AEG Freestanding refrigerator S63300KDX0 User Manual

The operation of the appliance
goes with certain sounds (com-
pressor and circulating sound).
This not means a trouble, but a
normal operation.The appliance operates discon-
tinuously, so the stopping of
compressor does not mean be-
ing no current. That is why you
must not touch the electrical
parts of the appliance before
breaking the circuit.
ProblemPossible causeSolution
The appliance is
noisy.The appliance is not sup-
ported properly.Check if the appliance
stands stable (all feet and
wheels should be...

ProblemPossible causeSolution
Water flows on the
ground.The melting water outlet
does not flow in the evap-
orative tray above the
compressor.Attach the melting water
outlet to the evaporative
tray.
The temperature in
the appliance is too
cold.The Temperature regula-
tor may be set incorrectly.Set a warmer temperature.
The temperature in
the appliance is too
warm.The Temperature regula-
tor may be set incorrectly.Set a lower temperature.
 The door is not closed
correctly.Refer to "Closing the...

3.If necessary, replace the defective
door gaskets. Contact the Service
Center.
8. INSTALLATION
WARNING!
Read the "Safety Information"
carefully for your safety and cor-
rect operation of the appliance
before installing the appliance.
8.1 Positioning
Install this appliance at a location where
the ambient temperature corresponds to
the climate class indicated on the rating
plate of the appliance:
Cli-
mate
classAmbient temperature
SN+10°C to + 32°C
N+16°C to + 32°C
ST+16°C to + 38°C
T+16°C to +...

8.3 Rear spacers
2
431You can find the two spacers in the bag
with documentation.
Do these steps to install the spacers:
1.Release the screw.
2.Engage the spacer below the screw.
3.Turn the spacer to the right position.
4.Tighten again the screws.
8.4 Electrical Connection
CAUTION!
Any electrical work required to
install this appliance should be
carried out by a qualified electri-
cian or competent person.
WARNING!
This appliance must be earthed.
The manufacturer declines any li-
ability should these...

8.5 Levelling
Accurate levelling prevents the vibration
and noise of the appliance during opera-
tion. To adjust the height of the appli-
ance loosen or tighten the two adjusta-
ble front feet.
8.6 Door reversibility
1 2
3
8 6
7
To carry out the following opera-
tions, we suggest that this be
made with another person that
will keep a firm hold on the doors
of the appliance during the oper-
ations.
To change the opening direction of the
door, do these steps:
• Remove the plug from the power
socket.
• Tilt...

1
23
6
5
4
• Remove the handle. Unscrew the top
handle bracket from the handle rod
(1). Unscrew the bottom handle brack-
et from the door (2)
• Unscrew the top handle bracket from
the door (3).
• Re-screw the handle bracket on the
door (4). Turn the handle bracket with
the handle and screw them to the
door (5) and the fitted handle bracket
(6)
• Re-insert the door on the lower hinge
pivot .
• Re-insert the door on the upper hinge
pivot slightly tilting the door.
• Screw the lower hinges.
• Stand the...

CLICK!CLICK!
BRRR!
BRRR!
BLUBB!BLUBB!
HISSS!
HISSS!
ENGLISH17 

SSSRRR!SSSRRR!
CRACK!
CRACK!
10. TECHNICAL DATA
   
Dimension  
 Height1540 mm
 Width595 mm
 Depth658 mm
Voltage 230 - 240 V
Frequency 50 Hz
The technical information are situated in
the rating plate on the internal left side
of the appliance and in the energy label.
11. ENVIRONMENT CONCERNS
Recycle the materials with the
symbol  . Put the packaging in
applicable containers to recycle it.
Help protect the environment and
human health and to recycle waste
of electrical and electronicappliances. Do not...

ENGLISH19 

www.aeg.com/shop
280150568-A-012012