Home > Addonics Technologies > Raid Tower > Addonics Technologies RAID Tower III RT3S5HEU3 user guide

Addonics Technologies RAID Tower III RT3S5HEU3 user guide

Add to Favourites
    Download as PDF

    View the Addonics Technologies RAID Tower III RT3S5HEU3 user guide for free. All the Addonics Technologies manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 T E C H N O L O G I E S User Guide RAID Tower III (RT3S5HEU3) Technical Support If you need any assistance to get your unit functioning properly, please have your product information ready and contact Addonics Technical Support at: Hours: 8:30 am - 6:00 pm PST Phone: 408-453-6212 Email: http://www.addonics.com/support/query/ v8.1.11 www.addonics.com
    Page 2 www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ Installing drives into the RAID Tower III 1. Be sure the lock on each drive door is in an unlock position. If not, use the key that comes with the Disk Array to unlock the drive door. Pull on the door lever to swing open the drive door all the way. 2. Slide a 3.5” SATA hard drive into the drive slot with the drive connector side facing in. Be sure to orient the hard drive...
    Page 3 www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ Dip Switch Settings Enable ERR Buzzer FunctionAuto- Rebuilding to Spare Drive Port Multiplier Mode Raid Mode 1 2 3 4 5 Individual Drive(Factory Default)OFF OFF OFF OFF OFF OFF OFFOFF ON ON ON OFF OFF ON OFF OFF OFF OFF OFF OFF OFF OFF ON ON OFF ON ON OFF OFF ON OFF OFF OFF ON ON 0 1 and 10 3 5 Clone Large RAID Setting Button Dip Switch...
    Page 4 www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ Default factory DIP Switch setting: SW1 – RAID Setting DIP Switch BZS – Error buzzer function EZ – Automatic rebuilding to spare drive (one of the drives on the raid is s\ et as a spare). If EZ is ENABLED anda drive failure occurs, the spare will automatically act as a drive replacement and rebuilding will automatical\ ly start. M2 – RAID mode 2 M1 – RAID...
    Start reading Addonics Technologies RAID Tower III RT3S5HEU3 user guide

    Related Manuals for Addonics Technologies RAID Tower III RT3S5HEU3 user guide

    All Addonics Technologies manuals