AGFA AP DC1033m User Manual

AgfaPhoto DC-1033m   
 
6 
About Battery Type 
After replacing the batteries, please check the Battery Type in the setup menu (
 
page 20). 
Inserting the Memory Card 
You can use SD/SDHC Card with this digital camera. The memory card slot is located 
beneath the battery cover, adjacent to the battery compartment. 
    
Open the battery cover. 
y  Slide the battery cover in the 
direction indicated by the 
arrow.  
    
Insert the card. 
y  Insert the card with the label 
facing up and the arrow...

AgfaPhoto DC-1033m   
 
7 
DCF Protocol 
The DCF protocol defines the format for image file data as well as the directory structure 
for the memory card. Images that are taken by a DCF camera can be viewed on 
DCF-compatible cameras from other manufacturers. 
Setting the Display Language / Date & Time 
When using the camera for the first time after purchasing, be sure to choose a language 
and set the date & time before using the camera. 
Setting the Display Language 
    
Turn the power on, and set the...

AgfaPhoto DC-1033m   
 
8 
 
 
y Holding down 
 or   changes the values continuously. 
y  For date stamp setting (
page 39). 
    
Apply the setting. 
y  After adjusting the settings, press the SET or the MENU button to apply 
the setting. 
 
 
y  If the batteries are removed for longer than 48 hours, the Date and Time will need to 
be re-set. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
4 
 T T
i i
p p
s s
   
 C C
a a
u u
t t
i i
o o
n n
    

AgfaPhoto DC-1033m   
 
9 
Using the LCD Monitor 
The LCD monitor is used to compose images while recording, adjust settings and replay 
images. The following indicators may appear on the LCD monitor while recording or 
playing back images. 
REC mode 
 
 
1 
Recording mode (
page 13) 13 
White balance (page 37) 
 
2 
Flash (
page 29) 14 
Shutter speed (page 21) 
 
3 
Macro (
page 30) 15 
Shake warning (page 21) 
 
4 
Self-timer / Burst (
page 31) 16 
Aperture value (page 21) 
 
5 
Zoom indicator (
page...

AgfaPhoto DC-1033m   
 
10 
PLAYBACK mode 
 
1 
Playback mode (page 13) 7 
Recording info (page 11) 
 
2 
Protect (
page 46) 8 Histogram 
 
3 
Voice memo (
page 36) 9 Captured date & time 
 
4 File number / Total 
10 
Voice memo control (
page 36) 
 
5 
Battery (
page 5) 11  
DPOF (page 51) 
 
6 Storage media 
12 
Resolution (
page 27) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
y  Some information may not display correctly if you display images captured by 
other camera model. 
 
 C C
a a
u u
t t
i i
o o
n n
    

AgfaPhoto DC-1033m   
 
11  
Changing the LCD Status 
Press the SET/DISP button changes the LCD status as shown below: 
„ REC mode  
 
(A) OSD on          (B) Full OSD          (C)Guide line        (D) OSD off 
 
 
y  Use the “Guide line” to compose images easily before shooting images. 
„ PLAYBACK mode  
 
(A) OSD on                   (B) Full OSD                   (D) OSD off 
 
 
 
 
 
 
 
y  You cannot change the LCD status in the following situation: 
。 Manual exposure 
。 Recording movie clips or...

AgfaPhoto DC-1033m   
 
12 
Basic Operation 
Turning the Power On and Off 
   
Press the POWER button (n) to turn on 
the camera in the REC mode. 
y  The power turns on, the lens extends 
and the LED lights in green. 
 
Press the PLAYBACK button (o) to turn 
on the camera in the PLAYBACK mode. 
y  The power turns on, and an image 
displays on the LCD monitor (p).  
    
Press the POWER button (n) again to turn the power off. 
y  The power turns off, the lens retracts and the LED turns off. 
 
 
y  You...

AgfaPhoto DC-1033m   
 
13 
Changing the Mode 
You can record images and voices in the REC mode. And use the PLAYBACK mode to 
replay, delete, or edit images on the LCD monitor. 
Switching between REC mode and PLAYBACK mode   
In REC mode, press the PLAYBACK button 
(n) to switch to the PLAY mode. 
 
 
 
 
In PLAY mode, press the PLAYBACK (n) 
or the MODE (o) button to switch to the 
REC mode. 
 
Selecting the REC mode 
    
Set the camera to the REC mode 
(
page 13). 
   
Launch the mode palette. 
y...

AgfaPhoto DC-1033m   
 
14 
Display Title Description 
 Portrait  Blurring the background to focus on the subject. 
 Landscape  Used for the wide scenic views. 
 Sunset  Enhance the red hue for recording sunset images. 
 Backlight  Shooting the image of backlight object by changing metering. 
 Smile 
Capture Capture the most brilliant smile of characters. 
 Kids  Take a still image to capture moving kids. 
 Night Scene  Shooting the subject while keeping the background night scenery.
 Fireworks  Slow...

AgfaPhoto DC-1033m   
 
15 
Selecting the ASM mode 
    
Set the camera to the REC mode 
(
page 13). 
y  It cannot be switch to ASM mode 
while in Movie or Voice REC 
mode. 
   
Launch the ASM mode. 
y Press the ASM button (n) to 
toggle switch between Aperture 
Priority, Shutter Priority, Manual 
Exposure mode. 
y  For detail operation 
(
page32).  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1 
2