Home > AEM > Series 2 Plug & Play EMS > AEM Series 2 Plug Play EMS 306320 User Manual

AEM Series 2 Plug Play EMS 306320 User Manual

Add to Favourites
    Download as PDF

    View the AEM Series 2 Plug Play EMS 306320 User Manual for free. All the AEM manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 ADVANCED ENGINE MANAGEMENT INC. 2205 126 th Street Unit A Hawthorne, CA. 90250 Phone: (310) 4842322 Fax: (310) 4840152 http://www.aempower.com Instruction Part Number: 106320  2010 Advanced Engine Management, Inc. Page 1 of 13 Installation Instructions for: EMS P/N 30-6320 2006 Mitsubishi EVO IX 20052006 Mitsubishi EVO IX (Euro) 20032004 Mitsubishi EVO VIII (RHD Euro) WARNING: ! This installation is not for the tuning novice nor the PC illiterate! Use this system...
    Page 2 Page 2 of 13 Thank you for purchasing an AEM Engine Management System. The AEM Engine Management System (EMS) is the resul t of extensive development on a wide variety of cars. Each system is engineered for the particular application. The AEM EMS differs from all others in several ways. The EM S is a stand alone system, which completely replaces the factory ECU and features un ique Plug and Play Technology, which means that each system is configured especial ly for your make and model of car...
    Page 3 Page 3 of 13 Read and understand these instructions BEFORE attempting to install this product. 1) Install AEMTuner software onto your PC The latest version of the AEMTuner software can be downloaded from the AEMTuner section of the AEM Performance Electronics forums. Series 2 units are not supported by the older AEMPro tuning software. 2) Remove the Stock Engine Control Unit a) Access the stock Engine Control Unit (ECU). The loc ation of the ECU is behind the glove box. b) Carefully...
    Page 4 Page 4 of 13 less than 0.2% or greater than 99.8%, this is considered a sensor error and may cause some functions including idle feedback and ac celeration fuel to operate incorrectly. 4) Ready to begin tuning the vehicle. a) Before starting the engine, verify that the fuel pu mp runs for a couple of seconds when the key is turned on and there is sufficient p ressure at the fuel rail. If a MAP sensor is installed, check that the Engine Load indicates something near...
    Start reading AEM Series 2 Plug Play EMS 306320 User Manual

    Related Manuals for AEM Series 2 Plug Play EMS 306320 User Manual

    All AEM manuals