AEG Integrated coffee machine PE4571M User Manual
Have a look at the manual AEG Integrated coffee machine PE4571M User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 513 AEG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable per- formance for many years, with innovative technologies that help make life simpler – fea- tures you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. Visit our website to: get tips, download our leaflets, resolve possible malfunctions, obtain information on customer care. www.aeg.com register your product and receive a better service: www.aeg.com/productregistration purchase accessories, consumables and original spare parts for your appliance. www.aeg.com/shop CUSTOMER SERVICE AND MAINTENANCE We recommend always using original spare parts. Always have the following information at hand when you contact customer services. You can find the information on the rating plate. Model, appliance number (PNC), serial number. Subject to changes
6 CONTENTS INTRODUCTION .........................................7 Symbols used in these instructions .................................7 Letters in brackets ............................................................7 Troubleshooting and repairs ............................................7 SAFETY .....................................................7 Fundamental safety warnings..........................................7 Designated use ................................................................8 Instructions .....................................................................8 DESCRIPTION ............................................8 Description of the appliance ...........................................8 Description of the control panel .......................................9 Description of milk container and accessories ..................9 PRELIMINARY CHECKS ...............................9 Controls after transport ...................................................9 Installing the appliance ...................................................9 Connecting the appliance ................................................9 USING THE APPLIANCE FOR THE FIRST TIME 10 TURNING ON AND HEATING UP .................10 MAKING COFFEE USING COFFEE BEANS ....10 CHANGING THE QUANTITY OF COFFEE IN THE CUP .......................................................11 ADJUSTING THE COFFEE MILL ...................12 MAKING ESPRESSO COFFEE WITH PRE- GROUND COFFEE (INSTEAD OF BEANS) ......12 DELIVERING HOT WATER ..........................12 CHANGING THE QUANTITY OF HOT WATER .12 MAKING CAPPUCCINO ..............................13 CHANGING THE QUANTITY OF MILK AND COF- FEE FOR CAPPUCCINO ..............................13 Changing the quantity of milk .......................................13 Changing the quantity of coffee .....................................14 MAKING A NUMBER OF CUPS OF COFFEE WITH THE JUG FUNCTION .................................14 CHANGING JUG FUNCTION PARAMETERS ..14 CLEANING ..............................................15 Cleaning the coffee maker .............................................15 Cleaning the waste coffee container ..............................15 Cleaning the drip tray ....................................................15 Cleaning the water tank .................................................16 Cleaning the spouts .......................................................16 Cleaning the pre-ground coffee funnel ..........................16 Cleaning the inside of the coffee maker .........................16 Cleaning the brewing unit .............................................16 Cleaning the milk container ...........................................16 Cleaning the coffee jug ..................................................17 CHANGING AND SETTING MENU PARAMETERS ...17 Setting the language ....................................................17 Rinsing ........................................................................\ ..17 Changing the length of time the appliance remains on .17 Setting the clock ............................................................18 Setting auto-start time ..................................................18 Changing coffee temperature ........................................18 Setting water hardness .................................................18 Programming coffee ......................................................18 Programming cappuccino ..............................................18 Programming the jug .....................................................18 Programming water .......................................................18 Descaling .......................................................................18 Resetting default values (reset) .....................................19 Statistics ........................................................................\ 19 Buzzer ........................................................................\ ...19 Adjusting contrast ..........................................................19 TURNING THE APPLIANCE OFF .................20 TECHNICAL SPECIFICATION .......................20 DISPLAYED MESSAGES .............................21 TROUBLESHOOTING ................................22 EN
67 INTRODUCTION Symbols used in these instructions Important warnings are identified by these symbols. It is vital to respect these warnings. Failure to observe the instructions could result in electric shock, serious injury, burns, fire or dam- age to the appliance. Danger! Failure to observe the warning could result in possibly life threatening injury from electric shock. Important! Failure to observe the warning could result in injury or damage to the appliance. Danger of burns! Failure to observe the warning could result in scalds or burns. N.B.! This symbol identifies important advice or information for the user. Letters in brackets The letters in brackets refer to the legend in the Description of the Appliance on page 3. Troubleshooting and repairs In the event of problems, follow the information given in the sections “Displayed messages” and “Troubleshooting”. If this does not resolve the problem, you should consult Custom- er Services. For repairs, contact Customer Services only. SAFETY Fundamental safety warnings The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Never immerse the appliance in water. This is an household appliance only. It is not intended to be used in: staff kitchen areas in shops, offices and other working environments; farm houses; by clients in hotels, motels and other residential type environments; bed and breakfast type environments. If the plug or power cable is damaged, it must be replaced by customer services only to avoid all risk. FOR EUROPEAN MARKETS ONLY: This appliance can be used by children aged from 8 years and above if they have been given supervision or instruction concerning use of the appliance in a safe way and if they under- EN
8 Danger! This is an electrical appliance, it is therefore important to respect the following safety warnings: • Never touch the appliance with damp hands. • Never touch the plug with damp hands. • Make sure the socket used is freely accessible at all times, enabling the appliance to be unplugged when necessary. • Unplug directly from the plug only. Never pull the power cable as you could damage it. • To disconnect the appliance completely, place the main switch (A23) on the side of the appliance in the 0 position. • If the appliance is faulty, do not attempt to repair. Turn it off using the main switch (A23), unplug from the mains socket and contact Customer Services. Important! Keep all packaging (plastic bags, polysty- rene foam) away from children. Danger of burns! This appliance produces hot water and steam may form while it is in operation. Avoid contact with splashes of water or hot steam. Use knobs and handles. Important! Do not grasp the coffee maker when it is out of the cabinet. Do not rest recipients containing liquids or inflammable or cor- rosive materials on top of the appliance. Place the accessories required to make the coffee (the measure for example) in the special holder. Do not rest large objects which could obstruct movement or un- stable objects on the appliance. Important! Do not use the appliance when extracted. Make sure the appliance is inactive before extracting it. The only exception is adjusting the coffee mill which must be done with the machine out (see the section “Adjusting the coffee mill”). N.B.: Use original or manufacturer recommended acces- sories and spare parts only. Designated use This appliance is designed and made to prepare coffee and heat drinks. All other use is considered improper. This appliance is not suitable for commercial use. The manufacturer is not liable for damage deriving from improp- er use of the appliance. This appliance can be installed over a built-in oven if the latter is fitted with a cooling fan at the rear (maximum microwave power: 3 kW). Instructions Read these instructions carefully before using the appliance. • Keep these instructions • Failure to respect these instructions may result in burns or damage to the appliance. The manufacturer is not liable for damage deriving from failure to respect these instructions. stand the hazard involved. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised. Keep the appliance and its cord out of the reach of children aged less than 8 years. Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction con- cerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. When not in use and before cleaning, always unplug the appliance. Surfaces marked with this symbol become hot during use (the symbol is present in certain models only). EN
89 N.B.! The appliance has a cooling fan. This comes on whenever coffee, steam or hot water is delivered. After several minutes, the fan goes off automatically. DESCRIPTION Description of the appliance (page 3 - A) A1. Cup tray A2. Service door A3. Coffee guide A4. Waste coffee container A5. Brewing unit A6. Cup tray lights A7. On/OFF/stand-by button A8. Control panel A9. Jug A10. Hot water and steam nozzle A11. IEC connector A12. Water tank A13. Coffee spout (adjustable height) A14. Drip tray A15. Bean container lid A16. Bean container A17. Grinding adjustment knob A18. Pre-ground coffee funnel door A19. Measure A20. Compartment for measure A21. Pre-ground coffee funnel A22. Power cable A23. Main switch A24. Tray Description of the control panel (page 3 - B) N.B.! Only icons B6, B7, B8, B9 and B14 concerning the enabled commands will light up on the control panel. N.B.! A light touch is enough to activate the icon. B1. Display: guides the user in using the appliance. B2. icon to activate or deactivate menu parameter set- ting mode B3. icon to turn lights A6 on and off B4. icon to select the coffee taste B5. icon to select the type of coffee (espresso, small cup, medium cup, large cup, mug) B6. ESC icon to exit the selected mode B7-B8. icons to scroll forwards or backwards through the menu and display the various modes B9. OK icon to confirm the selected function B10. icon to deliver a cup of coffee B11. icon to deliver two cups of coffee B12. icon to deliver cappuccino B13. icon to deliver hot water B14. “jug” icon to make a number of cups of coffee directly in the jug (provided) Description of milk container and accessories (page 3 - C) C1. Frothed milk regulator C2. Milk container handle C3. CLEAN button C4. Milk intake tube C5. Frothed milk spout C6. Milk frother C7. Hot water spout PRELIMINARY CHECKS Controls after transport After removing the packaging, make sure the product is com- plete and undamaged and that all accessories are present. Do not use the appliance if it is visibly damaged. Contact Customer Services. Installing the appliance Important! • Installation must be performed by a qualified professional in compliance with legislation in force in the country of in- stallation (see Built-in installation). • The packing elements (plastic bags, polystyrene foam, etc.) should be kept out of reach of children. • Do not install the appliance in rooms where the tempera- ture may drop to 0°C or lower. • Customise the water hardness as soon as possible following the instructions in the “Setting water hardness” section. Connecting the appliance Danger! Check that the mains power supply voltage corresponds to the value indicated on the rating plate on the EN
10 bottom of the appliance. Connect the appliance to an efficiently earthed and correctly in- stalled socket with a minimum current rating of 10A only. If the power socket does not match the plug on the appliance, have the socket replaced with a suitable type by a qualified pro- fessional.To comply with safety directives, an omnipolar switch with a minimum contact distance of 3 mm must be installed. Do not use multiple sockets or extensions. Important! Safety cutout devices must be included in the mains power supply in compliance with the installation regulations in the country concerned. Disposing of the appliance In compliance with European directive 2002/96/EC, the appliance must not be disposed of with household waste, but taken to an authorised waste separation and recycling centre. USING THE APPLIANCE FOR THE FIRST TIME • Coffee has been used to factory test the appliance and it is therefore completely normal for there to be traces of coffee in the mill. • Customise water hardness as soon as possible following the instructions in the “Setting water hardness” section. 1. Connect the appliance to the mains supply. Set the required language. 2. To set the language, use the icons (B7 and B8) to choose the required language (fig. 2). When the message “PRESS OK TO CHOOSE ENGLISH” is displayed, press the OK icon (B9) (fig. 3) for 3 seconds until “ENGLISH INSTALLED” is displayed. If you set the wrong language, follow the in- structions in the “Setting the language” section. If your language is not available, select one from those dis- played. The instructions refer to the English version. Then follow the instructions displayed: 3. After 5 seconds, the appliance displays “FILL TANK”. Extract the water tank (fig. 4), rinse and fill with fresh water with- out exceeding the MAX line. Replace and push as far as it will go. 4. Place a cup under the hot water spout (fig. 5). (If the hot water spout is not inserted, the appliance displays “INSERT WATER SPOUT”. Attach it as shown in figure 6. The appliance displays: “HOT WATER PRESS OK”. Press the OK icon (B9) (fig. 3) and after a few seconds a little water comes out of the spout. 5. The machine now displays “TURNING OFF... PLEASE WAIT” and goes off. 6. Extract the appliance by pulling it out using the handles (fig. 7). Open the lid and fill the container with coffee beans, then close the lid and push the appliance in. The coffee maker is now ready for normal use. Important! Never introduce pre-ground coffee, freeze dried coffee, caramelised beans or anything else which could damage the appliance. N.B.! When using the appliance for the first time, you need to make 4-5 cups of coffee and 4-5 cappuccinos before the appliance gives satisfactory results. N.B.! Each time you turn the coffee maker on by the ON/ OFF switch (A23), it performs a SELF-DIAGNOSIS cycle and then goes off. To turn it on again, press the ON/OFF button (A7) (fig. 1) TURNING ON AND HEATING UP Each time the appliance is turned on, it performs an automatic preheat and rinse cycle which cannot be interrupted. The appli- ance is ready for use only after completion of this cycle. Danger of burns! During rinsing, a little hot water flows from the coffee spouts. To turn the appliance on, press the ON/OFF/stand-by button (A7) (fig. 1). The message “HEATING UP... PLEASE WAIT” is displayed. When heating is complete, the message changes to “RINSING”; The appliance is at temperature when the message “MEDIUM CUP NORMAL TASTE” is displayed. If no icon is pressed within about 2 minutes, the time (if set, see the “Setting the clock” section) is displayed. If the time has not been set, the appliance displays the last func- tions set. When any icon is pressed, “MEDIUM CUP NORMAL TASTE” is dis- played again. The appliance is ready to make coffee again. MAKING COFFEE USING COFFEE BEANS 1. The appliance is preset to make coffee with a normal taste. You can also choose coffee with an extra-mild, mild, strong or extra-strong taste. There is also a pre-ground coffee op- tion. To choose the required taste, press the icon (B4) EN
1011 (fig. 8) a number of times. The required coffee taste is dis- played. 2. Place 1 cup under the spouts to make 1 coffee (fig. 9) or 2 cups for 2 coffees (fig. 9). Lower the spouts as near as possi- ble to the cup for a creamier coffee (fig. 10). 3. Press the (B5) icon (B5) (fig. 11) to select the type of coffee: espresso, small cup, medium cup, large cup, mug. Now press the (icon (B10) (fig. 12) if you want to make a coffee and the icon (B11) (fig. 13) if you want to make 2 coffees. The appliance now grinds the beans and starts delivering the coffee into the cup. Once the set amount of coffee has been delivered, the ma- chine stops delivery automatically and expels the exhaust- ed waste coffee into the waste coffee container. 4. After a few seconds, the appliance is ready for use again. 5. To turn the appliance off, press the ON/OFF/stand-by but- ton (A7) (fig. 1). (Before going off, the appliance performs an automatic rinse cycle. Take care to avoid scalds). NOTE 1: If the coffee is delivered a drop at a time or not at all, see the “Adjusting the coffee mill” section. NOTE 2: If the coffee is delivered too fast and the cream is not satisfactory, see the “Adjusting the coffee mill” section. NOTE 3: Tips for a hotter coffee: • Proceed as described in the section “Changing and setting menu parameters”, “Rinse” function. • Unless preheated, do not use excessively thick cups as they will absorb too much heat. • Preheat the cups by rinsing them with hot water. NOTE 4: Coffee delivery can be interrupted at any moment by re-pressing the previously selected icon which remains lit during the operation. NOTE 5: As soon as delivery is finished, to increase the quantity of coffee in the cup, just keep pressing the previously selected icon within 3 seconds after delivery has finished. NOTE 6: When the appliance displays “FILL TANK”, fill the tank with water or the appliance will not deliver coffee. (It is normal for there to be a little water left in the tank). NOTE 7: After about 14 single (or 7 double) coffees, the appliance displays “EMPTY WASTE COFFEE CONTAINER”. Even if not full, the empty waste coffee container message is dis- played 72 hours after the first coffee has been delivered. For the 72 hours to be calculated correctly, the machine must never be turned off with the main switch in the 0 position. To clean, open the service door on the front of the appliance by pulling the spout (fig. 16), extract the drip tray (fig. 17) and clean. When cleaning, always extract the drip tray completely. Important! When extracting the drip tray, the waste coffee container MUST always be emptied. If this is not done, the machine may be clogged. NOTE 8: Never extract the water tank while the machine is de- livering coffee. If it is removed, it will not be possible to make the coffee and the appliance will display “GROUND TOO FINE ADJUST MILL AND PRESS OK” and then “FILL TANK”. Check the level of water in the tank and replace in the appliance. To turn the appliance back on, insert the water spout if not al- ready in place (fig. 6), then press the OK icon (B9). “HOT WATER PRESS OK” is displayed. Press the OK icon (B9) within a few seconds and deliver water from the spout for about 30 seconds. When delivery stops, the basic modes are displayed again. N.B.: The coffee maker may request the operation to be repeated a number of times until the air is completely elminated from the hydraulic circuit. N.B.: if this operation is not performed correctly or if the machine is turned off, the basic modes may be displayed, although the problem is in fact still present. CHANGING THE QUANTITY OF COF- FEE IN THE CUP The appliance is set by default to automatically make the follow- ing types of coffee: • espresso • small cup • medium cup • large cup • mug EN
12 To change the quantity, proceed as follows: • Press the icon (B2) to enter the menu (fig. 15). Press the icons (B7) and (B8) (fig. 2) until “PROGRAM COF- FEE” is displayed. • Press the OK icon (B9). • Select the type of coffee you want to change by pressing the icons (B7) and (B8). • Press the OK icon (B9) to confirm the type of coffee you want to make. • Use the icons (B7) and (B8) to change the quantity of coffee. The progress bar shows the quantity of coffee se- lected. • Press the OK icon (B9) again to confirm (or the icon (B6) to cancel the operation). • Press the ESC (B6) icon (B6) (fig. 18) twice to exit the menu. The appliance is now reprogrammed with the new settings and is ready. ADJUSTING THE COFFEE MILL The coffee mill is preset in the factory and should not require adjusting. However, if after making the first few coffees you find that delivery is either too fast or too slow (a drop at a time), this can be corrected by adjusting the grinding adjustment knob (fig. 14). Important! The grinding adjustment knob must only be turned when the coffee mill is in operation. For slower delivery and creamier coffee, turn one click anticlock- wise (finer pre-ground coffee). For faster delivery (not a drop at a time), turn one click clockwise (coarser pre-ground coffee). PREPARING COFFEE WITH PRE- GROUND COFFEE (INSTEAD OF BEANS) • Press the (B4) icon (B4) (fig. 8) and select the pre- ground coffee function. • Extract the machine by pulling it outwards using the han- dles (fig. 7). • Lift the central lid, place one measure of pre-ground coffee in the funnel (fig. 19), push the appliance in then proceed as described in the section “Making coffee using coffee beans”. N.B.: You can make just one coffee at a time by pressing the icon (B10) (fig. 12). • After using the machine with pre-ground coffee, to go back to making coffee using beans, deactivate the pre-ground coffee function by pressing the icon (B4) (fig. 8). NOTE 1: Never introduce pre-ground coffee when the machine is off or it could spread through the inside of the appliance. NOTE 2: Never add more than 1 measure, otherwise the appli- ance will not make the coffee. NOTE 3: Use the measure provided only. NOTE 4: Introduce only pre-ground coffee for espresso coffee machines into the funnel. NOTE 5: If more than one measure of pre-ground coffee is used and the funnel clogs, push the coffee down with a knife (fig. 21) then remove and clean the brewing unit and machine as de- scribed in the “Cleaning the brewing unit” section. DELIVERING HOT WATER • Always make sure the appliance is ready. • Turn the cappuccino maker outwards and place a container underneath (fig. 6). • Press the icon (B13) (fig. 20). The appliance displays: “HOT WATER PRESS OK”. Press the OK icon (B9) again and hot water is delivered from the cappuccino maker into the container underneath. (You should not deliver hot water for more than 2 minutes at a time). To interrupt, press the icon (B13) or the ESC icon (B6). The appliance stops delivery once the set quantity is reached. CHANGING THE QUANTITY OF HOT WATER The machine is set by default to automatically delivery 200 ml of hot water. To change these quantities, proceed as follows: • Place a container underneath the cappuccino maker (fig. 5). • Press the(B2) to enter the menu (fig. 15) or press the icons (B7) and (B8) (fig. 2) until “PROGRAM HOT WATER” is displayed. • Press the OK icon (B9) to confirm. EN
1213 • Select the required quantity of water by pressing the icons (B7) and (B8). The progress bar shows the quantity of water selected. • Press the OK icon (B9) to confirm (or the ESC icon (B6) to cancel the operation. • Press the ESC (B6) icon (B6) (fig. 18) twice to exit the menu. • The appliance is now reprogrammed with the new settings and is ready. MAKING CAPPUCCINO N.B.: Set the quantity of coffee you want to use to make the cappuccino in the “Program cappuccino” function in the menu. • Select the taste of the coffee you want to use to make the cappuccino by pressing the icon (B4). • Remove the lid of the milk container. • Fill the container with about 100 grams of milk for each cappuccino to be prepared (fig. 23). Never exceed the MAX level (corresponding to about 750 ml) marked on the con- tainer. You should ideally use skimmed or semi-skimmed milk at refrigerator temperature (about 5°C). • Make sure the intake tube is correctly inserted in the rubber washer (fig. 24) then replace the milk container lid. • Position the frothed milk regulator (C1) between the words CAPPUCCINO and CAFFELATTE printed on the milk container lid. The quantity of froth can be adjusted by moving the regu- lator towards the word CAFFELATTE for a denser froth. Mov- ing it towards the word CAPPUCCINO obtains a less dense froth. • Remove the hot water spout (fig 6) and attach the milk container to the nozzle (fig. 25). • Position the milk spout as shown in fig. 26 and then place a sufficiently large cup under the coffee and milk spouts. • Press the icon (fig. B12). “CAPPUCCINO...” is displayed and after a few seconds, frothed milk flows out of the milk spout into the cup below. (La fuoriuscita del latte si inter- rompe automaticamente). (Delivery stops automatically). • The appliance delivers coffee. • The cappuccino is now ready. Sweeten to taste and, if de- sired, sprinkle the froth with a little cocoa powder. NOTE 1: While making cappuccino, the flow of frothed milk or coffee can be interrupted by pressing the icon (B12). NOTE 2: If the milk in the container finishes while delivering frothed milk, remove the container and add milk. Reattach and press the (B12) to request a cappuccino again. NOTE 3: To ensure the complete cleanliness and hygiene of the milk frother, always clean the circuits in the milk container lid after making cappuccino. “PRESS CLEAN!” flashes on the display. • Place a recipient under the milk spout (fig. 26). • Press the CLEAN button on the lid (C3) and hold down for at least 5 seconds (fig. 26) to start the cleaning function. The appliance displays the message “CLEANING!” above a progressive bar. You should not release the CLEAN button until the bar is complete indicating that cleaning is concluded. When the CLEAN button is released, the function stops. After cleaning, remove the milk container and place in the refrigerator. The milk should not be left out of the refrigerator for more than 15 minutes. NOTE 4: To change the quantity of coffee or frothed milk the ap- pliance delivers automatically into the cup, proceed as described in the section “Changing the quantity of coffee and milk for cap- puccino”. CHANGING THE QUANTITY OF COF- FEE AND MILK FOR CAPPUCCINO The appliance is set by default to automatically deliver a normal cappuccino. To change these quantities, proceed as follows: Changing the quantity of milk • Fill the container with milk up to the maximum level indi- cated on the container. • Press the icon (B2) to enter the menu (fig. 15), then press the icons (B7) and (B8) (fig. 2) until “PRO- GRAM CAPPUCCINO” is displayed. • Press the OK icon (B9) to confirm. “PROGRAM MILK” is dis- played. • Press the OK icon (B9) again. • Select the quantity of milk required by pressing the icons (B7) and (B8). The progress bar shows the quantity of NO froth “Denser” froth frothed milk regulator “Less dense” froth EN
14 milk selected. • Press the OK icon (B9) to confirm (or the ESC icon (B6) to cancel the operation. • Press the ESC (B6) icon (B6) (fig. 18) twice to exit the menu. Changing the quantity of coffee • Press the (B2) icon (B2) to enter the menu (fig. 15), then press the icons (B7) and (B8) (fig. 2) until “PROGRAM CAPPUCCINO” is displayed. • Press the OK icon (B9) to confirm then the icons (B7 and (B8) (fig. 2) until “COFFEE FOR CAPPUCC.” is displayed. • Press the OK icon (B9) again. • Select the quantity of coffee required by pressing the icons (B7) and (B8). The progress bar shows the quantity of coffee selected. • Press the OK icon (B9) to confirm (or the ESC icon (B6) to cancel the operation. • Press the ESC icon (B6) (fig. 18) twice to exit the menu. MAKING A NUMBER OF CUPS OF COFFEE WITH THE JUG FUNCTION Using this function you can automatically make a number of cups of coffee (4, 6) directly in the jug (A9) to keep the coffee hot. • Turn the jug lid until the arrow lines up with the word OPEN and remove the lid. Rinse the jug and lid. • Close the jug by turning the lid towards CLOSE until it is tightly closed and then place it under the coffee spout. Always position the jug with the handle facing to the right or left as shown in the figure. The coffee spout (A13) must be fully raised to enable the jug to be inserted. “FILL BEAN CONT. AND WATER TANK, EMPTY WASTE CONT., PRESS OK” is displayed. Make sure the water tank is full, the bean container is full enough and the waste coffee contain- er is completely empty. • Press the OK icon (B9). The type of coffee selected, for example “EXTRA-MILD JUG”, and the number of cups you want to make with the jug are displayed, for example “JUG 4 CUPS”. • Confirm by pressing the icon (B14). The display shows a progress bar which indicates coffee making process. When the progress bar is complete, the appliance finishes the process and automatically goes back to the coffee jug function. If on the other hand an incomplete progress bar is dis- played, this means that the cycle has not been completed correctly. Remove the jug and check the message which appears on the display, consulting the section “DISPLAYED MESSAGES”. • Remove jug and leave the lid in the CLOSE position to keep the coffee hot. • To pour the coffee, turn the lid anticlockwise until the arrow is lined up with the spout of the jug. Important! When the coffee beans are insufficient to complete the required function, the appliance stops the process and waits for the bean container to be filled again and the icon (B14) to be pressed. For example, when you want to make 4 cups of coffee but the beans are insufficient, the appliance makes 2 cups then stops making coffee. Fill the bean container and press the icon (B14). Once the container has been filled, the appliance makes the 2 remaining cups only to reach the re- quired number of 4 cups. If there is not enough water in the tank to complete the required function or the waste coffee container is full, the appliance in- terrupts the process. To fill the water tank or empty the waste coffee container, you must remove the jug. This interrupts the programme. After rectifying the problem, the programme must be started again. In this case, you must take the amount of coffee already deliv- ered into account to avoid the jug overflowing. CHANGING JUG FUNCTION PA- RAMETERS The jug programme is factory set with default values. These can be modified to suit your personal taste and saved. You can select 5 different types of coffee from extra-mild to extra-strong and, with the aid of a graphic bar, 10 quantities of coffee. To make these adjustments, proceed as follows: EN