Home > AEM > Peak & Hold Injector Driver > AEM Peak Hold Injector Driver 10 Channel 302710 User Manual

AEM Peak Hold Injector Driver 10 Channel 302710 User Manual

Add to Favourites
    Download as PDF

    View the AEM Peak Hold Injector Driver 10 Channel 302710 User Manual for free. All the AEM manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 Installation Instructions 10 Ch Peak & Hold Injector Driver PN 30-2710 WARNING: ,! This installation is not for the electrically challenged! Use this product with extreme caution! If you are uncomfortable with anything about this, please refer the installation to an AEM trained tuning shop or call 800-423-0046 for technical assistance. You should also visit the AEM Performance Electronics Forum at http://forum.aempower.com NOTE: AEM holds no responsibility for any engine damage that...
    Page 2 IMPORTANT! Read these instructions completely before attempting this installation! The AEM 10 Channel Peak & Hold Injector drivers contains 10 independent injector drive channels. It’s typical function is to allow full battery voltage to fuel injectors for rapid current rise, in order to produce positive injector opening. When load current reaches 4.1A, the injector driver reduces the load current to 1.1A and operates as a constant current sink. This condition holds the injector open and reduces...
    Page 3 • A poor ground connection is the leading cause of ignition problems. • Connect ground wires directly to the negative (-) battery terminal or engine block. • There must be a ground strap connecting the engine to the chassis. • If connecting a ground to the engine block, ensure it is a clean, paint free metal surface. There are 2 connectors on the end of the case: GREY Connector (INPUT) # Name Color Function 1. Inj 1 In Pink Inj 1 Trigger input 2. Inj 2 In Brown Inj...
    Page 4
    Start reading AEM Peak Hold Injector Driver 10 Channel 302710 User Manual
    All AEM manuals