Home > ADDER > Extender > ADDER SmartView MultiScreen Serial Manual

ADDER SmartView MultiScreen Serial Manual

Here you can view all the pages of manual ADDER SmartView MultiScreen Serial Manual. The ADDER manuals for Extender are available online for free. You can easily download all the documents as PDF.

Page 1

SmartView Multiscreen Serial
Four-port.KVM.and.serial.switch

SMARTVIEWMULTISCREEN 

Page 2








SECT 1
Contents
Welcome
Introduction.........................................................................\�.........2
Serial.line.switching.
...........................................................2
Standard.items
.........................................................................\�.....3
Additional.and.optional.items
.....................................................4
Installation...

Page 3








PC4PC3PC3PC1PC2
4
3
2
1
SMARTVIEWMULTISCREEN
SECT 2
Remote control allows the main unit to be neatly concealed away from view.
Welcome
Introduction
The Adder SmartView Multiscreen Serial is a four-way KVM switch 
designed for systems using multiple touch screens. The unit allows a 
single keyboard, mouse and (up to) two video monitors to control four 
separate dual screen host systems.
Switching between the systems connected to the Adder...

Page 4








A4
A3
A 2
A 1
A
B 4
B3
B 2
B 1
B
C 4
C3
C 2
C 1
C
D 4
D3
D 2
D 1
D
OPTIONS / FLASH
OPTIONAL
POWER
INDOOR
USE ONLY
5V1A
Standard items
Adder SmartView Multiscreen Serial model SVMS4-S
 
A 4
A3
A 2
A 1
A
B 4
B3
B 2
B 1
B
C 4
C3
C 2
C 1
C
D 4
D3
D 2
D 1
D
OPTIONS / FLASH
OPTIONAL
POWER
INDOOR
USE ONLY
5V1A
Adder SmartView Multiscreen Serial model SVMS4-DS
 
One video input and one serial channel per port
 
Two video inputs and two serial...

Page 5





4


Optional power supply (required only when long cables are used or for a slave unit in synchronised mode) plus country-specific mains cable
Adder P/N: PSU-IEC-5VDC
PS/-style keyboard/mouse cable,  metres 
(two required per system)
Adder P/N: VSC
Additional and optional items
CCPU converter (required when connecting to a system that uses a USB keyboard and mouse - two 
VSC cables are also required)  
Adder P/N:...

Page 6





5


Installation
Locations
Please consider the following important points when planning the positio\�n of 
the Adder SmartView Multiscreen Serial unit:•  Situate the Adder unit close to the systems to which it will be connecte\�d. 
The Adder unit does not require a power supply providing that its 
connection cables are no longer than 2 metres. 
•  Thanks to the remote control, the Adder unit can be situated out of sight 
behind a desk or adjacent...

Page 7








Making connections
Connections to the Adder unit do not need to follow the precise order given in 
this user guide, although if one or more systems must be hot-plugged, connect 
these after all other connections have been made.
System connections  
To make keyboard and mouse links (PS/-style connections)
Note: Two Adder VSC3 link cables are required per connected system.  
1  Ensure that the computer systems to be connected are...

Page 8








To make video links1  Ensure that the computer systems to be connected are switched off and that 
no power is applied to the Adder unit. 
  (Note: If it is not possible to switch off systems prior to connection,\� then 
a ‘Hot plug’ procedure is available – see the Hot plugging and mouse 
restoration section for more details). 
2  At the rear panel of the Adder unit, connect a video link cable to socket A of 
port 1. Ensure that the...

Page 9








Peripheral connections
To connect a keyboard and mouse  
1  At the rear panel of the Adder 
unit, attach the connector from 
the keyboard to the purple socket 
within the common section on 
the left side (closest to the power 
input socket).
2  Attach the connector from the 
mouse to the green socket within 
the common section on the left 
side (closest to the power input 
socket).
To connect serial (touch screen) devices
1  At the rear...

Page 10








Remote control connections
The remote control unit can be used to provide manual switching between 
systems. 
To connect the remote control
1  Locate the remote control unit and the remote control cable. Attach the 
smaller of the two cable connectors to the socket at the rear of the remote 
control.
1A
1B
1C
OPTIONS / FLASH
2 At the other end of the cable, attach the larger connector to the OPTIONS/
FLASH socket on the right side of the...
Start reading ADDER SmartView MultiScreen Serial Manual

Related Manuals for ADDER SmartView MultiScreen Serial Manual

All ADDER manuals