  requirements  of  the  following  EC 
    Directives:  Entspricht  dem  in  der  Bescheinigung  über  die 
    Bauartzulassung  beschriebenen  Baumuster,  sowie 
    den  Anforderungen  der  EG-Richtlinie  2009/23/EC 
    in  der  jeweils  geltenden    Fassung  und  den 
    Anforderungen folgender EG-Richtlinien: 
    Correspond  au  modèle  décrit  dans  le  certificat 
    d’approbation CE de  type,  aux  exigences de  la 
    directive  2009/23/EC  modifiée  et  aux 
    exigences des directives CE suivantes: 
    2006/95/EC  Electrical  equipment  for  use  within  certain 
    voltage  limits  (Low 
    Voltage Directive)  2006/95/EC  Elektrische  Betriebsmittel 
    zur  Verwendung  innerhalb 
    bestimmter 
    Spannungsgrenzen 
    (Niederspannungsrichtlinie)  2006/95/EC  Matériel  électrique  pour 
    utilisation  dans  des  limites 
    de  tension  définies 
    (Directive Basse Tension) 
    2004/108/EC  Electromagnetic  compatibility  2004/108/EC  Elektromagnetische 
    Verträglichkeit  2004/108/EC  Compatibilité 
    électromagnétique 
    This  declaration  is  only  valid  when 
    accompanied by a Certificate of Conformity 
    issued by a Notified Body.  Diese  Erklärung  gilt  nur  in  Verbindung  mit  einer 
    Konformitätsbescheinigung einer benannten Stelle 
    Cette  déclaration  est  seulement  valide  quand 
    elle  est  accompagnée  par  une  Attestation  de 
    Conformité délivrée par un Organisme Notifié. 
    Fabrikant :  Adam Equipment Co.  Ltd. Produttore 
    Adam Equipment Co. 
    Ltd.  Fabricante  Adam Equipment Co. Ltd. 
    Type:  GK..M / GFK..M / 
    GBK..M  Modello: 
    GK..M / GFK..M / 
    GBK..M  Tipo: 
    GK..M / GFK..M / 
    GBK..M 
    Nummer  van  de 
    Verklarling  van 
    EG-
    typegoedkeuring  UK2860 
    GB1320  N.  di  certificato  di 
    approvazione  di  tipo 
    CE 
    UK2860 
    GB1320  Numaro  del 
    certificado  de 
    aprobacion  de 
    tipo CE:  UK2860 
    GB1320 
    Conform  met  het  model  beschreven  in  de 
    verklaring  van  EG-typegoedkeuring  en  met 
    de  voorschriften  van  EG  richtlijn 
    2009/23/EC  zoals  gewijzigd  en  met  de 
    volgende EG richtlijnen:  Conforme  al  modello  di  produzione  descritto  nel 
    certificato di approvazione de tipo CE e secondo le 
    richieste CE direttivo 2009/23/EC come modificato 
    e secondo le rechieste della seguente directive CE 
    Conforme al modello di producion descrito nel 
    certificado  di  aprobacion  del  tipo  CE  e  segun 
    los  requisitos  del  CE  diretiva  2009/23/EC 
    como  modificato  e  segun  los  requisitos  della 
    siguiente diretive CE 
    2006/95/EC  Laagspanning richtlijn  2006/95/EC  Strumenti  elettrici  per  uso  entro  certi  limiti  di 
    voltaggio  (  Directivo  di 
    voltaggio basso) 2006/95/EC  Instrumentos  electricos 
    para  uso  dentro  cierti 
    limites del voltaje 
     ( Diretivo di voltaje bajo ) 
    2004/108/EC  EMC richtlijn  2004/108/EC  Compatibilita 
    electromagnetico  2004/108/EC  Compatibilidad 
    electromagnetico 
    Deze  verklaring  is  alleen  geldig  samen  met 
    een  certificaat  van  overeenstemming  
    afgegeven door een bevoegde instantie.  Questa  dichiarazione  e  valida  solamente  se 
    accompagniato  da  un  certificato  di  conformita 
    relaciato da un ente riconosciuto.  Esta  declaracion  es  valida  solamente  si 
    accompagniato  a  un  certificado  da 
    conformidad  emitida  par  un  organismo 
    notificado. 
    Signature  
    Date 
    Unterschrift  Datum 
    Signature  Date 22 July 2011 
    Handtekening  Datum 
    Firma      Date 
    Firma  Fache 
    J.S. C\bmbach 
    Tech\fical Ma\fager    
    						
    All Adam Equipment manuals Comments (0)

    Related Manuals for Adam Equipment PTM Drum and Wheelchair Scale GKREVL1 User Manual