ADDER ePower Switch 8 Slave Manual
Here you can view all the pages of manual ADDER ePower Switch 8 Slave Manual. The ADDER manuals for Extender are available online for free. You can easily download all the documents as PDF.
Page 1
ePowerSwitch 8XS
User guide
Version 02 2011
www.neol.com
Page 2
Page 3
Page | 1 ePowerSwitch 8XS © Copyright by NEOL S.A.S - 4 Rue Nationale, 67800 BISCHHEIM, France Printed in France All rights reserved. No part of this documentation, accompanying software or other components of the described product may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose other than the personal use of the purchaser without the express written...
Page 4
Page | 2 User Guide CONTENTS SAFETY INSTRUCTIONS: To be read before use! ...................................................................................... 3 Consignes de sécurité : à lire avant utilisation ! ............................................................................................ 4 1. DESCRIPTION .......................................................................................................................................... 5 1.1. Package list...
Page 5
Page | 3 ePowerSwitch 8XS SAFETY INSTRUCTIONS: To be read before use! NOTE • The ePowerSwitch devices can only be installed by qualified people with the following installation and use instructions. The manufacturer disclaims all responsibility in case of a bad utilization of the ePowerSwitch devices and particularly any use with equipments that may cause personal injury or material damage. • This equipment is designed to be installed on a dedicated circuit that must have a circuit...
Page 6
Page | 4 User Guide Consignes de sécurité : à lire avant utilisation ! Remarque • Les équipements ePowerSwitch ne peuvent être installés que par un personnel qualifié. Le fabricant décline toute responsabilité en cas de mauvaise utilisation des équipements ePowerSwitch et tout particulièrement en cas d’utilisation avec des équipements pouvant occasionner des blessures corporelles ou des dommages matériels. • Les équipements ePowerSwitch sont destinés à être installés sur un ou...
Page 7
Page | 5 ePowerSwitch 8XS 1. DESCRIPTION ePowerSwitch 8XS is a power distribution and control unit that enables power management of 8 devices through an RS-232 or RS-485 connection. The ePowerSwitch 8XS has two separate power inputs of 10 Amp to increase the security and the load available on the power outlets. This device is intended to be connected to an ePowerSwitch Master or to the VizioGuard Environmental Monitoring Systems. Thanks to the RS232 and RS485 interfaces and its easy to...
Page 8
Page | 6 User Guide 3. Diagram 3.1. Front panel A B 1 2 3 4 5 6 7 8 (LEDs) A Green. Lights up when power applied on Group A B Green. Lights up when power applied on Group B 1 Red. Status of power outlet 1 (On/Off) 2 Red. Status of power outlet 2 (On/Off) 3 Red. Status of power outlet 3 (On/Off) 4 Red. Status of power outlet 4 (On/Off) 5 Red. Status of power outlet 5 (On/Off) 6 Red. Status of power outlet 6 (On/Off) 7 Red. Status of power outlet 7...
Page 9
Page | 7 ePowerSwitch 8XS 3.2. Back Power input B 230 VAC – 10 Amp Power outlets (Group B) Power outlets 5 – 8 230 VAC max 10 Amp Power outlets (Group A) Power outlets 1 – 4 230 VAC max 10 Amp Power input A 230 VAC – 10 Amp
Page 10
Page | 8 User Guide 4. Connection to a Master Make sure that all the ePowerSwitch devices are powered off. Connection Instructions 1. Connect the appropriate link-up cable to one of the xBus connector of the ePowerSwitch Master and to one of the xBus connector of the ePowerSwitch 8XS. To cascade several Satellites, link the second xBus connector of a Satellite with one of the xBus connector of the next Satellite. Master unit Link-up cable to the first satellite Link-up cable...