AEM AQ1 Mini Harness 3029060 User Manual

							  Page 11  10-2906-0 AQ1 Harness Instructions RevA 110707.doc 
RECOMMENDED PARTS 
 
30-51XX Analog Style Gauges 
30-44XX Digital Style Gauges 
30-2340 4 Channel UEGO Controller 
30-4100 Digital Gauge Style UEGO Controller 
30-5130 Analog Gauge Style UEGO Controller 
30-2310 Inline UEGO Controller 
30-2320 X-Wifi 
30-2130-XX Stainless Steel Body Pressure Sensor 
30-2131-XX Brass Body Pressure Sensor 
30-2010 GM Style Inlet Air Temp Sensor 
30-2011 GM Style Coolant Temp Sensor 
30-2012 Fluid Temp Sensor, 1/8” NPT 
 
If further tuning help is needed be sure to visit the video gallery or performance 
electronics forum at www.aemelectronics.com for comprehensive instructional videos 
and information. 
 
WARRANTY 
 
12 MONTH LIMITED WARRANTY 
 
Advanced Engine Management Inc. warrants to the consumer that all AEM High Performance products will be free from defects in 
material and workmanship for a period of twelve (12) months from date of the original purchase. Products that fail within this 12-
month warranty period will be repaired or replaced at AEM’s option, when determined by AEM that the product failed due to defects 
in material or workmanship. This warranty is limited to the repair or replacement of the AEM part. In no event shall this warranty 
exceed the original purchase price of the AEM part nor shall AEM be responsible for special, incidental or consequential damages 
or cost incurred due to the failure of this product.  Warranty claims to AEM must be transportation prepaid and accompanied with 
dated proof of purchase. This warranty applies only to the original purchaser of product and is non-transferable. All implied 
warranties shall be limited in duration to the said 12 month warranty period. Improper use or installation, accident, abuse, 
unauthorized repairs or alterations voids this warranty. AEM disclaims any liability for consequential damages due to breach of any 
written or implied warranty on all products manufactured by AEM. Warranty returns will only be accepted by AEM when 
accompanied by a valid Return Goods Authorization (RGA) number.  Product must be received by AEM within 30 days of the date 
the RGA is issued. 
 
Please note that before AEM can issue an RGA for any product, it is first necessary for the installer or end user to contact the AEM 
Performance Electronics tech line at 1-800-423-0046 to discuss the problem.  Most issues can be resolved over the phone.  Under 
no circumstances should a system be returned or a RGA requested before the above process transpires. 
 
Need additional help?  Contact the AEM Performance Electronics tech department at  
1-800-423-0046 or [email protected], or visit the AEM Performance Electronics 
forum at http://forum.aempower.com/forum/