Home
>
Addonics Technologies
>
USB 3.1 or 3.11
>
Addonics Technologies USB 31 or 311 REDESPREDESPU3 user guide
Addonics Technologies USB 31 or 311 REDESPREDESPU3 user guide
Have a look at the manual Addonics Technologies USB 31 or 311 REDESPREDESPU3 user guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 299 Addonics Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 2
Step 5
Mount the board to the bottom cover.
Step 7
Lower the front of the top cover and making sure the two covers lined up\
properly. Tighten the small retaining screw on the front of the bottom cover to
close the enclosure.
Bottom Cover
Universal eSATAp Cable
Universal eSATAp Cable
eSATAp to USB 3.0 Adapter
(REDESPU3 Only)
Step 6
Put the top cover on by holding it in
near vertical position and sliding the
two metal clips inside the two small
slots on the rear of the bottom cover.
Hybrid eSATA...](http://img.usermanuals.tech/thumb/181/2604/w64_usb-31-or-311-redespredespu3-user-guide-1478575381_d-1.png "Page 2
Step 5
Mount the board to the bottom cover.
Step 7
Lower the front of the top cover and making sure the two covers lined up\
properly. Tighten the small retaining screw on the front of the bottom cover to
close the enclosure.
Bottom Cover
Universal eSATAp Cable
Universal eSATAp Cable
eSATAp to USB 3.0 Adapter
(REDESPU3 Only)
Step 6
Put the top cover on by holding it in
near vertical position and sliding the
two metal clips inside the two small
slots on the rear of the bottom cover.
Hybrid eSATA...")
T E C H N O L O G I E S User Guide Ruby eSATAp ExDrive (REDESP, REDESPU3) Installing your HD to theRuby eSATAp ExDrive Step 1 Separate the top from the bottom cover of the drive enclosure by loosening the screw. Step 3 Wrap the shock absorbers around the hard drive and PCB. Switch SATA Connector PCB Shock Absorbers HDStep 2 Align the SATA connector in the 2.5” hard drive with the SATA connector on the PCB. Step 4 Turn over the PCB and secure the hard drive to the PCB with the mounting screws that come with the kit. Bottom of PCB Technical Support If you need any assistance to get your unit functioning properly, please have your product information ready and contact Addonics Technical Support at: Hours: 8:30 am - 6:00 pm PST Phone: 408-453-6212 Email: http://www.addonics.com/support/query/ v3.1.11 www.addonics.com
Step 5 Mount the board to the bottom cover. Step 7 Lower the front of the top cover and making sure the two covers lined up\ properly. Tighten the small retaining screw on the front of the bottom cover to close the enclosure. Bottom Cover Universal eSATAp Cable Universal eSATAp Cable eSATAp to USB 3.0 Adapter (REDESPU3 Only) Step 6 Put the top cover on by holding it in near vertical position and sliding the two metal clips inside the two small slots on the rear of the bottom cover. Hybrid eSATA Port(eSATAp) USB 3.0/2.0 Port Connecting the Ruby Enclosure to Your Computer or