Home > AEM > High Flow Fuel Pumps > AEM High Flow Inline Fuel Pump 501005 User Manual

AEM High Flow Inline Fuel Pump 501005 User Manual

Add to Favourites
    Download as PDF

    View the AEM High Flow Inline Fuel Pump 501005 User Manual for free. All the AEM manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 Part Number 50-1005 WARNING: ! This installation involves your vehicle’s fuel system and is not for the mechanically challenged! If you are not mechanically inclined or do not understand the procedures listed in the instructions please do not attempt the installation. Refer the installation to a reputable mechanic. AEM Performance Electronics 2205 126th Street Unit A, Hawthorne, CA. 90250 Phone: (310) 484-2322 Fax: (310)...
    Page 2 Page 2 10-1005 for Fuel Pump Kit 50-1005 CAUTION! Installation of the AEM Fuel Pump requires the installer to handle gasoline. It is imperative that all work is carried out in a well-ventilated area and a fire extinguisher rated for gasoline fires is within easy reach of all personnel working on the fuel system. Extinguish all open flames, prohibit smoking, and eliminate all sources of static electricity or any other source of ignition BEFORE proceeding with installation. Wear protective...
    Page 3 Page 3 10-1005 for Fuel Pump Kit 50-1005 Fuel Hose and Routing and Installation IMPROPER FUEL HOSE ROUTING AND INSTALLATION DRAMATICALLY INCREASES THE RISK OF FIRE. BE SURE TO FOLLOW THE FOLLOWING GUIDELINES:  It is important to ensure that the hoses or lines for the fuel delivery system are clean, not kinked, do not pass hot exhaust components and are terminated correctly. Inadequate fuel delivery often is the cause of calibration errors that may be detrimental to engine life.  NEVER...
    Page 4 Page 4 10-1005 for Fuel Pump Kit 50-1005 the fuel delivery system, measure the output of the system by activating the pump with the vehicle operating voltage and measure the volume of fuel delivered in 1 minute. Multiply the delivered value by 60 to get volume/hr. Electrical Requirement The supply voltage will affect the fuel delivery of the AEM Fuel Pump. The typical electrical system on modern cars is between 13.2 – 14.2 volts. Although the AEM fuel pump will run at lower voltages the...
    Start reading AEM High Flow Inline Fuel Pump 501005 User Manual

    Related Manuals for AEM High Flow Inline Fuel Pump 501005 User Manual

    All AEM manuals