ADT Security Services Safewatch Pro 2000 User Manual

– 11 –
FUNCTIONS OF THE TOUCHPADS
1.DISPLAY WINDOW.
Custom English Display Touchpads:
 These 2-line, 32-
character Liquid Crystal Display (LCD) touchpads display
protection point identification, system status, and messages.
English Display Touchpads:
  Display protection zone
ID and system status messages using pre-designated words.
2.
   1    
  
OFF KEY: Disarms burglary portion of the system,  silences alarms and audible trouble indicators, and  clears visual display after problems correction.
3....

– 12 –
ARMEDREADY
6BYPASS
7INSTANT1OFFAWAY
STAY
23
4TEST
CODE
CHIME
READY
9
85
# 0
AC
DB
1
4
3
2
175
18
8
1115
14
16
6
7
9
10
12
13
English Display Touchpad
ARMED
READY
6BYPASS
7INSTANT1OFFAWAY
STAY
23
4TEST
CODE
CHIME
READY
9
85
# 0
AC
DB
KEYPAD SHOWN WITHOUT SWING-DOWN FRONT DOOR
1
4
3
2
175
18
8
1115
14
16
6
7
9
10
12
13Custom English Display Touchpad
(Touchpads shown without swing-down front door)
IMPORTANT!
•When entering codes and commands, sequential key depressions must be made
within 10 seconds...

– 13 –
CHECKING FOR OPEN ZONES
Using the
 
 Q
   READY Key
Before arming your system, all protected doors, windows and other protection zones
must be closed or bypassed (see 
BYPASSING
 PROTECTION
 ZONES
 section), otherwise
the touchpad will display a Not Ready message, and the READY indicator light on your
touchpad will not be lit. The READY key can be used to display all faulted zones, making it
easier for you to secure any open zone.
To display faulted zones, simply press and release the READY [
Q]...

– 14 –
ARMING PERIMETER ONLY 
(With Entry Delay ON)
Using the
 
 3 
  STAY Key
BEFORE ARMING,close all doors and windows(see 
CHECKING
 FOR
 OPEN
ZONES
 ).
 THE STAY MODE ARMS THE PERIMETER, BUT ALLOWS USE OF THE ENTRY/EXIT DOOR. PERSONS WITHIN THE PREMISES CAN MOVE ABOUT FREELY. †
Ask your installer if this
feature is programmed in
your system. If so, place a
check in this box.   
    
Use this key when  staying inside, but expect someone to use an entry/exit door later. It is
also useful if you are...

– 15 –
ARMING PERIMETER ONLY 
(With Entry Delay OFF)
Using the
 7 
  INSTANT Key
BEFORE ARMING,close all doors and windows(see 
CHECKING
 FOR
 OPEN
ZONES
 )
THE INSTANT MODEARMS THE PERIMETER(INCLUDING ENTRY/EXITDOOR), WITH NO ENTRYDELAY. PERSONS WITHINTHE PREMISES CAN MOVEABOUT FREELY†
Ask your installer if this
feature is programmed in
your system. If so, place a
check in this box.   
    
Use this key when staying inside and do not expect anyone to use an entry/exit door.
CAUTION:Arming the system in...

– 16 –
ARMING ALL PROTECTION 
(With Entry Delay ON)
Using the
 
 2 
  AWAY Key
BEFORE ARMING,close all doors and windows(see 
CHECKING
 FOR
 OPEN
ZONES
 )
Use this key when no one will be staying inside.
1 . Enter your security code and press the AWAY [2] key. In some systems, pressing
the “A” key on the touchpad for 2 seconds will arm the system AWAY (no code is
required). The “A” key may or may not have been programmed for this. Check with
your installer.
2 . The touchpad begins beeping and displays...

– 17 –
DISARMING AND SILENCING ALARMS
Using the
 
 1 
  OFF Key
IMPORTANT:
If you return and themain burglary sounderis on, DO NOT ENTER, butCONTACT THE POLICE froma nearby safe location.If you return after an alarmhas occurred and the mainsounder has shut itself off,the touchpad will beeprapidly upon yourentering, indicating thatan alarm has occurredduring your absence.LEAVE IMMEDIATELY, andCONTACT THE POLICE from anearby safe location.
The OFF key is used to disarm the system, silence alarm and trouble...

– 18 –
BYPASSING PROTECTION ZONESUsing the
 
 6 
  BYPASS Key
LIMITATION
The system will not allowfire zones to be by-passed.All bypasses are removedwhen an OFF sequence(security code plus OFF)is performed.
This key is used when you want to arm your system with one or more zones intentionally
unprotected. The system must be disarmed first.
1 . Enter your security code and press the BYPASS [6] key.
2 . Enter the zone number(s) for the zone(s) to be bypassed (e.g., 06, 10, 13, etc.).
Single digit zone...

– 19 –
BYPASSING PROTECTION ZONES
 (Continued)
Quick Bypass
Ask your installer ifQuick Bypass is activefor your system, and ifso, check here:  
   
If your system supports Quick Bypass, it allows you to easily bypass all open (faulted)
zones without having to enter zone numbers individually. This feature is useful if, for
example, you routinely leave certain windows open when arming at night.
To use this feature, enter your security code and, within 10 seconds, press the BYPASS
[6] key, then stop. In a...

– 20 
–
CHIME MODE
Using the
 
 9 
  CHIME Key
This feature can be usedonly while the burglarysystem is disarmed.
Your system can be set to alert you to the opening of a perimeter door or window while it is
disarmed by using CHIME mode.
When activated, three tones will sound at the touchpad whenever a perimeter door or
window is opened.  Interior zones will not produce a tone when they are activated.
Pressing the READY key will display the open protection points.
To turn Chime Mode on:
Enter the security...