ADT Security Services OC810ADT Wireless Outdoor DayNight Camera Installation Guide

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
ADT Pulse®  Interactive Solutions  
OC810- ADT Wireless  
Outdoor Day/Night Camera  
Installation Guide  
 
    

OC810-ADT Wireless Outdoor Day/Night Camera Installation Guide 
 
Table of Contents 
INTRODUCTION  ...........................................................................................................  1 
Overview .......................................................................................................................  1 
OC810-ADT Camera Features  ..........................................................................  1 
Package Contents...

OC810-ADT Wireless Outdoor Day/Night Camera Installation Guide 
 
Introduction 
This section  provides details of the OC810- ADT Wireless Outdoor Day/Night 
Camera features, components and capabilities.  
 
Overview  
The OC810 -ADT Wireless Outdoor Day/Night Camera (hereafter referred to as 
the  wireless camera ) has an Integrated Microcomputer and a high  quality digital 
Image Sensor, enabling it to display high quality, live streaming video to your 
web or mobile client over an 802.11n Wireless LAN....

OC810-ADT Wireless Outdoor Day/Night Camera Installation Guide 
  
Package Contents  
1. OC810- ADT Wireless Outdoor Day/Night Camera  
2. Antenna   
3. Power Adapter  
4. Ethernet Cable  
5. Power Extension Cable (with water sealing cap)  
6. Stand  
7. Mounting Screws   
8. Quick  Installation Guide  
 
 
 
2  ADT Pulse® Interactive Solutions 
  

OC810-ADT Wireless Outdoor Day/Night Camera Installation Guide 
  
Physical Details – OC810- ADT Camera   
  
Front Panel   
   
Figure 1: Front Panel 
1. Lens No physical adjustment is required or possible for the 
lens, but you should ensure that the lens cover remains 
clean. Image quality is degraded if the lens cover is dirty 
or smudged.  
2. Power LED On - Power on. 
Off -  Power off.  
Blinking  -  The Power LED blinks during power up. (This 
can take up to 20 seconds ). 
3. Light Sensor The...

OC810-ADT Wireless Outdoor Day/Night Camera Installation Guide 
  
Rear Panel   
 
Figure 2: Rear Panel 
1. Antenna  The antenna is adjustable with best results typically 
obtained with the antenna positioned vertically .  
2. Power Port  The supplied 12V power adapter plugs power to the 
wireless camera’s  power port .  
IMPORTANT 
 DO NOT USE ANY POWER ADAPTER OTHER THAN 
THE ONE SPECIFIED FOR THIS CAMERA. DOING SO 
MAY DAMAGE THE WIRELESS CAMERA.  
3. Ethernet Port   The Ethernet port enables...

OC810-ADT Wireless Outdoor Day/Night Camera Installation Guide 
 
Installation 
This section  provides details of installing and configuring the OC810- ADT 
Wireless Outdoor Day/Night Camera.   
 
Adding the OC810-ADT Wireless Outdoor Day/Night 
Camera to the ADT Security System   
 
 
NOTE:  The OC810
-ADT wireless camera  can only be added to a Pulse 
system that supports video . 
 
1. Open your web browser. In the address bar, type:  
https://Portal.ADTPulse.com. 
2.  Type your Username  and...

OC810-ADT Wireless Outdoor Day/Night Camera Installation Guide 
 
4. In the Manage Devices Assistant , click Cameras. 
 
 
5.  Click the picture of the OC810  or select it from the drop- down list, and then 
click the Continue  button.   
 
 
6.  Assign the wireless c amera a unique name (this is usually based on the 
location of the wireless c amera) in the space provided, and  then type the 
wireless c amera’s MAC ID  or Server Name.  
6  ADT Pulse® Interactive Solutions 
  

OC810-ADT Wireless Outdoor Day/Night Camera Installation Guide 
 
7. Click the Continue  button.  
 
8. Attach the antenna to the wireless camera.  To adjust the antenna, screw to 
the rear mounting point and set the antenna to the upright position to 
improve wireless reception . 
9.  Connect the wireless camera  to the Device Port of the gateway using a 
standard LAN  cable.  
10. Connect the supplied 12V power adapter to power up the wireless camera, 
and then click the Continue  button . 
 
 
NOTE...

OC810-ADT Wireless Outdoor Day/Night Camera Installation Guide 
 
11. Once connected,  click the Continue  button . 
 
 
12.  Click  the Finish  button. The  installation is complete.  
 
 
13.  Disconnect the wireless camera  from the gateway and remove from power.   
14.  Assemble  the mounting bracket, and then  install the wireless  camera in the 
final location.  
15.  Re -apply power.  
If the camera does not connect, use of the ADT Wi -Fi extender, part # 
WN2RPADT -1ADNAS is recommended and may...