ADDER SmartView MultiScreen DVI Manual
Here you can view all the pages of manual ADDER SmartView MultiScreen DVI Manual. The ADDER manuals for Extender are available online for free. You can easily download all the documents as PDF.
Page 1
SmartView Multiscreen Serial Four-port.KVM.and.serial.switch SMARTVIEWMULTISCREEN
Page 2
SECT 1 Contents Welcome Introduction.........................................................................\�.........2 Serial.line.switching. ...........................................................2 Standard.items .........................................................................\�.....3 Additional.and.optional.items .....................................................4 Installation...
Page 3
PC4PC3PC3PC1PC2 4 3 2 1 SMARTVIEWMULTISCREEN SECT 2 Remote control allows the main unit to be neatly concealed away from view. Welcome Introduction The Adder SmartView Multiscreen Serial is a four-way KVM switch designed for systems using multiple touch screens. The unit allows a single keyboard, mouse and (up to) two video monitors to control four separate dual screen host systems. Switching between the systems connected to the Adder...
Page 4
A4 A3 A 2 A 1 A B 4 B3 B 2 B 1 B C 4 C3 C 2 C 1 C D 4 D3 D 2 D 1 D OPTIONS / FLASH OPTIONAL POWER INDOOR USE ONLY 5V1A Standard items Adder SmartView Multiscreen Serial model SVMS4-S A 4 A3 A 2 A 1 A B 4 B3 B 2 B 1 B C 4 C3 C 2 C 1 C D 4 D3 D 2 D 1 D OPTIONS / FLASH OPTIONAL POWER INDOOR USE ONLY 5V1A Adder SmartView Multiscreen Serial model SVMS4-DS One video input and one serial channel per port Two video inputs and two serial...
Page 5
4 Optional power supply (required only when long cables are used or for a slave unit in synchronised mode) plus country-specific mains cable Adder P/N: PSU-IEC-5VDC PS/-style keyboard/mouse cable, metres (two required per system) Adder P/N: VSC Additional and optional items CCPU converter (required when connecting to a system that uses a USB keyboard and mouse - two VSC cables are also required) Adder P/N:...
Page 6
5 Installation Locations Please consider the following important points when planning the positio\�n of the Adder SmartView Multiscreen Serial unit:• Situate the Adder unit close to the systems to which it will be connecte\�d. The Adder unit does not require a power supply providing that its connection cables are no longer than 2 metres. • Thanks to the remote control, the Adder unit can be situated out of sight behind a desk or adjacent...
Page 7
Making connections Connections to the Adder unit do not need to follow the precise order given in this user guide, although if one or more systems must be hot-plugged, connect these after all other connections have been made. System connections To make keyboard and mouse links (PS/-style connections) Note: Two Adder VSC3 link cables are required per connected system. 1 Ensure that the computer systems to be connected are...
Page 8
To make video links1 Ensure that the computer systems to be connected are switched off and that no power is applied to the Adder unit. (Note: If it is not possible to switch off systems prior to connection,\� then a ‘Hot plug’ procedure is available – see the Hot plugging and mouse restoration section for more details). 2 At the rear panel of the Adder unit, connect a video link cable to socket A of port 1. Ensure that the...
Page 9
Peripheral connections To connect a keyboard and mouse 1 At the rear panel of the Adder unit, attach the connector from the keyboard to the purple socket within the common section on the left side (closest to the power input socket). 2 Attach the connector from the mouse to the green socket within the common section on the left side (closest to the power input socket). To connect serial (touch screen) devices 1 At the rear...
Page 10
Remote control connections The remote control unit can be used to provide manual switching between systems. To connect the remote control 1 Locate the remote control unit and the remote control cable. Attach the smaller of the two cable connectors to the socket at the rear of the remote control. 1A 1B 1C OPTIONS / FLASH 2 At the other end of the cable, attach the larger connector to the OPTIONS/ FLASH socket on the right side of the...