Home > ADDER > Extender > ADDERLink INFINITY Quick Start

ADDERLink INFINITY Quick Start

Add to Favourites
    Download as PDF

    View the ADDERLink INFINITY Quick Start for free. All the ADDER manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 AdderLink Infinity Quick Start Guide ALIF 1000 and 2000 (transmitter and receiver) - front panel indicators NETSERAUDUSB DVIPWR The six indicators on TX and RX units clearly show the key aspects of op\ eration: • NET On when valid network link is present. Flashes if there’s an error. • SER On when the serial port is enabled and active. • AUD On when audio is enabled and active. • USB On when USB is enabled and active. • DVI On when DVI video is enabled and active. • PWR Power indicator. ALIF1000...
    Page 2 Configuration • If ALIF TX and RX units are directly connected, no configuration action is required, provided that they have their factory default settings in place. If the standard settings have been changed in a previous installation, you merely need to perform a factory reset on each unit (see below). • Where ALIF units are connected via network links, you will need to specify their network address details. This can be done by connecting a computer system temporarily to each ALIF unit and...
    Page 3 Infinity browser-based configuration utility To use the browser-based configuration utility, link a computer via a network switch to the ALIF unit (Gigabit Ethernet is not essential for the configuration stage). This configuration utility allows you to perform all of the following functions: • View/edit the IP network address and netmask, • Configure separate IP network addresses for video, audio and USB, • Configure multicast settings (on RX units), • Configure video bandwidth settings (on TX...
    Page 4 RX (receiver) unit configuration In the ALIF system, the RX unit determines where and how data signals are sent (and received) by the TX unit. Although numerous ALIF topologies (one-to-one, one-to-many, many-to-one, etc.) are made possible, they are all dependent on two underlying modes of operation: either Unicast or Multicast transmission. Where multicast transmission is not invoked for video and/or audio data, operation will be automatically served by unicast network transmission technologies....
    Start reading ADDERLink INFINITY Quick Start

    Related Manuals for ADDERLink INFINITY Quick Start

    All ADDER manuals