AEG Front loader washing machine L99699FL User Manual
Here you can view all the pages of manual AEG Front loader washing machine L99699FL User Manual. The AEG manuals for Washing Machine are available online for free. You can easily download all the documents as PDF.
Page 21
10.11 Interrupting a programme and changing the options You can change only some options before they operate: 1. Touch button Start/Pause. The related indicator flashes. 2. Change the options. 3. Touch button Start/Pause again. The washing programme continues.10.12 Cancelling a running programme 1. Press button Auto Off to cancel the programme and to deactivate the appliance. 2. Press button Auto Off again to activate the appliance. Now, you can set a new washing programme. Before starting the new...
Page 22
10.16 AUTO OFF option The AUTO OFF function automatically deactivates the appliance to decrease the energy consumption when: • You do not use the appliance for 5 minutes before you press Start/Pause button. Press the button Auto Off to activate the appliance again. • After 5 minutes from the end of the washing programme Press the button Auto Off to activate the appliance again.The display shows the end of the last set programme. Turn the programme knob to set a new cycle.If you set a programme or an...
Page 23
a dosing ball (supplied by the detergent's manufacturer).11.4 Ecological hints • Set a programme without the prewash phase to wash laundry withnormal soil. • Always start a washing programme with the maximum load of laundry allowed. • If necessary, use a stain remover when you set a programme with a low temperature. • To use the correct quantity of detergent, check the water hardnessof your domestic system. Refer to"Water hardness". 11.5 Water hardness If the water hardness in your area is...
Page 24
12.6 Cleaning the detergent dispenser1.2.3.4.12.7 Cleaning the drain filterDo not clean the drain filter if the water in the appliance is hot.1.2.www.aeg.com2412 12 21 1
Page 26
12.8 Cleaning the inlet hose and the valve filter1.2.3.4.12.9 Emergency drain Because of a malfunction, the appliance cannot drain the water. If this occurs, do steps (1) through (9) of 'Cleaning the drain filter'. If necessary, clean the pump. When you drain the water with the emergency drain procedure, you must activate the drain system again: 1. Put 2 litres of water in the main wash compartment of the detergent dispenser. 2. Start the programme to drain the water.12.10 Frost precautions If...
Page 27
13. TROUBLESHOOTINGWARNING! Refer to Safety chapters.13.1 IntroductionThe start of the appliance does not occur or it stops during operation. First try to find a solution to the problem (refer to the table). If not, contact the Authorised Service Centre.CAUTION! Deactivate the appliance before you do the checks. With some problems, the acoustic signals operate and the display shows an alarm message. 13.2 Possible failures Problems with alarm messages MessagePossible solutionThe display tells to check...
Page 28
MessagePossible solutionThe display tells there is a water alert.The anti-flood device is activated: • Disconnect the appliance. • Close the water tap. • Contact the service centre.The display tells that the main supply is unstable.Wait until the mains supply is stable. The appliance auto- matically starts operating. Problems without alarm messages ProblemPossible solutionThe programme does not start.Make sure that the mains plug is connected to the mains socket. Make sure that there is not a damaged...
Page 29
ProblemPossible solution Set the drain or the spin programme if there is water in the drum.Make sure that the appliance receives electrical power.This problem may be caused by a failure of the appli- ance. Contact the Authorised Service Centre. If you need to open the door, please read carefully «Emergency door opening».The appliance makes an un- usual noise.Make sure the levelling of the appliance is correct. Refer to 'Installation'. Make sure that the packaging and/or the transit bolts are...
Page 30
After the check, activate the appliance. The programme continues from the point of interruption. If the problem occurs again, contact the Authorised Service Centre. If the display shows other alarm codes. Deactivate and activate the appliance. If the problem continues, contact the Authorised Service Centre.14. EMERGENCY DOOR OPENINGIn case of power failure or functioning failure the appliance door remainslocked. The washing programme continues when the power is restored. If the door remains locked in...