Addonics Technologies Jupiter Cipher 1825 IDE Jupiter Cipher Ex Drive User Manual

							 
 
 
 
 
 
 
Addonics 
TE C HNO LO G IE S 
 
 
 
Jupiter Cipher ExDrive 
 
      For the following models: 
      JCEDIU64, JCEDIF64, JCEDIS64 
      JCEDIU128, JCEDIF128, JCEDIS128 
      JCEDIU192, JCEDIF192, JCEDIS192 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
User’s Guide 
Version 1.0  
						

							Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0 1
FCC Warning Statement 
 
This equipment has been tested and found to comply w ith the limi ts for a class 
B digital device pursuant to Part 15 of the FCC rules.  These limits are 
designed to provide  reasonable protection against har mful interference in a 
residential installation.  This equipment generates, uses and can radiate radio 
frequency energy.  If not installed and used in accordance with the in structions, 
it may cause harmful interference to radio communications.  Howe ver, there is 
no guarantee that interference will not occur in a particular installa tion.  If the 
equipment does cause harmful interference to radio or television reception, 
which can be determined by turning th e equipment on and off, the user is 
encouraged to try and corr ect the interference by o ne or more of the following 
suggestions. 
· Reorient or relocate the receiv ing antenna 
· Increase the distan ce between the equipment an d the receiver  
· Connect the equipment to a different powe r outlet other than the 
one where receiver is connected 
· Consult a certified television or radio technician 
 
LIMITED WARRANTY 
Addonics guaran tees that every product is free f rom physical defects in material 
and workmanship during the warranty period specifie d for each product when 
used within the limits set forth in th e Specifications section in the user guide. 
Unauthorized tamperin g of the product or using it outside the scope of  the 
product specifications will result in voiding th e warranty. If the product prove s 
defective during th is warranty period, call Addonics Tec hnical Support to 
obtain a Return Authorization number. BE SURE TO HAVE YOUR PROOF 
OF PURCHASE ON HAND WHEN CALLING. RETURN REQUESTS 
CANNOT BE PROCESSED WITHOUT PROOF OF PURCH ASE. When 
returning a product, mark the Return Authorization number clearly o n the 
outside of the package and i nclude your original proof of purchase. Customers 
are responsible fo r paying the shippin g and handling of the products to  
Addonics warranty service location. 
IN NO EVENT SHALL ADDONICS’ LIABILITY EXCEED THE PRICE 
PAID FOR THE PRODU CT FROM DIRECT, INDIRECT,  SPECIAL, 
INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM 
THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFTWARE, OR 
ITS DOCUMENTATION. Addonics makes no warranty or representation, 
expressed, implied, or statuary, with respect to its products or the contents or 
use of the user guide and all accompanying softw are, and specifically disc laims 
its quality, performance, merchant ability, or fitness for any particular pur pose. 
Addonics reserves the right t o revise or update its products, softw are, or 
documentation without obligation to notify any individual or entity. 
 
  
						

							Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0 2
Contents 
 
FCC Warning...................................................................................1 
Limited Warranty............................................................................1 
Contents............................................................................................2 
Chapter 1 General Information.........................................................3 
     Features............................................................................3 
     Jupiter Cipher Models......................................................4 
Chapter 2 Jupiter Cipher ExDrive key...............................................5 
Chapter 3 Keeping track of the hard drive.........................................6 
Chapter 4 Jumper Setting for Jupiter Cipher ExDrive.......................7 
Chapter 5 Hardware Installation Guide........................................8-10 
Chapter 6 Attaching USIB Interface Cable .....................................11 
Chapter 7 USB2.0 U SIB Interface Cable Driver Installa tion ......12-13 
                  Serial ATA USIB Interface Cable Driver Installation ....14 
     Firewire USIB Interface Cable Driver Installation .........15 
     How to use Disk Manag ement...................................16-17 
Technical Support & Contact Information................................…18 
 
  
						

							Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0 3
Chapter 1 
  
General Information 
 
The Addonics Technologies Jupiter Cipher ExDrive is a portable 2.5” Hard 
Disk Drive kit. The unit is external and uses the USB2.0, Firewire/iLink, and  
Serial ATA int erfaces. 
 
Features 
 
· Stylished and rugged black anodized aluminum housing  
· Compact size and light weight  
· Shock proof - up to 3 feet drop damage protection for the hard drive  
· Easy hard drive installation  
· Choice of s tandard or encr yption drive enclosure 
· The most versatile hard drive kit in the market  
· Connect as an Ext ernal Hard drive to any co mputer via USB2.0, CardBus, 
Firewire/iLink and Serial ATA port (only one of these cable s is included in  
· Turn any 2.5” hard drives into exte rnal hard dr ive or remov able hard drive 
· Use as a removable H ard Drive on Desktops PC w ith an optional  IDE drive 
cradle. 
· Plug & Play Operation under Windows 98SE, Me, 2000, XP and 2003 
Server 
· Portable: Fit s any Briefcase or Noteboo k PC Case. 
 
Encryption 
· Hardware based 64-bit DES and 128-bit or 192-bit TDES full disk 
encryption  
· High performance - Data is encrypted and decrypted on th e fly by a 
certified crypto graphic engine inside an  ASIC without taking any CPU 
resources  
· Encryption / Decryption via a har dware key, just like using a r egular key to 
open a door.  
· Simple to deploy  with no training required, no softw are to install and no 
password to remember  
· Platform independ ency - There is no software or dr iver to install  to use 
Addonics encryption products. As a result, i t can be deployed in any 
systems runnin g any OS. This is important in organization with multi 
platform computin g and legacy sy stems.  
 
 
 
  
						

							Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0 4
Jupiter Cipher ExDrive 
 
Item Number Product Description 
JCEDIU64 Jupiter Cipher ExDrive 64-bit for 2.5” IDE hdd, USB 2.0 
JCEDIF64 Jupiter Cipher ExDrive 64-bit for 2.5” IDE hdd, 
Firewire/iLink 
JCEDIS64 Jupiter Cipher ExDrive 64-bit for 2.5” IDE hdd, SATA 
JCEDIU128 Jupiter Cipher ExDrive 128-bit for 2.5” IDE hdd, USB 2.0 
JCEDIF128 Jupiter Cipher ExDri ve 128-bit for 2.5” IDE hdd, 
Firewire/iLink 
JCEDIS128 Jupiter Cipher ExDrive 128-bit for 2.5” IDE hdd,  SATA 
JCEDIU192 Jupiter Cipher ExDrive 192-bit for 2.5” IDE hdd, USB 2.0 
JCEDIF192 Jupiter Cipher ExDrive 192-bit for 2.5” IDE hdd, 
Firewire/iLink 
JCEDIS192 Jupiter Cipher ExDrive 192-bit for 2.5” IDE hdd,  SATA  
						

							Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0 5
Chapter 2  Jupiter Cipher ExDrive key 
 
Check to make sure you have the correct version of Jupiter Cipher ExDr ive key. 
The key should match the la bel at the bottom of the drive enclosure. 
 
IMPORTANT  
 
There is no back door for the Jupiter Cipher ExDrive encrypted hard drive if 
the key is lost or stolen.  
 
To ensure that there is a spare key, yo ur Jupiter Cipher ExDrive bundled kit 
comes with one pair of Jupiter Cipher ExDrive keys. These 2 keys have 
identical encryption code. One of these key s should be kept in a safe and secure 
location and can be sent back to Addonics for duplicatin g additional keys. If 
you are dow n to the last key, be sure to make a back up of  all the data stored 
inside your encrypted hard drive prior to sending t he last key to Addonics. 
Addonics is not responsible fo r key lost in the mail or retrieval of the data 
inside the encrypted hard drive. 
 
Ø The CIPHER key MUST be inserted at the front of the drive enclosure 
in order for the drive to be ACTIVATED. 
Ø Once the drive is INITIALIZED using the Ciph er Key that comes with 
the kit, the drive can only be  accessed by the ori ginal key. 
Ø The 2 keys that come w ith each Jupiter Cipher ExDrive bundled kit 
has their own unique encryption code.  So the key s among different 
kits are not interchangeable. 
 
If you have multipl e sets of Jupiter Ciph er ExDrive kits and would like all the 
keys to have the same encryption code, y ou may make this request at the time 
of your order or m ail the keys to gether with  master key back to Addonics to 
recode them for you. Again be sure th at you keep a spare key with you. Make a 
back up of your data if you are mailing i n your last key. 
 
 
 
 
 
 
 
Yellow label DES-64 stands 
for Jupiter Cipher ExDrive 
64-bit key 
 
 
 
Green label TDES-128 
stands for Jupiter 
Cipher ExDrive 128-
bit key 
 
 
 
Red label TDES-192 
stands for Jupiter 
Cipher ExDrive 192-
bit key  
						

							Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0 6
Chapter 3 Keeping track of the hard drive  
 
If you are usin g the Jupiter Cipher ExDrive drive enclosure to encrypt multiple 
hard drives, it is important t o label your hard drive if y ou are taking th e drive 
out of the enclosure.  The hard drive with Jupiter Cipher ExDrive encryption 
will look like a brand new drive when attach dir ectly to the IDE or SATA 
controller of a co mputer. There will be no  partition or any hint to indicate tha t 
the drive contains encrypted data.  When the drive is partitioned, all the 
encrypted data will be lost.  
 
The same holds true if a hard drive already has data on it is installed into the 
Jupiter Cipher ExDrive drive enclosure. The computer detects the hard drive as 
a brand new drive or a drive that is un allocated. Once you proceed to partition 
the drive, the data th at was on the hard dr ive will be erased and cannot be 
recovered. 
 
A Jupiter Cipher ExDrive encrypted hard dr ive can be moved to another Jupiter 
Cipher ExDrive drive enclosure. But the same key  used in encrypting the h ard 
drive must be used in the new drive enclosure in order to access the drive. 
 
If you are installing multiple Jupiter Cipher ExDrive drive kits into a large 
organization, it is important to keep track of the drive and the encryption 
key. Once it gets mixed up, there is no possible way to recover the data on 
the encrypted hard drive. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  
						

							Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0 7
Chapter 4 
Jumper settings inside the Jupiter Cipher ExDrive Drive Case 
 
A. If the Jupiter Cipher ExDrive will be used e xternally with the external AC 
adapter, t he switch from the case must be  switch to the right, labeled EXT 
to grab power from external  power supply. 
 Application: Jupiter Cipher ExDrive can be set to receive  power EXT and be 
used with all three types of USIB cables. 
 
B. If the Jupiter Cipher ExDrive will be used externally without the external 
AC adapter, the switch from the case must be switch to the left, labeled 
INT to grab power from sy stem. 
 Application: Jupiter Cipher ExDrive can be set to receive power INT and be 
used with the following  t ypes of USIB cables: USB2.0 USIB & F irewire USIB 
 
Note: We recommend setting the hard dr ive to MASTER mode/setting at all 
times. (Default setting) 
                         J4 Pin Definition for Master Setting 
 
 
     J1 Pin Definition for USIB Interface 
 
 
 
 
Hard Drive Brand Master Setting 
Hitachi 
NEC 
Fujitsu 
Toshiba 
Pin 1~6 Open 
Seagate Pin 3 - Pin 4 Short 
Hard Drive Setting J1 Jumper Setting 
Master Pin 3 - Pin 5 Short  
						

							Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0 8
Chapter 5  
Hardware Installation Guide 
 
Exploded View of Enclosure shown with various components 
  
						

							Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0 9
 
Step 2 
Align the male IDE connecto r on the 
2.5” hard drive with the female IDE 
connector on the PCB. Pus h the hard 
drive till the connector pins on the hard 
drive is fully seated inside the 
connector on the PCB.  
 
 
 
 
Step 3 
Wrap the shock absorber around the 
hard dr ive and PCB. 
 
 
 
 
 
 
 
Step 4 
Turn over the PCB and sec ure the 
hard drive to the PCB w ith the 
mounting screws that come with the 
kit. 
 
 
 
 
 
 
Step 5 
Mount th e board to the bottom cov er.