Addonics Technologies Connector Converter adsssai44 User Manual

							 
ADDONICS TECHNOLOGIES 
Model: ADSSSAI44 
 
 
Installation Guide 
 
Front View 
 
 
 
  
 
  
 
 
 
 
 
 
Jumper Settings 
 
                      
Master               Slave             Cable Select 
 
Note: To set the slim ATAPI SATA drive as a Master 
Device when connected to an IDE channel, you 
need to short the top pins located on the converter 
by placing a jumper. As a Slave Device short the 
middle pins. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1. Locate the slim SATA ATAPI connector of your optical 
drive. 
 
 
 
2. Connect the converter board to the Slim SATA ATAPI 
connector of the optical drive. Secure the adapter using 
screws. 
  
 
3. (Optional) Connect the IDE ribbon cable to the 44-pin 
connector on the converter. The red edge of the ribbon 
cable needs to line up to pin 1 marker of the 44-pin 
connector. The other end of the ribbon cable will be 
connected to your motherboard’s 44-pin IDE channel. 
 
 
 
 
 
 
 
 
 
 
 
 
 
TECHNICAL SUPPORT 
 
 
Email:  http://www.addonics.com/sales/ 
Internet:  http://www.addonics.com 
 
Technical Support (8:30 am to 6:00 pm PST) 
Phone:     408 573-8580 
Email: http://www.addonics.com/support/ticketid/ 
44-pin IDE Connector 
Slim ATAPI SATA Power and  Data Connector 
Master, Slave & Cable Select Jumpers 
Pin 1 Marker 
44-pin IDE ribbon cable 
Screw hole 
Screw hole