AGFA AP OPTIMA 105 User Manual

							AgfaPhoto OPTIMA 105 
50 
 
Trim 
The Trim function allows you to trim an image to another image size. This function is only available for still 
images. 
 
To trim an image: 
1. Set the camera to Playback Mode . 
2. Use the 
 or   keys to scroll and select an image to 
trim. 
3. Press the MENU button to launch the Playback menu. 
4. Select Trim. The Trim screen layout is displayed on the 
LCD monitor.
 
5. Use the Zoom dial to change size as zoom in/out.  
 
No Description 
1 Enlarged image 
2 4-way indicator 
3 Trimmed size 
4  The approx. location of the trimmed area 
5 Image area 
 
 
  
      
 
 
6. Use the navigation controls to move the image. 
7. Press the SET button to apply changes. A menu selection appears. 
8. Select whether to:
 
• Overwrite. Save and replace the old file with the new one. 
• Save As. Save the new file as a new one. 
• Cancel. Cancel Trim. 
9. Press the SET button to save/cancel changes. 
 
 
 
• Trim function is not available for images with image size set to VGA. 
• All images will be trimmed in 4:3 ratio regardless of its original image ratio.  
						

							AgfaPhoto OPTIMA 105 
51 
 
Resize 
Resizes a previously saved image and only resizing to a smaller size is available. 
 
 
 
To resize an image: 
1. Set the camera to Playback Mode . 
2. Use the 
 or   keys to scroll and select an image to 
resize. 
3. Press the MENU button to launch the Playback menu. 
4. Select Resize. The Resize submenu is displayed on the 
LCD monitor. 
5. Select size among: 8M, 5M, 3M, and VGA. Available size 
settings may vary depending on original image size. 
Unavailable settings appear as gray icons in Resize 
submenu.  
6. After selecting size, a menu selection appears. Select 
whether to: 
• Overwrite. Save and replace old file with a new one. 
• Save As. Save the new file as a new one.   
• Cancel. Cancel resize. 
7. Press the SET button to save/cancel changes. 
 
 
 
Resize function is not available for images with image size set to VGA. 
 
Startup Image 
You can specify the startup image from the captured images for camera. 
 
1. Press the MENU button to launch the Playback menu. 
2. Select Startup Image. The menu selection appears. 
3. Select options: 
• System. Use camera default image. 
• My Photo. Use the 
 or   keys to scroll and select 
desired image. 
• Off. Disable the startup image. 
4. Press the SET button to apply changes.
 
 
 
The startup image will still be displayed startup even if the selected image was 
deleted. 
  
						

							AgfaPhoto OPTIMA 105 
52 
 
DPOF 
DPOF is the abbreviation for Digital Print Order Format, which allows you to embed printing information on 
your memory card. You can select the images to be printed and how many prints to make with the DPOF 
menu in the camera and insert the memory card to the card compatible printer. When the printer starts 
printing, it will read the embedded information on the memory card and print the specified images. 
 
To set DPOF: 
1. Press the MENU button to launch the Playback menu. 
2. Select DPOF. The submenu appears. Available settings 
are as follows: 
• Single. Select a single image to mark. 
• All. Mark all images in the memory card. 
• Reset. Reset all DPOF settings to initial default 
settings. 
 
 
  
 
To set DPOF on a single image/all images: 
1. Select Single or All on the DPOF submenu. 
2. For single image, use the 
 or   keys to scroll and 
select an image to mark for printing.   
3. Specify the number of copies. Use the 
 or  to 
increase/decrease number. 
4. Press the FUNC button to toggle between turning on/ off 
the date stamp. 
5. Press the SET button to save DPOF settings.
 
 
To reset DPOF: 
1. Select Reset on the DPOF submenu. A confirmation 
message appears. 
2. Select Yes. 
3. Press the SET button to reset DPOF settings.
 
 
 
 
Radial Blur 
The Radial Blur is an effect creates blurs around a point. 
 
To set Radial blur for an image: 
1. Use the  or   keys to specify the level of blurs. 
The adjusting result on preview synchronously while 
selecting the level. 
2. Press the SET button to proceed save options. 
3. Available settings are as follow: 
• Overwrite. Save and replace the old file with a 
new one. 
• Save As. Save the new file as a new one. 
• Cancel. Cancel Radial blur. 
 
 
  
						

							AgfaPhoto OPTIMA 105 
53 
 
Using the Setup Menu 
You can access the Setup menu whether you are in Record or Playback Mode. 
The Setup menu allows to configure general camera settings. 
 
To go to Setup Menu: 
1. Press Menu button   to launch the Record/Playback 
Menu. 
2. Use the 
 or   keys to switch the menu tab to Setup 
menu. 
3. Use the 
 or   keys to move through the menu 
selections. 
4. To select an item, press the SET button or 
 key. 
5. Change the submenu settings using the 4-way navigation 
control. 
6. Press the SET button to save and apply settings.
  
 
Setting Sounds 
Use the Sound menu functions to control the sounds produced by the camera. 
 
1. From the Setup menu, select Sounds. 
2. Adjusts sound settings. 
3. Press the SET button to apply changes.
 
 
Item Available Settings Description 
Startup Sound 1, Sound 2, 
Sound 3, Off Selects the startup sound when camera is turned on. 
Shutter On, Off Enables or disables shutter sound when Shutter button is 
pressed. Shutter sound is not available when recording videos 
or voice clips.
 
Beep 
volume 0-4  Adjusts volume. 
 
Setting Power Save 
The Power Save function allows you to set an idle time after 
which the camera automatically sets to sleep mode to save 
power. After a minute of being in sleep mode, the camera 
eventually turns off power. 
 
This function is not available in the following instances: 
• Recording a video or audio file 
• Playing a slideshow/video/audio file 
• Using the USB connector 
  
						

							AgfaPhoto OPTIMA 105 
54 
 
Setting LCD Save 
Enable the LCD Save function to automatically decrease the LCD 
brightness to conserve battery power. When the camera is idle 
for 20 seconds, the LCD darkens. Press any button to resume to 
normal brightness. 
 
• The camera is idle when no buttons are pressed. LCD 
Save, though enabled, does not function during video 
playback, slideshow, video recording and Pre-Composition 
scene mode shooting.
 
 
Setting Date & Time 
Use the Date & Time function to set the date and time of your camera. This function is useful in attaching 
date stamps on captured images. Your camera uses a 24-hour time format. 
 
1. Press the navigation controls to adjust date and time 
value. By holding down the 
 or   keys, the numeric 
values changes continuously. 
2. Press the SET button to apply changes. 
 
Setting Language 
Specify in which language menus and messages are to be displayed on the LCD monitor. 
 
1. Use the navigation control to scroll through the list and 
select the desired language.   
2. Press the SET button to confirm and apply settings.
 
 
Setting File Numbering 
This function allows you to select the method in which to assign file numbers to images. 
 
Available settings are: 
• Series. Assigns number to files in sequence even if the 
folder is changed. 
• Reset. Starts from 0001 each time the folder is changed. 
 
To understand folder and file structure of your camera, see 
About Folder and File Names on page 60.
 
 
  
						

							AgfaPhoto OPTIMA 105 
55 
 
Setting TV Out 
Use the TV Out function to adjust video output signal to accommodate different regional settings. If TV out 
is not set correctly, the image may not display properly on TV. 
 
Available settings are: 
• NTSC. Applicable in Japan, USA, Canada, Taiwan and 
others. 
• PAL. Applicable in Europe, Asia (excluding Taiwan), 
Oceania and others.
 
 
 
 
Setting LCD Brightness 
Select a brightness level for the LCD monitor. 
Available settings are: 
• Auto. Auto detects the LCD brightness. 
• Bright. Enhance the LCD brightness. 
• Normal. Normal LCD brightness. 
 
 
 
Setting Memory Kit 
This utility formats the internal memory (or memory card) and erases all stored images and data. 
 
Available settings are: 
• Format. Select to format currently used memory. 
• Copy to Card. Select to copy all files stored in the internal 
memory to the memory card.
 
 
 
• If the images were saved in the internal memory when inserting memory card 
into the camera. You can use Copy to Card function in order to copy all 
images from the internal memory into memory card. 
• If there is a memory card inserted in the memory slot, the camera 
automatically saves all files to the memory card. 
• If there is no memory card or the internal memory is empty, the Copy to Card 
function is disabled. 
  
						

							AgfaPhoto OPTIMA 105 
56 
 
Reset All 
Use this function to reset the camera to its factory settings. 
However, the following settings are exceptions and not affected 
by Reset. 
• Date & Time 
• Language 
• TV Out 
• Custom White Balance data
 
Making Connections 
You can connect your camera to: TV, computer, or a printer. 
 
Connecting the Camera to a TV 
You can play back your images on a TV screen. Before connecting to any video devices, make sure to 
select NTSC/PAL to match the broadcast standard of the video equipment you are going to connect to the 
camera. 
 
To connect your camera to a TV: 
 
1. Turn on the camera. 
2. Set the TV out to match the TV’s video out format. See 
Setting TV Out on page 55. 
3. Connect the USB/AV 3-in-1 cable to the USB port on the 
bottom of your camera.   
4. Connect the other end of the cable to the TV’s AV input port. 
5. The LCD monitor turns black and all images and video clips 
are displayed on the TV. 
 
 
 
Connecting the Camera to a PC  
You can transfer images, videos and audio files to your PC. 
 
1. Connect one end of the USB cable to an available USB port 
on your computer 
 
 
 
2. Connect the other end of the USB cable to the USB 
terminal on the camera. 
 
 
 
3. Turn on the camera.  
						

							AgfaPhoto OPTIMA 105 
57 
 
4. The USB Mode menu appears on the screen. Select 
Computer by using the 
 or   key and press the SET 
button. 
5. The PC starts to detect the connection while the LCD 
monitor appears Connecting… 
6. Connection established after PC Mode appeared on the 
LCD monitor 
 
 
 
7. Access the files in the camera by your PC. 
 
 
• The camera’s internal memory and memory card would display as removable 
drives in PC.   
• After the connection, no image is displayed on the LCD monitor. 
  
						

							AgfaPhoto OPTIMA 105 
58 
 
Connecting the Camera to a Printer  
You can print your images directly using a PictBridge compatible printer. 
 
1. Turn on your Printer. Check that the printer is turned on, 
there is paper in the printer, and there are no printer error 
messages. 
 
 
 
 
2. Connect one end of the USB cable to the printer while the 
other end to USB terminal on the camera. 
 
 
 
  
3. The USB Mode menu appears on the screen. Select 
Printer by using the 
 or   key and press the SET 
button. 
 
 
4. Enter the print mode and print the selected images.   
 
 
For details on the following page Setting the Print Mode 
Menu. 
 
 
Setting the Print Mode Menu 
Print Mode menu appears on the screen after the connection between a printer and your camera is 
established.  
 
Print Mode includes three major settings: 
 
• Print Select. An image can then be selected to print. 
 
• Print All. Prints all images. 
 
• Print Index. Prints all images as thumbnails. 
 
 
 
 
 
To set Print Select 
1. Use the  or   keys to scroll and select an image for 
printing.  
2. Specify the number of copies. Use the 
 or  key to 
increase/decrease number. 
3. Press the FUNC button to toggle between turning on/ off 
the date stamp. 
4. Press the SET button to enter printer settings. 
 
To set Print All and Print Index 
Repeat the same steps 2 to 4, then enter printer settings.     
						

							AgfaPhoto OPTIMA 105 
59 
 To set Printer Settings 
1. Use the  or   key to specify a print option. 
2. Modify paper size and quality by the 
 or  keys. 
Available setting: 
• Paper size: Default / A4 / 4x6 
• Quality: Default / Fine / Normal 
3. Select Print on the screen for printing. 
Or Cancel to go back Print Mode. 
 
Start Printing 
• LCD monitor appears Now printing…. 
• Or press Menu button 
  to stop printing anytime.