AGFA AP OPTIMA 103 User Manual

AgfaPhoto OPTIMA 103   
 
50 
 
Trim 
The Trim function allows you to trim an image to another image size. This function is only available for 
still images. 
 
To trim an image: 
1. Set the camera to Playback mode . 
2. Use the 
 or   keys to scroll and select an image 
to trim. 
3. Press the MENU button to launch the Playback menu. 
4. Select Trim. The Trim screen layout is displayed on 
the LCD monitor.
 
5. Use the Zoom dial to change size as zoom in/out.  
 
No Description 
1 Enlarged image 
2 4-way...

AgfaPhoto OPTIMA 103   
 51 
 
Resize 
Resizes a previously saved image and only resizing to a smaller size is available. 
 
 
 
To resize an image: 
1.  Set the camera to Playback mode . 
2.  Use the 
 or   keys to scroll and select an image 
to resize. 
3.  Press the  MENU button to launch the Playback menu. 
4.  Select  Resize . The Resize submenu is displayed on 
the LCD monitor. 
5.  Select size among: 8M, 5M, 3M, and VGA. Available 
size settings may vary depending on original image 
size....

AgfaPhoto OPTIMA 103   
 
52 
 
DPOF 
DPOF is the abbreviation for Digital Print Order Format, which allows you to embed printing 
information on your memory card. You can select the images to be printed and how many prints to 
make with the DPOF menu in the camera and insert the memory card to the card compatible printer. 
When the printer starts printing, it will read the embedded information on the memory card and print 
the specified images. 
 
To set DPOF: 
1. Press the MENU button to launch the...

AgfaPhoto OPTIMA 103   
 
53 
 
Using the Setup Menu 
You can access the Setup menu whether you are in Record or Playback mode. 
The Setup menu allows to configure general camera settings. 
 
To go to Setup Menu: 
1. Press Menu button   to launch the 
Record/Playback Menu. 
2. Use the 
 or   keys to switch the menu tab to 
Setup menu. 
3. Use the 
 or   keys to move through the menu 
selections. 
4. To select an item, press the SET button or 
 key. 
5. Change the submenu settings using the 4-way...

AgfaPhoto OPTIMA 103   
 
54 
 
Setting LCD Save 
Enable the LCD Save function to automatically decrease the 
LCD brightness to conserve battery power. When the 
camera is idle for 20 seconds, the LCD darkens. Press any 
button to resume to normal brightness. 
 
• The camera is idle when no buttons are pressed. LCD 
Save, though enabled, does not function during video 
playback, slideshow and video recording.
 
 
Setting Date & Time 
Use the Date & Time function to set the date and time of your camera....

AgfaPhoto OPTIMA 103   
 
55 
 
Setting TV Out 
Use the TV Out function to adjust video output signal to accommodate different regional settings. If TV 
out is not set correctly, the image may not display properly on TV. 
 
Available settings are: 
• NTSC. Applicable in Japan, USA, Canada, Taiwan and 
others. 
• PAL. Applicable in Europe, Asia (excluding Taiwan), 
Oceania and others.
 
 
 
 
Setting LCD Brightness 
Select a brightness level for the LCD monitor. 
Available settings are: 
• Auto: Auto...

AgfaPhoto OPTIMA 103   
 
56 
 
Reset All 
Use this function to reset the camera to its factory settings. 
However, the following settings are exceptions and not 
affected by Reset. 
• Date & Time 
• Language 
• TV Out 
• Custom White Balance data
 
Making Connections 
You can connect your camera to: TV, computer, or a printer. 
 
Connecting the Camera to a TV 
You can play back your images on a TV screen. Before connecting to any video devices, make sure to 
select NTSC/PAL to match the broadcast...

AgfaPhoto OPTIMA 103   
 
57 
 
5. The PC starts to detect the connection while the LCD 
monitor appears Connecting… 
6. Connection established after PC MODE appeared on 
the LCD monitor 
 
 
 
7. Access the files in the camera by your PC. 
 
 
• The camera’s internal memory and memory card would display as removable 
drives in PC.   
• After the connection, no image is displayed on the LCD monitor. 
  

AgfaPhoto OPTIMA 103   
 
58 
 
Connecting the Camera to a Printer  
You can print your images directly using a PictBridge compatible printer. 
 
1. Turn on your Printer. Check that the printer is 
turned on, there is paper in the printer, and there 
are no printer error messages. 
 
 
 
 
2. Connect one end of the USB cable to the printer 
while the other end to USB terminal on the 
camera. 
 
 
 
 
3. The USB mode menu appears on the screen. 
Select Printer by using the 
 or  key and 
press the SET...

AgfaPhoto OPTIMA 103   
 
59 
 To set Printer Settings 
1. Use the  or   key to specify a print option. 
2. Modify paper size and quality by the 
 or  keys. 
Available setting: 
• Paper size: Default / A4 / 4x6 
• Quality: Default / Fine / Normal 
3. Select Print on the screen for printing. 
Or Cancel to go back Print Mode. 
 
Start Printing 
• LCD monitor appears Now printing…. 
• Or press Menu button 
  to stop printing anytime.