AGFA AP OPTIMA 3 User Manual

89
AgfaPhoto OPTIMA 3AgfaPhoto OPTIMA 3
Camera Views
Front ViewBack View
Right View
13254
6
7
8
9
10
11 

89
AgfaPhoto OPTIMA 3AgfaPhoto OPTIMA 3
9
AgfaPhoto OPTIMA 3
Top View
Left View
Bottom View
1Flash11Function/OK Button
2Lens12USB/AV Port
3AF assist beam/Timer indicator13Wrist Strap Mount
4LCD Screen14Power Button
5Mode Selection Button15Playback Button
6Menu Button16Shutter Button
7Disp/Up Button17Zoom Wheel
8Flash Mode/Right Button18Tripod Mount Point
9Delete Button/Down Button19Speaker
10Face Detection/Left button20Memory Card/Battery Compartment
16171514191820
13
12 

1011
AgfaPhoto OPTIMA 3AgfaPhoto OPTIMA 3

1011
AgfaPhoto OPTIMA 3AgfaPhoto OPTIMA 3

1. Place the battery into the charger as shown.
2.  Plug the one end of the connecting cable (plug 
adapter) into the charger base.
3.  Plug the other end of the connecting cable into a 
wall outlet.
1
2
Charging the Battery
Leave the battery to charge until the charger light turns green. (To maximize battery life, the first charge should be at least 4 hours)
The charger is for indoor use only. 

1011
AgfaPhoto OPTIMA 3AgfaPhoto OPTIMA 3

1011
AgfaPhoto OPTIMA 3AgfaPhoto OPTIMA 3

Insert the Battery and SD/SDHC Card (Not included)
2. Insert the battery while observing the correct polarity. Use the side of battery to press down the stopper as shown, allowing the battery to lock into place properly.
1. Open the battery compartment. 

12
AgfaPhoto OPTIMA 3
1213
4. Close the battery compartment.3. Insert  an  SD/SDHC  card  (not  included)  into  the memory card slot as shown. 

1213
AgfaPhoto OPTIMA 3
Optional SD/SDHC cards are not included. The use of 64 MB to 16 GB memory cards from recognized manufacturers such as SanDisk, Panasonic and Toshiba is recommended for reliable data storage.
To remove the SD/SDHC card, open the battery compartment and gently push the card to release it. Pull the card out carefully.
Turning On and Off
Press the Power button to turn the camera on. To turn off the camera, press the Power button again.
Power Button
When the camera is turned on, it...

1415
AgfaPhoto OPTIMA 3AgfaPhoto OPTIMA 3

1415
AgfaPhoto OPTIMA 3AgfaPhoto OPTIMA 3

Using the Mode Button
The AgfaPhoto camera provides a convenient mode Button that allows you to switch between different modes easily.  After  pressing  the  mode  button  to  enter  mode  selection  menu,  press  Left/Right  button  to  choose  the 
mode, press  to select. All the available modes are listed as follows: 
Mode NameIconDescription
Auto modeThe camera sets all the settings automatically.
Manual...

1415
AgfaPhoto OPTIMA 3AgfaPhoto OPTIMA 3

1415
AgfaPhoto OPTIMA 3AgfaPhoto OPTIMA 3

Setting Date/Time and Language
Setting the Date and Time
1. Press the menu button.  Scroll over to the 
General Setup menu indicated by a wrench icon. Use the Up/Down button to select Date/Time. Then press the Right button to enter the setting.
2.  Press  the 
Left/Right  to  highlight  each  field  and use the Up/Down to adjust the value.
3.  Press the 
 button to confirm the setting. 

16
AgfaPhoto OPTIMA 3
1617
AgfaPhoto OPTIMA 3AgfaPhoto OPTIMA 3
The Date/Time and Language setup will automatically appear when the camera is turned on the first time.
Setting the Language
1. Press the menu button.  Scroll over to the 
General Setup menu indicated by a wrench icon. Use the Up/Down button to go to the Language. Then press the Right button to enter the setting.
2.  Use the Left/Right buttons to select the desired 
language.
3.  Press the 
 button to confirm the setting. 

1617
AgfaPhoto OPTIMA 3AgfaPhoto OPTIMA 3
If the LCD monitor is damaged, take particular care with the liquid crystal in the monitor. If any of the following situations arise, take the recommended immediate action indicated below:
•  If liquid crystal comes in contact with your 
skin, wipe the area with a cloth and then wash thoroughly with soap and running water.
•  If liquid crystal gets into your eye, flush the 
affected eye with clean water for at least 15  minutes and then seek medical assistance....