AEG Freestanding refrigerator S73320KDW0 User Manual

							ENUser ManualRefrigeratorS73320KDW0S73320KDX0    
						

							CONTENTS
1. SAFETY INFORMATION.................................................................................................3
2.  SAFETY INSTRUCTIONS................................................................................................ 4
3.  CONTROL PANEL........................................................................................................... 5
4.  DAILY USE.......................................................................................................................\
.7
5.  CARE AND CLEANING.................................................................................................. 7
6.  TROUBLESHOOTING..................................................................................................... 8
7.  INSTALLATION............................................................................................................... 9
8.  TECHNICAL DATA........................................................................................................ 10
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you impeccable
performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes
reading to get the very best from it. Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.aeg.com/webselfserviceRegister your product for better service:
www.registeraeg.comBuy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shopCUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the following
data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
 Warning / Caution-Safety information
 General information and tips
 Environmental information
Subject to change without notice.
www.aeg.com2       
						

							1.  SAFETY INFORMATION
Before the installation and use of the appliance,carefully read the supplied instructions. The manufacturer is not responsible for any injuries ordamages that are the result of incorrect installation or
usage. Always keep the instructions in a safe and
accessible location for future reference.
1.1  Children and vulnerable people safety
•This appliance can be used by children aged 8 years
and above and by persons with reduced capabilities
provided that they have been given instruction and/or
supervision regarding the safe use of the appliance and understand the potential hazards involved.
• Do not let children play with the appliance.
• Children shall not carry out cleaning and user
maintenance of the appliance without supervision.
• Keep all packaging away from children and dispose of
it appropriately.
1.2  General Safety
•
This appliance is intended to be used in household
and similar applications such as: – Farm houses; staff kitchen areas in shops, offices
and other working environments
– By clients in hotels, motels, bed and breakfast and
other residential type environments
• Keep ventilation openings, in the appliance enclosure
or in the built-in structure, clear of obstruction.
• Do not use mechanical devices or other means to
accelerate the defrosting process, other than thoserecommended by the manufacturer.
• Do not damage the refrigerant circuit.
• Do not use electrical appliances inside the food
storage compartments of the appliance, unless they
are of the type recommended by the manufacturer.
ENGLISH3  
						

							•Do not use water spray and steam to clean the
appliance.
• Clean the appliance with a moist soft cloth. Only use
neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects.
• Do not store explosive substances such as aerosol
cans with a flammable propellant in this appliance.
• If the supply cord is damaged, it must be replaced by
the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard.2.  SAFETY INSTRUCTIONS2.1  InstallationWARNING!
Only a qualified person must
install this appliance.
• Remove all the packaging and the
transit bolts.
• Do not install or use a damaged appliance.
• Follow the installation instruction supplied with the appliance.
• Always take care when moving the appliance as it is heavy. Always use
safety gloves and enclosed footwear.
• Make sure the air can circulate around the appliance.
• Wait at least 4 hours before connecting the appliance to the
power supply. This is to allow the oil
to flow back in the compressor.
• Do not install the appliance close to radiators or cookers, oven or hobs.
• The rear of the appliance must stand against the wall.
• Do not install the appliance where there is direct sunlight.
• Do not install this appliance in areas that are too humid or too colds, such
as the construction appendices,
garages or wine cellars.
• When you move the appliance, lift it by the front edge to avoid scratching
the floor.
2.2  Electrical connectionWARNING!
Risk of fire and electrical
shock.
• The appliance must be earthed.
• Make sure that the electrical information on the rating plate agreeswith the power supply. If not, contact
an electrician.
• Always use a correctly installed shockproof socket.
• Do not use multi-plug adapters and
extension cables.
• Make sure not to cause damage to the electrical components (e.g. mainsplug, mains cable, compressor).
Contact the Authorised Service
Centre or an electrician to change the electrical components.
• The mains cable must stay below the level of the mains plug.
• Connect the mains plug to the mains socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
• Do not pull the mains cable to disconnect the appliance. Always pull
the mains plug.
2.3  UseWARNING!
Risk of injury, burns,
electrical shock or fire.www.aeg.com4    
						

							• Do not change the specification ofthis appliance.
• Do not put electrical appliances (e.g. ice cream makers) in the applianceunless they are stated applicable bythe manufacturer.
• Be careful not to cause damage to the refrigerant circuit. It contains
isobutane (R600a), a natural gas with a
high level of environmental
compatibility. This gas is flammable.
• If damage occurs to the refrigerant circuit, make sure that there are no
flames and sources of ignition in the
room. Ventilate the room.
• Do not let hot items to touch the plastic parts of the appliance.
• Do not store flammable gas and liquid in the appliance.
• Do not put flammable products or items that are wet with flammableproducts in, near or on the appliance.
• Do not touch the compressor or the condenser. They are hot.2.4  Care and cleaningWARNING!
Risk of injury or damage to
the appliance.
• Before maintenance, deactivate the appliance and disconnect the mainsplug from the mains socket.
• This appliance contains hydrocarbons
in the cooling unit. Only a qualified
person must do the maintenance and
the recharging of the unit.
• Regularly examine the drain of the appliance and if necessary, clean it. If
the drain is blocked, defrosted water collects in the bottom of the
appliance.2.5  DisposalWARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the mains supply.
• Cut off the mains cable and discard it.
• Remove the door to prevent children and pets to be closed inside of the
appliance.
• The refrigerant circuit and the insulation materials of this appliance
are ozone-friendly.
• The insulation foam contains flammable gas. Contact your
municipal authority for information on
how to discard the appliance
correctly.
• Do not cause damage to the part of the cooling unit that is near the heatexchanger.
3.  CONTROL PANEL1ECO mode icon2
Temperature key
3
Temperature scale
4
COOLMATIC icon
3.1  Switching on
1. Plug the appliance into electrical
mains socket.
2. To turn on the appliance, touch the
temperature key until all LED
indicators light up.After approximately 3
seconds LED indicators fade
and the temperature is set
to the default setting (ECO
mode). Only the
temperature key and LED
indicator next to ECO mode
icon illuminate.ENGLISH5  21
34   
						

							3.2 Switching off
1. To switch off the appliance press the
temperature key for 3 seconds.
All LED indicators turn off.
2. To disconnect the appliance from the
electrical supply, remove the mains
plug from the power socket.3.3  Temperature regulation
To regulate the temperature, press the
temperature key. Every time the key is
pressed, the set temperature moves by 1
position and corresponding LED
indicator lights up. Press the temperature
key repeatedly until the required
temperature is selected. The setting will
be fixed.
Selection is progressive,
varying from +2°C to +8°C.
Coldest setting: +2°C.
Warmest setting: +8°C
Most suitable setting: ECO
mode (+3 to +4°C).
Choose the setting keeping in mind that
the temperature inside the appliance
depends on: • room temperature
• frequency of opening the door • quantity of food stored
• appliance location.
3.4  Sleep mode of the display
After 30 seconds of no interaction with
the appliance, the display goes into the
sleep mode. Only LED indicator
corresponding to currently set
temperature illuminates in low light. All
other LED indicators are off. To
deactivate this mode press the
temperature key.
3.5  ECO mode
In this mode the temperature is set
between +3 and +4°C.
This is the best temperature
to ensure good food
preservation with minimal
energy consumption.To activate ECO mode press the
temperature key repeatedly until LED
indicator next to ECO mode icon lights
up.3.6  COOLMATIC function
If you need to insert a large amount of
warm food, for example after doing the
grocery shopping, we suggest activating
COOLMATIC function to cool the
products more rapidly and to avoid warming food already stored in thefridge compartment.
To activate this function press the
temperature key repeatedly until the LED
indicator next to COOLMATIC icon lights
up. Also LED indicator corresponding to
+2°C illuminates.
This function stops
automatically after 6 hours.
When the function
deactivates, the previous
temperature setting is
restored.You can deactivate this
function at any time by
pressing the temperature
key and choosing a new
temperature setting.When COOLMATIC function
is switched on, the fan in the
fridge compartment is also
activated.3.7  Door open indicator
If the door has been left open for
approximately 5 minutes, the door open
indicator activates. The temperature key
and LED indicator of the currently set
temperature flash.
You can deactivate this
indicator by closing the door
or by pressing the
temperature key.www.aeg.com6       
						

							4. DAILY USEWARNING!
Refer to Safety chapters.4.1  DYNAMICAIR
The refrigerator compartment is
equipped with a device that allows rapid
cooling of food and keeps a more
uniform temperature in the
compartment.
The fan operates only when the door is closed.
This device activates automatically when needed, for example when the
temperature inside the appliance is high.
It is possible to activate the devicemanually by switching on COOLMATIC
function. The fan will operate together with this function for 6 hours.5.  CARE AND CLEANINGWARNING!
Refer to Safety chapters.5.1  Cleaning the interior
Before using the appliance for the first
time, the interior and all internal
accessories should be washed with
lukewarm water and some neutral soap
to remove the typical smell of a brand- new product, then dried thoroughly.
CAUTION!
Do not use detergents,
abrasive powders, chlorine
or oil-based cleaners as they
will damage the finish.5.2  Periodic cleaningCAUTION!
Do not pull, move or damage any pipes and/or
cables inside the cabinet.CAUTION!
Take care of not to damage
the cooling system.CAUTION!
When moving the cabinet,
lift it by the front edge to
avoid scratching the floor.
The equipment has to be cleaned
regularly:
1. Clean the inside and accessories with
lukewarm water and some neutral
soap.
2. Regularly check the door seals and
wipe clean to ensure they are clean
and free from debris.
3. Rinse and dry thoroughly.
4. If accessible, clean the condenser
and the compressor at the back of
the appliance with a brush.
This operation will improve the
performance of the appliance and save electricity consumption.5.3  Defrosting of the
refrigerator
Frost is automatically eliminated from the
evaporator of the refrigerator
compartment every time the motor compressor stops, during normal use.
The defrost water drains out through a trough into a special container at the
back of the appliance, over the motor
compressor, where it evaporates.
It is important to periodically clean the
defrost water drain hole in the middle of the refrigerator compartment channel to
prevent the water overflowing and
dripping onto the food inside.
ENGLISH7        
						

							5.4 Periods of non-operation
When the appliance is not in use for long
periods, take the following precautions:
1. Disconnect the appliance from
electricity supply.2. Remove all food.
3. Clean the appliance and all
accessories.
4. Leave the door/doors open to
prevent unpleasant smells.6.  TROUBLESHOOTINGWARNING!
Refer to Safety chapters.6.1  What to do if...ProblemPossible causeSolutionThe appliance is noisy.The appliance is not sup-
ported properly.Check if the appliance stands
stable.Audible or visual alarm is
on.The cabinet has been re-
cently switched on or the
temperature is still too
high.Refer to "Door Open
Alarm"or "High Temperature
Alarm".The temperature in the ap-
pliance is too high.Refer to "Door Open
Alarm"or "High Temperature
Alarm".The lamp does not work.The lamp is in stand-by.Close and open the door.The lamp does not work.The lamp is defective.Contact the nearest Author-
ised Service Centre.The compressor operates
continually.Temperature is set incor-
rectly.Refer to "Operation" chapter. Many food products were
put in at the same time.Wait some hours and then
check the temperature again. The room temperature is
too high.Refer to climate class chart on
the rating plate. Food products placed in
the appliance were too
warm.Allow food products to cool to
room temperature before stor-
ing.The COOLMATIC function
is switched on.Refer to "COOLMATIC func-
tion".The compressor does not
start immediately after
pressing the COOLMATIC,
or after changing the tem-
perature.This is normal, no error has
occurred.The compressor starts after a
period of time.www.aeg.com8  
						

							ProblemPossible causeSolutionWater flows inside the re-
frigerator.The water outlet is clog-
ged.Clean the water outlet.Food products prevent that
water flows into the water
collector.Make sure that food products
do not touch the rear plate.Water flows on the floor.The melting water outlet is
not connected to the evap-
orative tray above the com-
pressor.Attach the melting water out-
let to the evaporative tray.Temperature cannot be set.The FROSTMATIC or
COOLMATIC function is
switched on.Switch off FROSTMATIC or
COOLMATIC manually, or wait
until the function resets auto-
matically to set the tempera-
ture. Refer to "FROSTMATIC
or COOLMATIC function".The temperature in the ap-
pliance is too low/too high.The temperature regulator
is not set correctly.Set a higher/lower tempera-
ture.The food products' temper-
ature is too high.Let the food products temper-
ature decrease to room tem-
perature before storage.Many food products are
stored at the same time.Store less food products at the
same time.The COOLMATIC function
is switched on.Refer to "COOLMATIC func-
tion".If the advice does not lead
to the desired result, contact
the nearest Authorised
Service Centre.6.2  Replacing the lamp
The appliance is equipped with a longlife
LED interior light.
Only service is allowed to replace the
lighting device. Contact your Authorised Service Centre.7.  INSTALLATIONWARNING!
Refer to Safety chapters.7.1  Positioning
This appliance can be installed in a dry,
well ventilated indoor where the ambient
temperature corresponds to the climate
class indicated on the rating plate of the
appliance:Climate
classAmbient temperatureSN+10°C to + 32°CENGLISH9   
						

							Climate
classAmbient temperatureN+16°C to + 32°CST+16°C to + 38°CT+16°C to + 43°C7.2  Electrical ConnectionCAUTION!
Any electrical work required to install this appliance
should be carried out by a
qualified electrician or
competent person.WARNING!
This appliance must be
earthed.
The manufacturer declines
any liability should these
safety measures not be
observed.
The wires in the mains lead are coloured
in accordance with the following code:
• A - green and yellow: Earth
• C - brown: Live
• D - blue: Neutral
As the colours of the wires in the mains
lead of this appliance may not
correspond with the coloured markings
identifying the terminals in your plug,
proceed as follows:
1. Connect the wire coloured green and
yellow to the terminal marked either
with the letter “E“ or by the earth
symbol 
 or coloured green and
yellow.
2. Connect the wire coloured blue to
the terminal either marked with the
letter “N“ or coloured black.
3. Connect the wire coloured brown to
the terminal either marked with the
“L“ or coloured red.
4. Check that no cut, or stray strands of
wire is present and the cord clamp
( E ) is secure over the outer sheath.
Make sure the electricity supply
voltage is the same as that indicated on the appliance rating plate.
5. Switch on the appliance.
The appliance is supplied with a 13 amp
fuse ( B). In the event of having to change
the fuse in the plug supplied, a 13 amp
ASTA approved (BS 1362) fuse must be
used.
WARNING!
A cut off plug inserted into a
13 amp socket is a serious
safety (shock) hazard. Ensure
that it is disposed of safely.7.3  Installation of the
appliance and door reversalPlease refer to separate
instructions on installation
(ventilation requirements,
levelling) and door reversal.8.  TECHNICAL DATAHeight1544 mmWidth595 mmDepth668 mmVoltage230 - 240 VFrequency50 Hzwww.aeg.com10  A BC D E